mildew and mold on gunstock

[Peter Laidler]

What about putting it in the freezer? That seems to kill everything

Information

Warning: This is a relatively older thread This discussion is older than 360 days. Some information contained in it may no longer be current.

[Aragorn243]

The problem with mold is that it may simply go dormant rather than die in either extreme of hot and cold. The same can happen drying it out. It can't grow or reproduce but go out in the rain and forget about it when you come home and you could have a new outbreak. Better to find something that kills it outright. I've had two stocks that had mold, the first was unsalvageable and was on the Swedish M38 I brought back from the dead a few years ago. The second was on the No 4 that I got with the Swede. I used a combination of citristrip and wood bleach to kill it and remove the stains. This was a drastic cleaning and removes all of the original finish and may not be necessary on your friends rifle. No 4 looks great today after numerous coats of BLO. Swedish stock I didn't really mess with much. Snapped in half about 5 inches from the end due to combination of the mold and dry rot. I cut the worst off and kept the shortened stock for I have no idea what reason other than reluctance to throw anything away. I could never get all the stains out of that one.

[Seaspriter]

A year ago I visited a friend in eastern Pennsylvania whose farm had been hit hard by "Super-Storm Sandy" several years ago. He lost dozens of trees, which were cut down and split into piles of firewood. These logs had been sitting out in the weather for at least two years, totally exposed to all the elements.

Knowing he had some walnut trees on his property from former visits (as well as maples and birch, and beech), I asked if I could prowl through his wood pile and see if I could scrounge any walnut for repairs to my gun collection.

All the hardwoods had serious signs of severe rot and fungus invasion -- except for the walnut. It was all in perfect condition, just like it had been sitting covered and kiln dried.

Why? apparently walnut (at least the American Black Walnut version -- not sure about the English version) has a fungicide called juglone along with a form of organic iodine that kills parasites and fungal rot. I suppose this is one reason why walnut has been a favored wood for gun stocks for so many years.

[CINDERS]

I am with you Aarogorn never throw stuff out 'cause the next day you will require it, my wife fails to share that view!

[CINDERS]

Its just what one of the things that happened to a shooter I know

[Aragorn243]

I've tried the stock in the oven before with a SMLE NoIII because it would actually fit. I did not have an issue with anything happening to the stock but the house stunk for a week so I did not repeat the experiment. I prefer putting them on the dashboard of my truck in the sun. Never saw anything work better than that. I have also put them beside heaters, on top of heaters (watching constantly) for short periods of time with good success. I would never put them anywhere near a heat source that I could not watch and control. Just watch the oil ooze out, wipe it off and repeat in a few minutes. I did this with Nagant stocks, not sure I would do it with anything of serious value.

[CINDERS]

Did you have sides and gravy with that Mk III fore stock Aarogorn if so I hope it was not too tough......

[Aragorn243]

I could never figure out how guys are putting them in the ovens to begin with unless the door is wide open and in the summer, that's going to heat the whole place up. No full length stock is going in there. My wife was not happy about the smell. In my truck it didn't matter, she was rarely in the truck and I didn't mind it. That was 25 years ago. I've evolved my cleaning techniques considerably since then.

[Bruce_in_Oz]

A cloth moistened with vinegar will do for starters. Avoid the metalwork.

If you live somewhere that sunlight is abundant, a little time in the great outdoors will help as well. Moulds, like Vampires, tend to have an aversion to Ultra-Violet light. Slip into your local "instant suntan" centre and spirit the afflicted rifle into the UV body-tanning tank?

You should also look at "decontaminating" wherever it is you store your prized goodies. If there are spores in the safe / strong-room / old wardrobe, your nice, recently cleaned rifles will simply get reinfected once "back in their box".

[madrad62]

i tried the obviovs,anti fvngal foot spray.it worked,sprayed on one day,wiped off the next.repeat as nessisary.ive treated several milsrps and commercial stocks.i inherited a few that were left vnatended for several years and were covered in mold,some deep enovgh to pit throvgh hard commercial finish.all have stopped molding.treatment was done a few years ago.i did completely dissasemble them and fovnd mvch inside.it worked for me.