Results 1 to 10 of 190

Thread: Win Mod12 Trench Gun Conversion

Click here to increase the font size Click here to reduce the font size

Threaded View

Madcap Win Mod12 Trench Gun... 02-04-2022, 09:17 PM
baltimoreed Built a M12 trench a few... 02-04-2022, 09:52 PM
Madcap Thank you for the reply. I'm... 02-05-2022, 01:30 PM
browningautorifle The blue is very nice for... 02-04-2022, 10:29 PM
Madcap 123749123748 I looked at... 02-05-2022, 02:04 PM
Tom Doniphon The Cutts was added later. ... 02-05-2022, 01:11 PM
Madcap Yes sir, I remember reading... 02-05-2022, 02:08 PM
Tom Doniphon If you use a Winchester USGI... 02-05-2022, 02:29 PM
Madcap Thanks Tom, I remember... 02-05-2022, 02:58 PM
Tom Doniphon It should be tapered... 02-05-2022, 05:22 PM
Madcap Had me cornfused there. OK,... 02-05-2022, 11:48 PM
Madcap Late Followup 02-11-2023, 10:59 AM
Madcap Photos of the rivets... 02-11-2023, 06:07 PM
rcathey I’ve been using a laser... 02-05-2022, 10:14 PM
Madcap That sounds very encouraging.... 02-06-2022, 01:39 AM
rcathey I think I could get that... 02-06-2022, 09:10 AM
Madcap That's very considerate. I... 02-06-2022, 02:15 PM
Madcap OK, sorry for the delay. I'm... 02-07-2022, 02:31 PM
baltimoreed 123768 If there is 20 inches... 02-05-2022, 11:22 PM
browningautorifle You had Tom Doniphon here,... 02-06-2022, 12:00 AM
Madcap The barrel has enough to cut... 02-06-2022, 02:09 AM
Surpmil Your instincts are good IMHO.... 02-06-2022, 01:58 PM
Madcap Based on what information is... 02-06-2022, 02:33 PM
Madcap DISASSEMBLY 02-09-2022, 08:06 PM
browningautorifle Looks like someone was at it... 02-09-2022, 09:29 PM
baltimoreed That’s weird the way it’s... 02-09-2022, 10:19 PM
Tom Doniphon "The slide sleeve cap... 02-10-2022, 05:32 PM
Madcap I'm leaning more to... 02-10-2022, 12:39 PM
rcathey If you’re interested in... 02-10-2022, 03:04 PM
Madcap I'd like to give a try but... 02-10-2022, 04:55 PM
rcathey Should be a learning... 02-10-2022, 05:25 PM
Madcap It looks like you appreciate... 02-10-2022, 07:44 PM
82Trooper is this the cap you need? ... 02-10-2022, 06:56 PM
Madcap Affirm - that's the one ... 02-15-2022, 12:20 PM
baltimoreed The military guns were made... 02-10-2022, 09:47 PM
Madcap It finally dawned me that I... 02-11-2022, 05:21 PM
baltimoreed I shortened my M12 trench... 02-11-2022, 06:27 PM
browningautorifle Seriously, I have a couple... 02-11-2022, 06:39 PM
Madcap Is the magazine spring and... 02-11-2022, 11:17 AM
Madcap New mag spring 02-11-2022, 01:39 PM
baltimoreed You only need enough extra... 02-14-2022, 04:52 PM
browningautorifle Agreed... 02-14-2022, 04:59 PM
Madcap M12 riot barrel 02-20-2022, 11:12 PM
baltimoreed I was always under the... 02-20-2022, 11:27 PM
Madcap Yes sir, I'm from what I've... 02-22-2022, 01:18 PM
Madcap Forearm replacement help 02-24-2022, 12:57 PM
browningautorifle To remove the wood from the... 02-24-2022, 01:07 PM
Madcap Hello Jim, .... removing the... 02-24-2022, 02:40 PM
browningautorifle If you mean the wood, yes it... 02-24-2022, 02:46 PM
Madcap OK, it's separated - but - I... 02-24-2022, 03:49 PM
browningautorifle Dress those back with a fine... 02-24-2022, 04:34 PM
Madcap I tried a small half round... 02-25-2022, 08:46 PM
Madcap Saved It! 02-25-2022, 10:58 PM
browningautorifle All 12 ga should fit. 02-25-2022, 11:23 PM
Madcap Great, thanks - 02-26-2022, 04:42 PM
baltimoreed My two rebuilds have 18... 02-26-2022, 05:33 PM
Madcap eBay has a few18 groove... 02-27-2022, 12:21 AM
Madcap The decision to finally cut... 03-01-2022, 11:10 AM
Madcap Heat Shiellds 03-01-2022, 03:41 PM
browningautorifle If you can find a tinsmith... 03-01-2022, 05:28 PM
rcathey How does it feel stiffness... 03-01-2022, 06:05 PM
browningautorifle If you come close to the... 03-01-2022, 06:36 PM
Madcap The thickness appears... 03-01-2022, 08:19 PM
Madcap double post 03-01-2022, 08:47 PM
Madcap East Taylor Bayonet Adapters 03-02-2022, 08:48 PM
Madcap Trench Gun Magazine Plug... 03-02-2022, 09:16 PM
Madcap Magazine Plug & Heat... 03-07-2022, 01:03 PM
baltimoreed I can’t tell you why there is... 03-07-2022, 02:47 PM
Madcap There are several other... 03-08-2022, 06:41 PM
baltimoreed 124763124764Heres a pix of my... 03-08-2022, 07:00 PM
Madcap Thanks for posting the... 03-08-2022, 09:52 PM
baltimoreed 124767 This is what a poster... 03-09-2022, 08:12 AM
Madcap Thanks for the info - looks... 03-09-2022, 12:13 PM
Tom Doniphon The swivel on my Model 12... 03-09-2022, 01:14 PM
Madcap Rear Swivel 03-09-2022, 01:39 PM
Madcap Thank you Tom - I'm not sure... 03-09-2022, 02:57 PM
Madcap Rear Swivel 03-17-2022, 12:21 AM
Madcap Flat Heat Shield Prototypes 03-17-2022, 01:03 AM
ssgross Why not form it yourself?... 03-17-2022, 07:18 AM
Madcap Thanks very much for the... 03-18-2022, 05:14 PM
Madcap Comparisons 03-18-2022, 05:54 PM
Madcap New Forend 03-18-2022, 10:21 PM
ssgross That is why I suggested... 03-19-2022, 03:52 PM
browningautorifle Looks good now. 03-19-2022, 05:56 AM
Madcap I've been trying to find a... 03-19-2022, 01:24 PM
Madcap The advice on the above... 03-20-2022, 01:47 PM
browningautorifle Yes, I had one here and if... 03-20-2022, 02:16 PM
Madcap According to the East Taylor... 03-20-2022, 07:23 PM
Madcap I couldn't remember what east... 04-10-2022, 11:06 AM
browningautorifle That's a website warning from... 04-10-2022, 11:08 AM
Madcap My buddy originally had an... 03-20-2022, 06:14 PM
ssgross how does your bayonet adapter... 03-20-2022, 07:24 PM
Madcap My original adapter fits... 03-20-2022, 07:34 PM
Madcap Briefly checking in - nothing... 03-28-2022, 01:41 PM
Madcap Yesterday I consulted with a... 04-01-2022, 01:11 AM
ssgross Did you say you also placed... 04-01-2022, 06:42 PM
Madcap Prior to my orders East... 04-08-2022, 04:17 PM
Madcap I received it on another... 04-10-2022, 03:55 PM
ssgross he let his certificate... 04-10-2022, 04:27 PM
Madcap Ahh, OK, I thought that might... 04-11-2022, 09:36 AM
ssgross hopefully if I call on the... 04-11-2022, 02:36 PM
Madcap Let me know if he answers the... 04-17-2022, 05:38 PM
ssgross LOL...you sound like you've... 04-17-2022, 05:53 PM
Madcap His website is back up - I... 04-21-2022, 06:16 PM
Madcap Flat Heat Shield Prototype 04-23-2022, 01:57 AM
rcathey That really doesn’t look... 04-23-2022, 07:37 AM
Madcap Yes sir, and thanks to folks... 04-23-2022, 02:03 PM
ssgross well done. I knew you would... 04-23-2022, 02:03 PM
Madcap Does anyone know what type ... 04-23-2022, 02:59 PM
browningautorifle For all the world, I thought... 04-23-2022, 05:49 PM
Madcap You may be correct. I thought... 04-23-2022, 06:39 PM
Madcap After studying a few original... 08-21-2022, 03:05 PM
rcathey The drawing’s done and filed.... 04-24-2022, 07:50 AM
Madcap Really only thanks to your... 04-24-2022, 01:46 PM
Madcap Only thanks to your interest... 04-24-2022, 02:03 PM
Madcap Heat Shield Added Details 04-24-2022, 02:59 AM
Madcap Heat Shield Prototype No. II 05-05-2022, 06:08 PM
browningautorifle That might do it... 05-05-2022, 06:27 PM
Madcap Just a brief update on the... 05-19-2022, 04:37 PM
Madcap No opportunity to get back to... 06-10-2022, 10:06 AM
Madcap Beware "Parts for Antique... 08-03-2022, 03:27 PM
browningautorifle Sad, I was one that... 08-03-2022, 03:57 PM
Madcap The photos don't actually... 08-03-2022, 10:09 PM
browningautorifle Probably best then, hope the... 08-03-2022, 11:19 PM
Madcap I emailed him yesterday... 08-04-2022, 12:21 PM
Surpmil Sadly, more and more common;... 08-06-2022, 03:48 PM
ssgross my 97 adapter and heat shield... 08-05-2022, 10:56 AM
baltimoreed Sorry your mount was bad. My... 08-05-2022, 10:21 PM
Madcap I admit to being critical and... 08-06-2022, 03:09 PM
Madcap I never could have expected... 08-08-2022, 11:56 AM
Madcap I finally got out to work on... 08-13-2022, 10:25 PM
rcathey Does it feel stiff/sturdy... 08-14-2022, 10:24 AM
Madcap Hello rc - yes, It appears... 08-17-2022, 12:11 PM
ssgross just thinking out loud - you... 08-17-2022, 02:14 PM
browningautorifle And appears to have been... 08-17-2022, 10:55 PM
ssgross Some good pictures of what is... 08-22-2022, 08:03 AM
Tom Doniphon Winchester did rivet the heat... 08-22-2022, 12:32 PM
ssgross Click the "Go Advanced"... 08-22-2022, 12:37 PM
browningautorifle I can do it for you Tom, we'd... 08-22-2022, 02:56 PM
Madcap Thanks Tom, I was pretty sure... 08-23-2022, 10:56 AM
browningautorifle So, here's what I've... 08-22-2022, 05:25 PM
ssgross Fascinating. Thanks Tom! (and... 08-23-2022, 08:58 AM
browningautorifle And trying to make sense of... 08-23-2022, 10:28 AM
Tom Doniphon The photos Jim posted for me... 08-23-2022, 01:02 PM
Madcap I took my original adapter... 08-25-2022, 02:15 AM
browningautorifle The sporting barrels are... 08-25-2022, 08:35 AM
Tom Doniphon Actually, on the Model 12,... 08-25-2022, 12:47 PM
browningautorifle Why would they? This ain't... 08-25-2022, 05:34 PM
ssgross Look on Ebay. There is a guy... 08-25-2022, 10:06 AM
Madcap I took my original adapter... 08-25-2022, 02:04 PM
Madcap Only reason I asked about the... 08-25-2022, 09:58 PM
Madcap After studying the original... 08-25-2022, 10:39 PM
ssgross That photo above the left... 08-28-2022, 12:41 PM
Madcap Photos of the inside of the ... 08-29-2022, 08:21 PM
ssgross those look to have a chamfer... 08-30-2022, 08:28 AM
Madcap I'll need to study what... 08-31-2022, 01:14 PM
Madcap The rivets are here but may... 09-01-2022, 06:19 PM
Madcap edit to prev post:... 09-01-2022, 08:08 PM
browningautorifle They look good. After trim... 02-11-2023, 06:49 PM
Madcap Thank you Jim...after this... 02-13-2023, 10:44 AM
ssgross In case you didn't see in... 02-13-2023, 11:20 AM
Madcap No, I wasn't aware...thank... 02-19-2023, 08:48 PM
Madcap Depending on availability of... 02-19-2023, 09:02 PM
Madcap I didn't have the chance to... 03-23-2023, 04:55 PM
Madcap Follow up on the above post:... 02-20-2023, 08:58 PM
Tom Doniphon Winchester used special... 03-23-2023, 05:17 PM
Madcap Tom, You are no doubt... 03-31-2023, 05:56 PM
Madcap Hello all - My project... 05-11-2023, 03:19 PM
browningautorifle Looking forward... 05-11-2023, 09:15 PM
Madcap Competed Conversion 05-16-2023, 05:08 PM
browningautorifle It looks good...the sling, I... 05-16-2023, 07:13 PM
Madcap Thanks Jim, I sorta wish I... 05-17-2023, 12:13 PM
browningautorifle Maybe... 05-17-2023, 04:55 PM
Madcap Not a priority at the moment... 05-18-2023, 09:21 AM
RAM1ALASKA Congratulations on your... 05-19-2023, 10:53 AM
Madcap Much thanks RAM1ALASKA...I'm... 05-23-2023, 12:22 AM
Madcap What are the thoughts on a... 05-23-2023, 11:43 AM
Madcap "What are the thoughts on a... 05-23-2023, 06:45 PM
browningautorifle Like I said, I had a repro... 05-23-2023, 09:01 PM
Madcap It looks like the canvas... 05-24-2023, 12:27 PM
Surpmil The rest of the story, or... 05-26-2023, 12:49 AM
Madcap Appreciate the added... 05-30-2023, 06:09 PM
  1. 03-07-2022 01:03 PM #11
    Madcap is offline
    Legacy Member Madcap's Avatar
    Join Date
    Jan 2022
    Last On
    08-28-2024 @ 06:11 PM
    Location
    Hill Country, TX USA
    Posts
    197
    Real Name
    Dick
    Local Date
    05-23-2025
    Local Time
    08:51 PM
    Thread Starter

    Magazine Plug & Heat Shield

    I'm also very confused what the hole next to the stud is for.... anybody?
    Dick
    Last edited by Madcap; 03-07-2022 at 01:10 PM.
    Top   Send PMPM  Reply With Quote Register To Reply
« Previous Thread | Next Thread »

Similar Threads

  1. 1897 trench conversion
    By M1 C FAN in forum Military Shotguns
    Replies: 13
    Last Post: 11-05-2019, 01:23 PM
  2. US Model 1917 .22 LR conversion third type-- Parker Hale conversion
    By breakeyp in forum Pattern 1913/1914 and M1917 Rifles
    Replies: 6
    Last Post: 02-24-2018, 06:50 PM
  3. Lithgow Mod12 Restoration
    By BushyFromOz in forum The Restorer's Corner
    Replies: 3
    Last Post: 12-07-2016, 08:05 PM
  4. m97 trench
    By carl-d in forum Military Shotguns
    Replies: 6
    Last Post: 04-30-2013, 02:41 PM
  5. M97 Trench on G.B.
    By TrenchCrazy in forum Military Shotguns
    Replies: 9
    Last Post: 06-23-2009, 10:30 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules & Site User Agreement

All times are GMT -4. The time now is 09:51 PM.
Powered by vBulletin™
Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.
Username Changing provided by Username Change (Free) - vBulletin Mods & Addons Copyright © 2025 DragonByte Technologies Ltd.
Thread / Post Bookmarks provided by Thread / Post Bookmarking (Free) - vBulletin Mods & Addons Copyright © 2025 DragonByte Technologies Ltd.
Copyright ©2006 - 2024 by MILSURPS.COM - All Rights Reserved
Your IP Address: 18.216.199.48  |  OS: unknown  |  Browser: Mozilla 5.0
Loading...
Milsurps Voice Mail