-
Legacy Member
https://www.milsurps.com/images/impo...87a019c9-1.jpg
Armourers Note: The Gas Regulator SHOULD be set at the SECOND hole from the Smallest!....................
-
-
02-01-2015 03:40 AM
# ADS
Friends and Sponsors
-
FREE MEMBER
NO Posting or PM's Allowed
Originally Posted by
stencollector
The gun is one of the
Canadian cut-ups rewelded. The lower may be a replacement...the photos don't show the detail back of the pistol grip. You also don't see the typical burn marks on the pistol grip. But you can see where the contours are lost just under the barrel nut. Shame whoever did it did not invest in a couple small grinding wheels to return most of the profile. What is impressive is that the bluing or park went on fairly evenly over the welded up area. Usually, due to the hardening of the welded area, or the different metal used in the weld, the repaired area reacts differently to the chemicals.
As mentioned already, you need the butt strap, and for originality could replace the front bipod with the extendable leg type.
Hopefully you have better self control than I did. Brens seem to be almost as addictive as Enfields.....you usually can't stop at just one.
Hi thanks, the bluing took a few applications but I figured out the best recipe. I use simple extra strength simple green as my degreasing agent. As you know oxpho blu is the only way to go for bluing all else I've tried bleed off or are not consistent in there application.
To get a consistant look to bluing with this stuff I had to use a heat gun on the metal before every application. You'll know its hot enough that you get a little steam during application and the metal just sucks in all the bluing solution evenly without a variance in colour due to multiple metal types. I then degreased it again after letting it sit for a while, then repeated the process/application about 4/5 times until it was just right.
The metal work was all done mostly by hand with files, then with a Dremel and a wire brush or a drill. I seem to have a good eye for filing stuff like this I guess after doing it so many times. Basically it's filing, touching, then looking, filing then touching over and over again.
Oh Ya and I suffer from really bad OCD and it helps greatly with stuff like this. You allways get my best work whether I like it or not lol.
If anyone needs some work done let me know at cirving5322@rogers.com and if I can't do one for you I can at least walk you through it so you can do it yourself.
---------- Post added at 12:13 AM ---------- Previous post was at 12:07 AM ----------
Originally Posted by
flying pig
Brit Plumber, I believe it was one of the ones Mr. Clark did. Very nicely done, and glad to have it here.
Yup that's one of my restorations. He was so happy with the work he even gave me more than I asked for it. I was really surprised to see him sell it.
-
-
Contributing Member
I was very pleasantly surprised as well. In the end we both walked away happy though. I wanted a Bren so bad. Ha ha. It still hasn't spent more than a day in the gun room without being fondled. Guess we'll see how durable that oxpho blu really is!
-