-
FREE MEMBER
NO Posting or PM's Allowed
Looking for source to reline damascus shotgun barrels.
I recently inherited a very fine German made hammer gun that my uncle brought home from Germany in the early 1960s after a tour in the Army. Its probably a turn of the century piece, a guild gun of extremely high quality. The engraving is typical German style on the left, with stag in deep woods, and what I believe is a Weimaraner on the right. Stock trim is a very dark horn, including the buttplate. Its a gun worth saving
Unfortuneately, the barrels are damascus and in 16 gauge. I know Unc. used to hunt with this for years, but I dont want to take a chance. I'd really like to hunt this gun, it is too nice to be just a wall hanger. Does anybody know someone who can bore these out and insert some tubes (besides Briley - they only seem to do 12 gauge to 20 conversions). I think the wall thickness of the barrels is enough to get some 20 gauge tubes in there, though I could live with 28, as the gun is quite trim other than the barrel dia at the breech.
Information
|
Warning: This is a relatively older thread This discussion is older than 360 days. Some information contained in it may no longer be current. |
|
-
08-15-2009 05:47 PM
# ADS
Friends and Sponsors
-
Advisory Panel
Personally, if it were my gun, I wouldn't even think about sleeving the barrels. I would use it as is with appropriate loads.
-
-
-
Legacy Member
"...use it as is with appropriate loads...." No such thing.
"...bore these out..." Rarely enough steel. It isn't a solid tube either.
Spelling and Grammar count!
-
-
Advisory Panel
Birmingham Proof House will test and stamp damascus barrelled guns for smokeless powder.
Check Double Gun Journal. There is a body of information available about the contemporary use of damascus barrelled guns.
There are different opinions about the use of older guns.
And as they say, everyone has an opinion.
Check the proof marks on the wter table and barrels of the gun.
Incidentally, I have a pair of 16 to 20 gauge Browning inserts I won't be using.
Last edited by tiriaq; 08-16-2009 at 06:32 AM.
-
-
Legacy Member
VERY bad (and unncessary) idea
Sherman Bell's articles (beginning in Winter 1999) on numerous makes and models of damascus barrel shotguns in Double Gun Journal have pretty much debunked this myth of "dangerous damascus barrels." Heck, they still MAKE damascus barrels for shotguns in ENgland (very expensive!).
This guy was amazingly meticulous. Short of loading up a 30,000 PSI load (3X normal and 5X the powder load!) and no rust or pitting in the bore, they are perfectly okay to shoot. (oh, and the failures even then were not catastrophic).
If you remain paranoid, why not just use a slip-in CHAMBER INSERT and live with it as a .28 gauge or .410 caliber.
http://www.doublegunshop.com/chambermates.htm
have a competent person (buy a double-gun journal at Barnes and Noble for a list) inspect the bore and then shoot light field and target loads (or Black Powder if you like) and you will be fine.
Last edited by AKA Hugh Uno; 08-16-2009 at 07:39 AM.
-
-
FREE MEMBER
NO Posting or PM's Allowed
I checked with a German gun collectos group online
The proofs are nitro proofs, and one of the manufacturers does in fact make 16 to 20 gauge sleeves. I was only planning on using light low brass game loads....if I clamp the gun up and test fire it from a safe distance, I should be OK for occasional hunting, no? The bores are bright and shiney.
Everyone either seems to think damascus barrels are a death wish or they think those people are rumor mongers and damascus barrels are fine to shoot.
-
FREE MEMBER
NO Posting or PM's Allowed
Inserts
Sir....email me a price for those 16 to 20 gauge inserts if you want to sell.
Thanks!
-
FREE MEMBER
NO Posting or PM's Allowed
AKA Hugh Uno wrote: Sherman Bell's articles (beginning in Winter 1999) on numerous makes and models of damascus barrel shotguns in Double Gun Journal have pretty much debunked this myth of "dangerous damascus barrels."
Maybe top quality English Damascus barrels will still be OK, but I doubt Mr. Bell has seen some of the Damascus barrels I have seen, some of which were little more than orange iron lace. Most Damascus barrel shotguns in the U.S. were cheap Belgian guns, on the margin of safety when they were made and which have not improved with time. While they sometimes look good on the outside and appear shiny looking down the bore, sectioning the barrel will show that corrosion has eaten away at the welds to the point where I challenge Mr. Bell or anyone else to claim they are safe to fire with any load.
I have also seen a few Damascus barrels blow with both black and smokeless powder loads, and I consider calling the claim of "dangerous Damascus barrels" a "myth" highly irresponsible as a blanket statement, even if it is true for some guns or for some specific gun.
I cannot in good conscience recommend firing any Damascus barrel guns, and certainly not with modern loads.
I also don't recommend proof testing; proof testing (proving) a barrel is a potentially destructive test. If the barrel holds, fine. If it doesn't the gun is ruined, not a nice fate if the gun is a valuable collectible.
Jim
-
FREE MEMBER
NO Posting or PM's Allowed
For loads go to ...
www.16ga.com they have a group using special reloads.
Also google "Teague" as he doe relining BUT expensive.
It will still be a 16ga.
"Try it you'll like it!"
-
FREE MEMBER
NO Posting or PM's Allowed
I beleive Briley either makes liners or tube inserts.