+ Reply to Thread
Results 1 to 10 of 10

Thread: help with carcano markings

Click here to increase the font size Click here to reduce the font size
  1. #1
    Legacy Member Squirrelsquad's Avatar
    Join Date
    Dec 2020
    Last On
    01-30-2021 @ 01:10 AM
    Location
    Springfield, MO
    Posts
    1
    Local Date
    10-31-2024
    Local Time
    05:29 PM

    help with carcano markings

    i recently picked up what i believe is a carcano 91/24 TS. i've had some luck with identifying marks but there's still some i can't find information on(how hard is it to hold a punch straight?)
    i'm mainly looking for the underbarrel marks and anything wrong with what i have so far. i'd appreciate any information on this.

    what i've found so far: carcano 91/24 TS Terni made in '17 reworked in '25. 6.5x52 carcano, appears to have been reworked once, 1st revision? maybe 2nd
    only legible markings i can find on the stock is the SN which matches the receiver. import markings from PW arms in Redmond.
    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.

  2. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Location
    Milsurps.Com
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  3. #2
    Contributing Member Aragorn243's Avatar
    Join Date
    Apr 2009
    Last On
    Today @ 04:29 PM
    Location
    Pennsylvania, United States
    Posts
    7,276
    Real Name
    Steve
    Local Date
    10-31-2024
    Local Time
    07:29 PM
    The SG is an inspectors stamp, the crossed rifles are generally accepted to mean the rifle is a bit more accurate than the average but this is not definitive, The third mark I believe is a 2/3's struck Savoy crest but as the top is missing, kind of hard to tell for sure. The rest are just various inspectors marks that meant something to them but the meaning to us is lost. The Z is possibly interesting but as it looks to be lacking an A and an F on each side of it, probably just an inspectors mark. AZF indicates captured by Austriaicon, usually returned after the war. Pretty sure that isn't what this one is.

  4. Avoid Ads - Become a Contributing Member - Click HERE
  5. #3
    Contributing Member Ovidio's Avatar
    Join Date
    Dec 2016
    Last On
    Today @ 08:42 AM
    Location
    Pordenone, Italy
    Posts
    2,250
    Real Name
    Ovidio Gentiloni
    Local Date
    11-01-2024
    Local Time
    12:29 AM
    Correct
    34a cp., btg. Susa, 3° rgt. Alpini

  6. #4
    Legacy Member bob q's Avatar
    Join Date
    Sep 2014
    Last On
    Today @ 05:10 PM
    Location
    north texas
    Posts
    478
    Local Date
    10-31-2024
    Local Time
    06:29 PM
    The crossed rifles have nothing to do with accuracy , it means the rifle received a total inspection when built . It was done every now and then during production , or if something changed .

  7. #5
    Advisory Panel Patrick Chadwick's Avatar
    Join Date
    Sep 2008
    Last On
    06-25-2023 @ 06:36 AM
    Location
    Germany
    Posts
    5,032
    Local Date
    11-01-2024
    Local Time
    01:29 AM
    Do I see a ROCCA ON THE COCKING-PIECE? - if so, then it is a subcontractor's stamp from WWII. Could be a replacement part.
    If it's ROSCA, I haven't a clue!
    Last edited by Patrick Chadwick; 12-26-2020 at 05:36 PM.

  8. #6
    Legacy Member tommylotto's Avatar
    Join Date
    Jul 2020
    Last On
    09-21-2021 @ 06:44 PM
    Location
    California
    Posts
    6
    Local Date
    10-31-2024
    Local Time
    04:29 PM
    Last edited by tommylotto; 12-28-2020 at 08:56 PM.

  9. The Following 4 Members Say Thank You to tommylotto For This Useful Post:


  10. #7
    Legacy Member Sherlock913's Avatar
    Join Date
    Jun 2021
    Last On
    08-13-2021 @ 11:54 AM
    Location
    Kansas
    Posts
    6
    Real Name
    Michael
    Local Date
    10-31-2024
    Local Time
    06:29 PM
    Looks like a 91/24 to me with that long rear sight base, and the 17 on the receiver where the year of manufacture normally is - I would assume it's a 1917 build.

    Terni rifles built in 1917 ran from serial #DF643 to TN9794.
    Last edited by Sherlock913; 06-27-2021 at 04:43 PM.

  11. #8
    Legacy Member RR17's Avatar
    Join Date
    Apr 2021
    Last On
    03-13-2022 @ 08:48 PM
    Location
    Colorado
    Posts
    6
    Local Date
    10-31-2024
    Local Time
    06:29 PM
    Mostly for my own entertainment and education, I decided to examine the markings picture by picture and note my observations. Take my notes as somewhat educated speculation and not the definitive word on anything.

    Picture 1 - The 6 over 16 is in a place that is often used for the month and year of manufacture. In this case, I would think June of 1916, except the date on top is 1917, and the serial number places somewhere in the middle of 1917 too. Maybe just unknown machine codes.

    Picture 2 - The “FARE” in the oval marking stands for Fabrica Armi Regio Esarmy. The 25 is the year the rifle was converted to the 91/24 at the Terni arsenal. The “17” is the original long rifle production year. The asterisk indicates excessive wear which led to the barrel being reworked.

    Picture 3 - various machining markings that were meaningful at the time, but lost to history.

    Picture 4 - “SG” is likely an inspector mark for Sergio Galasi. Crossed rifles indicate that the rifle was test fired and met performance standards, not necessarily any more accurate than any other. Estimates are that approximately 10% were tested. The 3rd mark looks like the Savoy Crest. The “FP” on the other barrel facet is the steel supplier code. In this case, Ferriere Piemontesi.

    Picture 5 - ROCCA is a fairly common small parts manufacturer. They also made bayonets.

    Picture 6 - The apparent “2” could mean this was a headspace correction bolt. They may have ranged from 1-5 with the precise measurements unknown.

    Picture 7 - My guess, based on the shape, is this was a Terni stamp with a crown above the letters “TNI” inside a circle.

    Picture 8 - “LZ” is likely an inspector mark.

    Picture 9 - I can’t make out the detail of the stock cartouche, but the general shape would lead me to believe it once read “Fabbrica D’Armi R.E. Terni Transformazione” with a year date of repair.

  12. The Following 2 Members Say Thank You to RR17 For This Useful Post:


  13. #9
    Legacy Member RR17's Avatar
    Join Date
    Apr 2021
    Last On
    03-13-2022 @ 08:48 PM
    Location
    Colorado
    Posts
    6
    Local Date
    10-31-2024
    Local Time
    06:29 PM
    Quote Originally Posted by RR17 View Post

    Picture 2 - The “FARE” in the oval marking stands for Fabrica Armi Regio Esarmy.
    I can’t figure out how to edit my post to fix my auto correct mistakes, but FARE stands for Fabbrica d’Armi Regio Esercito, or Royal Army Arms Factory.

  14. #10
    AlexRod85
    Guest AlexRod85's Avatar
    Hmm That's Great.

+ Reply to Thread

Similar Threads

  1. Mystery Carcano w/ Luftwaffe Markings
    By Clone3632 in forum Appraisals, Fakery, Dispute Resolution & Mediation Forum
    Replies: 2
    Last Post: 04-21-2020, 10:24 AM
  2. Carcano markings
    By yumastepside in forum Italian Rifles
    Replies: 4
    Last Post: 09-28-2018, 08:04 PM
  3. My first Carcano
    By Norway_Krag in forum Italian Rifles
    Replies: 7
    Last Post: 05-29-2015, 12:48 AM
  4. Carcano Rifle Markings
    By shubie416 in forum Italian Rifles
    Replies: 6
    Last Post: 06-24-2014, 08:17 AM
  5. 6.5 carcano
    By bvillars in forum Ammunition and Reloading for Old Milsurps
    Replies: 29
    Last Post: 11-27-2010, 07:04 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts