Milsurps Talk Radio
+ Reply to Thread
Page 3 of 3 FirstFirst 1 2 3
Results 21 to 24 of 24

Thread: SWITZER's Firearms Auction Sale

Click here to increase the font size Click here to reduce the font size
  1. #21
    Senior Moderator
    (Founding Partner)


    Site Founder
    Claven2's Avatar
    Join Date
    Oct 2006
    Last On
    08-09-2023 @ 10:17 PM
    Location
    Scandaltown, Ontario
    Posts
    3,242
    Real Name
    Ronald
    Local Date
    04-27-2024
    Local Time
    01:00 AM
    ok, well I found out the K98kicon price from someone who attended the auction and if it was truely a vet return, it was on the higher side but not an unheard of price. It's about what I'd expect to pay at auction, actually. I'm a bit jealous too - pre-war vet bringbacks in righteous shape are far from common rifles The bright side is knowing the buyer, we'll see nice pics of it!
    Союз нерушимый республик свободных Сплотила навеки Великая Русь. Да здравствует созданный волей народов Единый, могучий Советский Союз!

  2. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Location
    Milsurps.Com
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  3. #22
    Administrator

    Site Owner
    Badger's Avatar
    Join Date
    Oct 2006
    Last On
    @
    Location
    Toronto, Canada
    Age
    75
    Posts
    12,944
    Real Name
    Doug
    Local Date
    04-27-2024
    Local Time
    02:00 AM
    Thread Starter
    My Videos in Video Club
    12

    Smile

    Quote Originally Posted by Claven2 View Post
    The bright side is knowing the buyer, we'll see nice pics of it!
    Here's a few pics, but I'll get the photo montage done in the next few weeks.

    June Purchases (click here)

    Regards,
    Badger

  4. Avoid Ads - Become a Contributing Member - Click HERE
  5. #23
    Legacy Member Cantom's Avatar
    Join Date
    Oct 2006
    Last On
    05-24-2021 @ 08:44 AM
    Location
    Ontario Canada
    Posts
    411
    Real Name
    Tom
    Local Date
    04-27-2024
    Local Time
    02:00 AM
    Quote Originally Posted by tiriaq View Post
    The rifle was genuine. The mount was also. So was the scope. The scope case was real. Unfortunately, they were not united during WW2. It was a parts set. The price it sold for was reasonable for the parts, which was the basis for the purchase. (I didn't buy it, but I know the purchaser.) Did you notice that when laddie installed the scope, the ring caps were rotated - numbers on the caps were on the right side? The rear ring also covered most of the scope markings.
    I was interested in the Kragicon, as a project, but I guess you wanted it more than I did.
    I just bought the rifle only and also found no T there. Otherwise a very nice rifle. There is some kind of black paint on the receiver, if the T is faint it might be full of paint.
    Last edited by Cantom; 10-04-2007 at 01:34 PM.

  6. #24
    Advisory Panel stencollector's Avatar
    Join Date
    Oct 2006
    Last On
    04-24-2024 @ 09:58 PM
    Location
    Shilo MB
    Posts
    795
    Local Date
    04-27-2024
    Local Time
    01:00 AM
    Quote Originally Posted by Pete04 View Post
    The scope tube numbers faced up, but were partially covered by the rear rings, which I presumed was because some one had installed them reversed. I didn't notice the blue or red marks on the scope tube. Frankly, once I saw that there was no T on the reciever, I new I was over my head since the other marks looked real enough. I therefor moved on, to leave it to the experts, of which there were plenty there let me assure you. LOL LOL The stake marks on the parts attatched to the reciever (which you attatch the scope mount to) were centre punched too far from the threads to do their job. IMHO Also these same screw slots were buggerd a bit. this may or may not be inportant, but it was enough ( in my ignorance) to put me off from bidding.
    Pete
    I am kind of reviving an old thread here, but the story on this sniper rifle wasn't quite over I guess. Since being sold at the auction, the rifle, scope, bracket, and scope can found their way to another dealer. Cantom and I bought the set....he wanted the rifle and I needed the scope and bracket (I got the can for good measure). The serial number on the bracket was just 3 digits away from my C/l\ marked Brit built 4T.

    I had a bit of a shock when I received the scope in that the elevation did not work. Drum turned and clicked just fine, but the pointer was stuck all the way down. After an afternoon of panicking, and some emails back and forth, I prepared to ship it off for o-haul, and found that the locking ring was loose and the drum wasn't working against the inner portion. Boy, did I feel like a doofus. Kind of like calling a tow truck cause the shift lever is still in drive and the car won't start (I was a mechanic in the army, and had to make a few recovery calls for this).

    Anyway, last night I went to remove the caps mounting the scope to reverse the front cap, which was backwards. I was happy when all 8 screws came out without problem. Cleaned up a little rust in the bracket, and reassembled the outfit correctly. The scope turns out to be a mk1 in the 10,000 serial range.

    The only techical problem I can see with the scope, which the seller pointed out before the puurchase, was a scratch on the forward lense. You see through it, so no problem that way.

    The prices on these things are going nuts. It cost me essentially what the whole outfit cost at the auction for just the scope, bracket, and can (no 8mk2, the canvas pouch type). I will likely resell the can, but then again, can a packrat part with anything?

    I am hoping to take the set out to the range later this afternoon and give her a sighting in. If it works out well, it wil take the load off my LB sniper, which I use for most of the milsurp and long distance matches.

+ Reply to Thread
Page 3 of 3 FirstFirst 1 2 3

Similar Threads

  1. Simpson Auctions - Military Firearms (March 31st)
    By Badger in forum Commercial Auction and Sale "Gossip"
    Replies: 0
    Last Post: 03-10-2007, 06:17 PM
  2. How to use the Commercial Auction/Sale "Gossip" Forum
    By Badger in forum Commercial Auction and Sale "Gossip"
    Replies: 0
    Last Post: 10-29-2006, 02:50 PM
  3. Surplus firearms magazine
    By dances with gophers in forum Book and Video Review Corner
    Replies: 8
    Last Post: 10-23-2006, 06:39 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts