-
Legacy Member
Interesting Gun Shop experience
Took a drive out to one of the shops that I frequent on a regular basis yesterday, looking for a No4 Mk1 bolt head (#2) to have as a spare. I knew this place had a box of No4 spares. The box comes out at the shop and I see all the prices clearly labelled. The majority of the heads were #1 LB and I also saw a No4 C/|\ rear milled sight. I said I'll take the #1 LB bolt head, LB extractor/screw and the rear milled. He immediately said "Oh I can't sell that to you for that price, I have to look these up". He comes back and increased the prices 100% and pulls the rear sight back. I said what do you want for the rear sight, I'll pay you the double for it. He said, "you can't have it". This has happened before in this store.
I am an enthusiast trying to get off the ground in todays market. Which means I do a tonne of looking to get a decent deal. If I see what I want, I pay for it though.
I get it! The availability and supply/demand dictates the price. To snatch a piece out of my hand literally after I spent time and money to get to that shop. Wow.
I have decided to never to step foot in there again. Feels like a bad break up!
Information
|
Warning: This is a relatively older thread This discussion is older than 360 days. Some information contained in it may no longer be current. |
|
Last edited by JerryEAL; 03-14-2015 at 10:47 AM.
-
Thank You to JerryEAL For This Useful Post:
-
03-14-2015 09:36 AM
# ADS
Friends and Sponsors
-
Legacy Member

Originally Posted by
JerryEAL
I have decided to never to step foot in there again.
I'd have voiced to him in no uncertain terms too. I wasn't blessed with that filter that says leave well enough alone.
-
-
-
Legacy Member
JerryEAL: There are some real jerks out there looking to cash in on the current boom in collecting. I've had good luck on the CGN Equipment Exchange and met some great guys at the same time. Often very reasonable prices and usually willing to dicker a bit. Even better solution is to find a local Lee Enfield armourer/ gunsmith who has the proper parts and the knowledge to help you out with true problems. The spare bolt-head, for example, is a good example. As explained by the resident experts on this forum you need a drawer with dozens or hundreds to properly find a replacement that gives good headspace plus correct overturn, etc, etc.
Ridolpho
-
The Following 2 Members Say Thank You to Ridolpho For This Useful Post:
-
Advisory Panel

Originally Posted by
JerryEAL
I have decided to never to step foot in there again.
I've had the same sort of incident and like Warpig I opened fire on the spot. I promised myself I'd never go back but here on the Island things are limited so...fortunately after a couple of years the offending people have moved on and if you wait the whole regime changes. In your case I can't say...
-
Thank You to browningautorifle For This Useful Post:
-
Legacy Member
I too would have strongly voiced my displeasure with the fellow in no uncertain terms by telling him to....................you get my drift
These people are best avoided at all costs, and you should return the favour by at least going out of your way to tell all and sundry that you can, to avoid giving the particular shop any business at all
-
Thank You to brnom2 For This Useful Post:
-
FREE MEMBER
NO Posting or PM's Allowed
You have my condolences because you both just lost a long-term relationship. You thought he was fair and found out he was foul. You saw him as reasonable, but he was just hungry for money. Let him fade into oblivion, but be sure to warn your buddies (as you have through this post.)
I triage my business world into three camps:
1) the Adversarial capitalists who are more interested in aggrandizing their wealth at my expense; use win-lose bargaining every time; and are ethically untrustworthy.
2) the Transactional capitalists for whom everything is a "deal;" their objective is to buy low and sell high; they operate within the law but care little about long-term business relationships.
3) the Collaborative capitalists that believe in old-fashioned values of trust, honor, fairness, and finding ways to create value long-term; every interaction is aimed at a "win-win" for both parties.
Over the years I've learned to run from (or fight if I have to) the Adversarialists, limit my buying from the Transactionalists to those with whom I must deal if I need low-price, and seek the wisdom and value of the Collaborative businesses that see a productive long-term relationship and that make quality products/services paramount.
While many lament the rarity of the trustworthy, long-term business relationships, there is a great deal of economic data that proves these types of businesses are healthy, innovative, and will produce competitive advantage year after year, when well run.
In the case of your gun shop, the proprietor might have said "Oops, these prices are 20 years old, and times have changed. The new fair market value is now higher. And I've had to carry the cost/risk of holding these for 2 decades. But I cherish our business over the years. Is there anything you'd like to swap for these on a value-to-value basis that might make this transaction fair for both of us?" (or something creative that keeps you both doing business in the future. )
There are many ways to be in business and make sure customers are satisfied when they leave. Few people know that a satisfied customer tells 4 people about their experience, but 20 people know about it when the customer leaves dissatisfied (these numbers have probably multiplied now that the internet has become a means of proliferating dissatisfaction, as your comments so well illustrate).
Last edited by Seaspriter; 03-14-2015 at 03:07 PM.
-
Legacy Member
A few years ago I was going to see family in Texas. I stopped into a shop in Alabama and a similar experience occurred. The posted prices were trebled and quadrupled when I asked (the shop was only 10 or so years old). The employee smiled and I was told "take it or leave it." I mentioned this to a friend who lived in the area and he went onto the shops website. Posted a remark that he'd never shop there due to their poor customer relations. He then called a few friends (maybe 4) who did the same. I later found out the shop cleaned house of its originally employees and was better.
I can't see what's wrong with posting the name of the establishment you had issues with. it might save someone else from having a bad experience and could affect change.
-
The Following 2 Members Say Thank You to FlightRN For This Useful Post:
-
FREE MEMBER
NO Posting or PM's Allowed
If there is a price labeled well that should be it, obviously an opportunist ******* worth avoiding.
-
FREE MEMBER
NO Posting or PM's Allowed
I don't think a price on a label should be written in stone.Some little shops have parts that they acquired many years ago.I came across one that the owner had passed and the new owner was sorting through the bits and pieces. Ross nose cap with a price of $1.75 on it. I knew what it was worth and so did he. My offer of $100.00 was turned down.
-
FREE MEMBER
NO Posting or PM's Allowed
This is why I travel close to 1600km once a year to buy from a dealer I respect. Been dealing with him for well over 20 years, always been looked after. I've never had to haggle or question a price and often walked out with a bag of freebies or other little gems just thrown in. Loads of advice has always been just a phone call away. For those in Australia
, I can very highly recommend Alan Hibbs at Kingaroy Firearms (not affiliated, but I believe that good service should be acknowledged).