I need some help with my remington03A3

[redrumtc]

there are no welds trust me on that I broke it down

ok.
heres the pics i need.
close up of the left side were the switch says on and off.
if you know how, remove the rifles from the stocks, and take a picture of were the barrel meets the reciever, top and bottom.
a pic from the breach, and the muzzle.
and one of the bolt face..
the plastic stock are made for drill use only, and not to be shot with.

[redrumtc]

the guy i got them from works in the arms room on base no welds but the tips

[Chuckindenver]

not that i doubt you however..
military specs to modify for drill use.
weld a plug in the breach, usually a 3 inch steel rod,
cut a section of the chamber with a torch, to weld said rod into the breach.
weld the barrel to the reciever, usually a 1 inch weld on the bottom side.
grind the firing pin tip off, weld the striker hole at the bolt face,
install the bolt, weld accross the cutoff down, so the bolt cant be removed.
remove the front sight blade or grind it off.
the few hundred or so i delt with were done this way, some more then others, some much less.
i need to know these things if you want them made into shooters.

[Chuckindenver]

in any event, i have barrels available, and likely most of the parts needed to get the job done, depending on how much money you want to spend, or maybe a part trade..
best bet is to contact me direct.

[redrumtc]

yes contact you # plz

in any event, i have barrels available, and likely most of the parts needed to get the job done, depending on how much money you want to spend, or maybe a part trade..
best bet is to contact me direct.

[Calif-Steve]

The guy that got them works on base??? Ouch. Any questions about their legality?

[Chuckindenver]

we talked last night..
ill keep everyone posted..
sounds like some rifles returned to be scrapped, and dug from the scrap pile.
i guess ill find out.

[Doug Rammel]

When I look at your pics on photobucket I get a malicious attack warning. You may want to check your PC for a virus. I only get it on your pics.

FWIW

[Calif-Steve]

Removal of weapons from scrap pile sounds like theft. Anybody hear about the guys at Lake City who were selling bullet jackets by the truck load? Make sure you are OK with these toys. Last time I heard all '03's and Garands were being turned over to CMP for ultimate disposition.

[Griff Murphey]

Plastic stocks mean they are ex-ROTC rifles probably in use within the last 20 years.