It's been a while since I refinished one... (Tales of a refurbished Enfield P14)

[louthepou]

Hi folks,

I know, I know, my productivity has slowed down somewhat. Blame it on summer vacation, splitting fire wood, etc, etc...

Anyways, here's what I've finally been able to work on for the past couple of weeks.

I got this P14 part of a two-rifle deal for a reasonable price considering the shape it was in. It probably had been a while since someone took it completely apart; but don't trust my words, here's a... pictorial! Woohoo!

First, taking a look at the rifle before I took it apart. Damage to the front handguard and rust on metal bits;


Handguard ring and rear handguard partially removed;


And (I like this one) underside of the trigger assembly once removed from the forend.


So I started working on the metal parts. Removed all the crud, some of which was a mix of sand, dust, hardened grease... I suppose, anyway. Rust had to be removed, which left some areas of some parts (middle band, front band, etc) bare; so I had to reblue these parts. I know it can sound harsh on a project like this one; but if the rust is too serious, it needs to come off; and bare metal will just start rusting again soon, so... bottom line, what I didn't absolutely need to touch, I didn't touch. For example, the barrel was left with its original protective "gunk":

Then, I moved on to the wood. Both handguards needed repairs. The front one, I cut a square chunk where there was a missing piece.


I glued a spare piece of wood, slightly larger; I then carved the excess wood.


Except for the repaired areas, only very fine steel wool was used for wood prep (after cleaning with paint thinner). linseed oil was then used for finishing.

So all things considered, about 12 hours well spent. This Winchester-made P14 should shoot well, the bore and rifling are nice - can't wait to try her at the range!

Comments, advices, always welcomed,

Lou

Information

Warning: This is a relatively older thread This discussion is older than 360 days. Some information contained in it may no longer be current.