-
FREE MEMBER
NO Posting or PM's Allowed
don't laugh home made brass catcher
-
06-19-2017 10:47 PM
# ADS
Friends and Sponsors
-
Legacy Member
Change your extractor and ejector and alter the ejection pattern to being behind you.
-
Thank You to bobg For This Useful Post:
-
-
-
The Following 3 Members Say Thank You to JimF4M1s (Deceased) For This Useful Post:
-
Advisory Panel
Why not pick up one of these brass deflectors
They look more GI too...the others only if you're in Panama...
-
The Following 2 Members Say Thank You to browningautorifle For This Useful Post:
-
Mosquito netting or grab a large smelt net.
I gonna grin also, but what ever it takes to get your brass !
I leave a hard 2 rifle case open behind me on a table @ our range, it will catch 90% of the spent brass.
Ejects over my right shoulder. Sometimes I sent my straw hat there and can catch nearly 50 %.
Out in the grass or gravel I'll unfold a 6x8' tarp.
Like I said what ever it takes.
But like Bobg said a new ejector and extractor should have you good to go.
Might not need the Extractor if there are burrs under the lip you can lightly file.
Gotta give you credit.......... Anyone that shows up with that set up....... NEEDS HIS BRASS BACK.... and must be SERIOUS !!!!
Like those Go Fund Me Sites......... We could start up a Brass collections for you if need be.
All in good fun, Thx for the giggles ;-)
CH-P777
P.S. Could we Sticky that picture. Pictures on the internet are there FOREVER
Last edited by painter777; 06-20-2017 at 12:26 AM.
Reason: add p.s.
-
The Following 2 Members Say Thank You to painter777 For This Useful Post:
-
-
-
What about one of those pop up screen houses?
Just cut out a small sighting/shooting hole and you'll be up to your knees in brass in no time.
Cheers
CH-P777
P.S. Being serious..... I had one of my shooters that was throwing brass hard out at 3'0'clock. Just enough to cover the bench top of the shooter to the right of me. You might know the type... All Pro shooter gear clothes, gloves, etc. I had a section of replacement screen left over from re-screening our patio door in the truck. I grabbed it, stood on the bench and stapled it up between us. Just as I finished up.... he packed up and left, but I left it up and worked great. When finished for the day I rolled the bottom up and tacked it out of the way. It was around and used by others there for a long time. Any locals know the CCRC and seen it, that was me !
Last edited by painter777; 06-20-2017 at 02:14 AM.
Reason: add p.s.
-
Thank You to painter777 For This Useful Post:
-
Contributing Member
Yep painter I know the type they have all the go gear that looks a million bucks the gun even has its own blanket for cold days they get all upset if they get a 4 and go about cussing the reloading press was out or the bullet maker cannot make bullets. Then I rock up with a beater get 3's, 4's & 5's have a good time then head for home full of sunshine whilst they go home in a huff with black clouds over their head........
-
-
Contributing Member
I seen a guy at the Range do this to recover his casings and he modified a oversized Aquarium Fish Net on rigged up sometime to hook onto the Wire around the Fish Net. The only thing he mentioned was he has to change them out after a few times, but it was worth it to recover his casings. I never thought I see another like it.
-
-
Legacy Member
Guys at my range are modifying those net bags for carrying your dirty laundry and some 1/2 PVC. It's all the rage up at the pistol range. Bet this one here works better then the POS UTG I have strapped to my AR.
-