-
FREE MEMBER
NO Posting or PM's Allowed
scope mount on a M1917
I got an T stamped Winchester M1917 without scope and scopemount. Is it possible to use the P 14 scopemount or is there an extra one for the M 1917?
Thank you in advance
Gunner
Information
|
Warning: This is a relatively older thread This discussion is older than 360 days. Some information contained in it may no longer be current. |
|
-
05-25-2009 12:09 PM
# ADS
Friends and Sponsors
-
Originally Posted by
gunner
I got an T stamped Winchester M1917 without scope and scopemount. Is it possible to use the P 14 scopemount or is there an extra one for the M 1917?
Thank you in advance
Gunner
There were at least two different types of P14 scope mount. I would expect both are pretty hard to find separate from a rifle.
Can you post pictures of what you have?
Regards,
Jim
-
-
-
Originally Posted by
JGaynor
There were at least two different types of P14 scope mount. I would expect both are pretty hard to find separate from a rifle.
Can you post pictures of what you have?
Regards,
Jim
After i made the previous post i noticed your earlier post with the pictures.
FWIW I had two P14 snipers and neither of them was marked with a "T".
I know the "T" nomenclature came into use in WW2 with the No. 4 snipers But i don't see anything indicating it was actually used on rifles any earlier.
Regards,
jim
-
-
FREE MEMBER
NO Posting or PM's Allowed
Hello Jim,
Thank you for the answer. I know that the rifle was in use at the canadian army in WW2. So eventually they stamped the T. The rifle is strikingly accurate. I am able to shoot groups with 5 ore more shots under 1.5 " at 100m. And that with ironsight. So i think that`s a good idea to mount a scope.
But because of the rifles history it should be an original part. Have you the possibility to send a detailed Pic of a P14 scope mount ?
Thanks a lot.
Gunner
-
Originally Posted by
gunner
Hello Jim,
Thank you for the answer. I know that the rifle was in use at the canadian army in WW2. So eventually they stamped the T. The rifle is strikingly accurate. I am able to shoot groups with 5 ore more shots under 1.5 " at 100m. And that with ironsight. So i think that`s a good idea to mount a scope.
But because of the rifles history it should be an original part. Have you the possibility to send a detailed Pic of a P14 scope mount ?
Thanks a lot.
Gunner
Gunner Here are some pictures. They are from the main part of this site which has a lot of very good stuff on it.
This first one uses a BSA Scope M1918 manufactured for rifles issued to the Irish Free State in the 30's. Virtually identical Scopes and mounts were manufactured by the Periscopic Prism Company and used from WW1 until the beginning of WW2. There are pics of the PPC scopes and mounts in the site but the pics of the BSA are better.
No.3 MkI* (T) Rifle (BSA Scope) - (Pattern 1914 Mk1* W (T) Sniper Rifle) - Military Surplus Collectors Forums
This Is the Rifle No. 3 (T) (A). It was introduced mush later and has a lower mounted scope. Notice how th rear sight ihas been modified.
No.3 MkI* (T)A Sniper Rifle - (Pattern 1914 Mk1* W (T)A Sniper Rifle) - Military Surplus Collectors Forums
If I were you I would contact the site Adminsistrator (Badger) and see if he can shed any light on the meaning of the "T" on the receiver.
Possibly it means the rifle was accurate enough for telescope use or maybe it means something altogether different.
PS. Under no circumstances would I fire one of these rifles with an 80 or 90 year old scope on it. The internal lenses are fragile, can disitegrate and are all but impossible to replace.
Regards,
Jim
Last edited by JGaynor; 05-26-2009 at 07:06 PM.
Reason: typo
-
-
FREE MEMBER
NO Posting or PM's Allowed
Hi Jim,
Thank you for the images and for the idea with Badger. I remember that there was an other scopemount wich left the original ironsights in complete function. For some scopes you can have a good service from manufacters. So i use a LE with an scope from Kahles ( i know that fitts not so good german/english) from 1945 and they restored the scope complete for 300 euros.
Best regards
Gunner
-
P14 w/ Warner Swazey Scope
I found this picture on a Spanish Website. It appears to date from WW2. The rifle seems to be a P14. The Canadians used some of the US Warner Swazey scopes on Ross rifles but I don't believe I have seen one on a P14 (No. 3 Mk1 by that time) before.
Still doesn't mean much as far as the M1917 might go but i thought you might find it interesting.
Regards,
Jim
-
-
FREE MEMBER
NO Posting or PM's Allowed
Hi Jim,
Thank you for the pic. It`s interesting till now i thought this scope was only used in WW1 by the U.S. Army on the Springfield`s. The shooter is very close with his eye to the scope. Lucky to have this rubber cuff otherwise....
Best regards,
Ulrich
Not a well made sniper hide but good for the pic.
Last edited by gunner; 06-02-2009 at 12:39 PM.
-
Originally Posted by
gunner
Hi Jim,
Thank you for the pic.
It`s interesting till now i thought this scope was only used in WW1 by the U.S. Army on the Springfield`s. The shooter is very close with his eye to the scope. Lucky to have this rubber cuff otherwise....
Best regards,
Ulrich
Not a well made sniper hide but good for the pic.
Ulrich, The somewhat ascerbic firearms authority and author, E.C. Crossman wrote the Warner Swazey scope with its original unventilated eyeshield "would make a flincher out of a cigar store indian".
Regards,
Jim
-
-
FREE MEMBER
NO Posting or PM's Allowed
Hi Jim,
A nice description he made. I think i will make the scopemounts by myself becuase i didnt found one for the M 1917. All that i found was two types of mounts for the P14 and so as i can see they use drillholes on the chamber. I try to make one that leaves the rifle without any holes in metal or wood. So i have to think about the way to make this mounts stable without a wandrin POI. I hope it succeeds me.
Regards,
Ulrich