-
FREE MEMBER
NO Posting or PM's Allowed
Rcbs neck vs. full length sizer #?
I have a RCBS 30-06 sizer die, but don't know of it is a neck sizer or full-length sizer. It's labelled
"RCBS 30-06SB.....6"
Information
|
Warning: This is a relatively older thread This discussion is older than 360 days. Some information contained in it may no longer be current. |
|
-
10-16-2012 03:18 PM
# ADS
Friends and Sponsors
-
Legacy Member
Small Base. Its a full length die.
-
The Following 2 Members Say Thank You to Calif-Steve For This Useful Post:
-
-
FREE MEMBER
NO Posting or PM's Allowed
-
FREE MEMBER
NO Posting or PM's Allowed
Some of the semi-auto rifles like the 742 Remington had tight chambers, and standard dies wouldn't always pull the case down enough for proper chambering. If you are full length sizing you might note how much expansion you are getting at the base with cases resized in the SB die.
-
Legacy Member
The RCBS .30-06 SB[small base], part #14803 full length die set. Sizes to .002" smaller than minimum standard size. Will work in all semi-auto rifles.
-