-
FREE MEMBER
NO Posting or PM's Allowed
need help with the history of my 303
I have a 303 with the crown then GR and B.S.A co. and SHT L.E. withe the three III also A 48854 with the six point star . my mag has a 4 on it and only holds 5 rounds.
BUT I HAVE A FIREING PROBLEM!!!! IT WILL BOLT BACK THEN PUSH IN AND IT WILL NOT HOLD THE FIRING PIN>BUT IF I BOLT BACK THEN PUSH THE RIGHT SIDE SAFTY ALL THEY WAY BACK .IT WILL HOLD THE FIRE PIN .BUT NO TRIGGER FIRE I HAVE TO PUSH THE SAFTEY BY MY RIGHT THUMB FOWARD THE IN WOULD FIRE! I HAVE NEVER DONE THIS WITH A HOT OR A ROUND IN THE CHAMBER BUT THROUGH TRING TO GET MY GUN TO FIRE THAT IS HOW I FOUND IT OUT > OITHERWISE I HAVE A GREAT FIGHTING STICK FOR NOW> PLEASE HELP WITH ANY ADVISE TO GET MY GUN WORKING PROPER!
Information
|
Warning: This is a relatively older thread This discussion is older than 360 days. Some information contained in it may no longer be current. |
|
-
02-28-2012 06:38 PM
# ADS
Friends and Sponsors
-
Legacy Member
Others will be along shortly that will be able to give you a more decisive answer, but off the top of my head I wonder if the safety assembly is assembled properly.
-
-
-
I'd like to help, having fixed a few Enfields with mechanical problems but in the nicest way, I (and I suspect most other readers on this forum.....)can't make head nor tail or understand a word that you're talking about! Will you write it in some other easily read and understandable way?
-
-
Legacy Member
Benvinci
I am going to try to reword what you have said.
When cycling the bolt with the safety off, the bolt will not cock.
If you engage the safety before closing the bolt, the bolt will cock.
The cocked bolt will not fire with the safety on.
Does this accurately describe your issue?
Question: with the bolt closed and the safety off, can you manually cock the bolt by pulling on the cocking piece?
Paul
-