-
FREE MEMBER
NO Posting or PM's Allowed
1ST 1903 A3 and need parts.
I just got my first 1903 A3
. I need to find a front sight blade and pin. The barrle is marked 4-43. I seen that there is diff sizes and dont know what to get. Thank your for helping and taking time to read this.
Information
|
Warning: This is a relatively older thread This discussion is older than 360 days. Some information contained in it may no longer be current. |
|
-
02-13-2011 08:54 PM
# ADS
Friends and Sponsors
-
Welcome to the forum!
Their heights are marked alphabetically, with the highest being an 'A', and I don't know how far down they go to. ('E', 'F'.... ?)
I was going through my parts yesterday and saw a new 'C' blade and pin still in the wrapper. You can have it to get you running if you want it. Just send me a PM with an address and I'll mail it out.
~ Harlan
-
-
-
Legacy Member
A size "C" is common. You might try - Bill Ricca's Home Page Contact him.
http://www.ssporters.com/index.html Contact them.
Some others might have more ideas. Welcome to the forum!
-
-
Legacy Member
Make sure you get the GI pin with the blade. Those tiny pins are tough to find.
-
-
FREE MEMBER
NO Posting or PM's Allowed
I was wondering what happened to the original sight. This isn't a restored drill rifle is it?
-
FREE MEMBER
NO Posting or PM's Allowed
How would I know if it was a restored drill rifle?
-
Legacy Member
Could you post a photo of the cut-off?
-
-
FREE MEMBER
NO Posting or PM's Allowed
Last edited by Stone7Romeo; 02-16-2011 at 10:40 PM.
-
FREE MEMBER
NO Posting or PM's Allowed
Here are the pics. I really hope this is not a drill rifle. I want to take this our on a hunt next weekend.
-
Legacy Member
-