-
"The Gray Ghost"
She was just one solid block of laminate when he started the custom fitting process through several visits over the last 9 months. Needless to say, the wait was worth it .......
Barrel make ..... The barrel is a MacLennan Stainless Steel, 1-12 twist, finishing at 27 inches without the break. It is a medium weight barrel and is about .750 diameter at the muzzle.
Stock make ..... The stock is custom and hand made by me from a Rutland laminated block and finished with about 25 coats of Tru Oil then rubbed down and polished.
Bottom metal ..... The detachable mag is by HS Precision and the bipod is a Harris "S" series.
Trigger ..... The trigger is a factory Remington 700. If it feels good I do nothing more then adjust it for travel and to about 2.5 lbs for weight. If it does not feel good then I will disassemble it, hone all mating surfaces and generally clean it up.
Rings and base ..... The base is a picatinny by Nightforce and the rings are Leupold.
Muzzle brake ..... The muzzle brake is by Holland. It is threaded on and needs to be indexed.
Reamer ..... The reamer is made by Pacific Tool and is called a 308 Bisley. It was chosen for its throat length so as to make it compatible with factory match 168 gr ammo.
Weight of rifle ..... With a scope and a fully loaded 10 rd mag the rifle weighs in at about 13 lbs. This weight is based on our Police Sniper version with a synthetic stock. Invidual custom rifles may vary slightly.
BTW, Keith's project for us the year before was to build my wife (~Angel~) her own custom rig, similar to mine. With it, she and her sniper partner (Scott) won first place as a civilian team in last year's Police/Military O.T.A.B. tactical sniper competition, held in August 2005 at Camp Borden. By invitation only, they competed with other civilian teams, as well as the sniper teams from various police tactical units, the RCMP and military. ~Angel~ and Scott worked like dogs (lots of running) for about a month before, training with Keith and Linda at Milcun and on their own time at the Sharon Gun Club, to get ready for that event.
~Angel~'s Custom Built by Milcun (Keith Cunningham) .308 Rifle
(Nicknamed "Wildfire")
(c/w Leupold 6.5-20x50mm LR/T M1 Scope with Luminated Reticle)
(Click PIC to Enlarge)
First 5 rounds (scope zero as delivered) at 100 Yards with Federal 168gr Match
(Click PIC to Enlarge)
Second 5 rounds (scope up 2 clicks) at 100 Yards with Federal 168gr Match
(Click PIC to Enlarge)
Regards,
Badger
Information
|
Warning: This is a relatively older thread This discussion is older than 360 days. Some information contained in it may no longer be current. |
|
Last edited by Badger; 09-24-2007 at 10:14 AM.
-
-
02-02-2007 09:38 AM
# ADS
Friends and Sponsors
-
Moderator
(Edged Weapons Forum)
-
-
-
FREE MEMBER
NO Posting or PM's Allowed
that's one nice piece of kit!!
-
FREE MEMBER
NO Posting or PM's Allowed
hell those are some nice guns
-
FREE MEMBER
NO Posting or PM's Allowed
Hi Badger,
This is craftmanship at an top level!!
Thanks for giving us an "inside" look at your newest building project.