I recently bought an Enfield .303 Brit and some ammunition. I got S & B because it is boxer primed and reloadable. On firing the reloaded S & B, a high percentage of shells came apart about 1/2 inch from the rear. This only happened with this brand. The reloaded R P shells had no problem with same load and bullet. The S & B cases appeared to be very thin as compared to a R P case that I cut open. I suggest not reloading S & B cases, or at least very minimum loads.
BuntlineguyInformation
Warning: This is a relatively older thread
This discussion is older than 360 days. Some information contained in it may no longer be current.