-
FREE MEMBER
NO Posting or PM's Allowed
Dutch Mannlicher bolt stop spring length
Anybody owning said rifle could tell me the spring length?
The one on my rifle is broken and im looking to see if a clip latch spring or sear one is a suitable replacement. As those are the same diameter
Thanks
Information
|
Warning: This is a relatively older thread This discussion is older than 360 days. Some information contained in it may no longer be current. |
|
Last edited by Ced1942; 06-13-2018 at 08:59 PM.
-
06-13-2018 08:28 PM
# ADS
Friends and Sponsors
-
Legacy Member
The clip catch spring will fit the bolt stop on the M95.
The bolt stop spring dimensions are as follows:
Length 11.3mm
Diameter 6.3mm
Coils approx. 6 ends ground flat
Wire gauge 1mm
Hope this helps
Ian
-
-
-
FREE MEMBER
NO Posting or PM's Allowed
That wont do it unless i shorten the spring. Just finished cleaning the rifle and i tried putting the latch spring in the bolt stop. Bolt enter but wont come out. Spring got to mutch coil it cant be pressed enough to let the bolt out. Will probably just end up buying some spring from the hardware store with the dimension you gave me. Still thanks for the info that will be usefull.