-
FREE MEMBER
NO Posting or PM's Allowed
1918 Springfield Model 1903
Looking for collector value in this 1918 Springfield Model 1903 as well.
Thanks
Information
|
Warning: This is a relatively older thread This discussion is older than 360 days. Some information contained in it may no longer be current. |
|
-
11-01-2014 10:32 AM
# ADS
Friends and Sponsors
-
Legacy Member
What is the serial number? Lots of mixed parts there.
-
-
-
Advisory Panel
There's at least two proof Ps there, and yes, the serial number matters. If it's a 1918 receiver and barrel, why would it have a second proof on the stock? Something's out of whack. Don't get me wrong, nice clean rifle, I'd love to have it.
-
-
FREE MEMBER
NO Posting or PM's Allowed
1918 model has a serial number of 79XXXX. Bore is bright with clean rifling.
-
Advisory Panel

Originally Posted by
68GT390
Bore is bright with clean rifling.
Nice...
-
-
Legacy Member
A Low Number M1903. Mixed parts from WWII era. They are fairly common, but you have a nice one there.
-
-
Legacy Member
The black refinish color looks like some of the "Greek returns" that CMP
sold about 20 years ago. Like this rifle, one category was "low number Springfields" sold with a warning that they were not safe to shoot. Not a collector, not a shooter, it might bring the same as your other rifle.
There's no good reason to obscure the serial number of a gun, unless you have reason to believe that it is stolen.
Neal
-
-
Legacy Member
What's the third number of the serial number. It looks real close to being a high number. They use 800,000 as a high number just to be safe, but actually a serial number just under that is safe but no-one knows how much under the 800,000. Ray
-
-
Legacy Member
Looks like a WW2 B&S bolt, do you have the Hatcher hole on the left side ? The large SADAL is a rebuild stamp
-
-
FREE MEMBER
NO Posting or PM's Allowed

Originally Posted by
rayg
What's the third number of the serial number.
792XXX. Too bad about the safety issue with these. I would have liked to take it to the range.