+ Reply to Thread
Page 1 of 2 1 2 LastLast
Results 1 to 10 of 14

Thread: Indian captured Pakistan No.4 rifle pictures

Click here to increase the font size Click here to reduce the font size
  1. #1
    Advisory Panel breakeyp's Avatar
    Join Date
    Jul 2007
    Last On
    03-27-2024 @ 03:29 PM
    Location
    near Detroit Michigan
    Age
    77
    Posts
    963
    Real Name
    Paul Breakey
    Local Date
    04-28-2024
    Local Time
    12:44 PM

    Indian captured Pakistan No.4 rifle pictures

    Once in awhile an odd ball shows up. This weekend I found this 1960 production POFicon (Pakistan Ordnance Factory) which has matching numbers including magazine. All original serial numbers have been lined out and the manufactures mark, "P 60" has also been struck out. New matching serial numbers with a CPJ suffix have been added to all normal serial number locations including the magazine. The forestock has the "Indian" transverse screw.

    Pakistan and India have had dust ups since 1965 and the biggest was December 3-16 1971. The cancellation of the other guy's markings and substituing your own has been encounted with other arms/countries. I have a Russianicon Nagant sniper rifle from Vietnam (with capture papers) that has had all Russian markings lined out on metal and wood.

    This is all guess work but I think reasonable. I wonder what is the significance of the CPJ suffix. Probably a unique series developed by the bean counters to account for captured and reused material.

    I wonder if Pakistan captures one back, will they change the serial numbers back? If this goes on for a few more iterations, there will not be enought metal available for the new serial numbers!
    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.

  2. The Following 2 Members Say Thank You to breakeyp For This Useful Post:


  3. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Location
    Milsurps.Com
    Age
    2010
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  4. #2
    Legacy Member gravityfan's Avatar
    Join Date
    Jan 2008
    Last On
    Yesterday @ 11:09 PM
    Location
    Portland, OR
    Posts
    74
    Local Date
    04-28-2024
    Local Time
    09:44 AM
    Obviously, Sahib, it stands for Captured Paki Junk, by golly.

  5. Avoid Ads - Become a Contributing Member - Click HERE
  6. #3
    Legacy Member bearhunter's Avatar
    Join Date
    Oct 2006
    Last On
    04-25-2024 @ 08:14 AM
    Location
    Okanogan, BC
    Posts
    509
    Local Date
    04-28-2024
    Local Time
    09:44 AM
    gravityfan, I hope that slur was tounge in cheek. No, I'm not Pakistani.

    As for the POFicon, No4 MkII, I personally think they are some of the best Lee Enfield variants on the market right now. Maybe even better than the Britishicon made rifles.

    They have excellent and tight fitting circasion walnut furniture and usually excellent bores that measure out on the tight side, .310 or less, nothing yet over .311.

    The POF No4 MKIIs have proven to be very accurate as well. They are made on ex British tooling and follow the specs to the letter.

    "Junk" is hardly a decent description of these rifles. I will admit that they are usually covered in old, dried cosmolene and dirt when they are first encountered but they usually have all matching numbers and have been stored properly. That describes the POF rifles that have appeared in Canadaicon anyway.

    There must be something good about them. There were literally thousands of them imported into Canada and most sold anywhere from $275 - $350, without accessories, such as slings or bayonets. The accessories had to be purchased separately. I'm still looking for a Pakistani sling.

    They first started to show up about two years ago and were plentiful. They are drying up fast as appreciation for their quality becomes known. In Canada anyway, I'll bet they will be as hard to find as the Indian 2A and 2A1 rifles are right now. At first, the .308 series 2 rifles were a hard sell as they were dirty and dinged. Now as shooters have been using them for a while, appreciation for them has grown so that they now command a premium price. No, it's not because of the cartridge it's chambered for either. I suspect the POF No4 MkI and MkII rifles will do the same by next year.

    Purchase one while you still have the chance and wipe your nose.
    Last edited by bearhunter; 09-24-2009 at 04:53 AM.

  7. Thank You to bearhunter For This Useful Post:


  8. #4
    FREE MEMBER
    NO Posting or PM's Allowed
    bradtx's Avatar
    Join Date
    Jan 2009
    Last On
    11-29-2010 @ 08:01 AM
    Location
    Pearland, TX
    Posts
    302
    Local Date
    04-28-2024
    Local Time
    10:44 AM
    beerhunter, We didn't seem to get the quantity of POFicon rifles y'all did. Sad for us.

    Hopefully those with POF rifles will eventually post up about them so that we can all learn.

    Brad

  9. #5
    Advisory Panel breakeyp's Avatar
    Join Date
    Jul 2007
    Last On
    03-27-2024 @ 03:29 PM
    Location
    near Detroit Michigan
    Age
    77
    Posts
    963
    Real Name
    Paul Breakey
    Local Date
    04-28-2024
    Local Time
    12:44 PM
    Thread Starter
    I must have gone out for popcorn, because I have yet to see a bad POFicon rifle. Springfield Sporters brought in a bunch about 8 years ago and they were all in good condition to excellent. I agree the fit and finish is as good as those built by Long Branch. I have never seen a Lee I didn't like.

  10. #6
    Legacy Member gravityfan's Avatar
    Join Date
    Jan 2008
    Last On
    Yesterday @ 11:09 PM
    Location
    Portland, OR
    Posts
    74
    Local Date
    04-28-2024
    Local Time
    09:44 AM
    Most definitely tongue in cheek. I have some dear Indian and Pakistani friends; so no racial slurs from me, merely light-hearted terms of endearment. Just check the list of Indian VC recipients to know what great people these are, yet no Hollywood films show dot-heads taking part in D-Day, or any other major battle for that matter. They were major contributors in both wars. A shame their heroism and service to the crown usually goes unremarked.

    Knowing the terrible hatred between parts of what, until Partition, were one country divided only by religion; and knowing the sometimes ironic humour and use of English by my wobble-head friends, it just struck me as something they might actually do to call the captured rifles that way.

    In fact I must look out for one of those, they are my initials. I could kid on that it had been personalised!

    I do also have a P.O.F. No.2 (1960). Just about unfired condition when I got it, and it is one of my most accurate shooters. Very nicely put together, as others have mentioned. Definitely not something to be down-played. I would rate it in terms of build quality and shooting accuracy as the equal of my '55 UFs and '50s PFs.

    Just my tuppence worth. Namaste.

  11. #7
    Advisory Panel
    Peter Laidler's Avatar
    Join Date
    Jul 2008
    Last On
    Today @ 11:48 AM
    Location
    Abingdon, Oxfordshire. The home of MG Cars
    Posts
    16,513
    Real Name
    Peter Laidler
    Local Date
    04-28-2024
    Local Time
    05:44 PM
    And so you should rate it as highly as a PF or UF rifle because they were all made on the same machinery - although there is a bit of doubt as to whether the machinery that went to Pakistan was all Fazakerley or a mix of Fazakerley and the old BSA machinery that went up to Fazakerley for storeage and perhaps use after BSA ceased their Ministry of Supply contracts.

    As soon as the No4 machinery went out, the L1A1 machinery was moved in and according to Police Inspector XXXX who ran the security aspects of the ROF there, industrial relations plummeted from 'extremely dire' to 'even more extremely dire.....' (his words to me...). What happened next has gone into history but while they could happily churn out unwanted No4 rifles, modernising to manufacture what the Ministry of Supply wanted was a step to far.

    Oh yes, where were we.............?

  12. #8
    Legacy Member biggles's Avatar
    Join Date
    Apr 2008
    Last On
    08-12-2023 @ 07:25 PM
    Location
    Burlington, Ontario
    Posts
    26
    Real Name
    Peter
    Local Date
    04-28-2024
    Local Time
    12:44 PM

    POF #4 Mk2

    Now that is music to my ears...my wife brought me one (with a little coaching) for my birthday last week. A 1958 POFicon No.4 Mk.2 & my first #4.
    Still quite a bit of cosmo on it too. I managed to pick up a POF #9 bayonet at a gunshow & now just need a sling.
    Peter (Burlington, Ontario)

    Quote Originally Posted by bearhunter View Post
    gravityfan, I hope that slur was tounge in cheek. No, I'm not Pakistani.

    As for the POF, No4 MkII, I personally think they are some of the best Lee Enfield variants on the market right now. Maybe even better than the Britishicon made rifles.

    They have excellent and tight fitting circasion walnut furniture and usually excellent bores that measure out on the tight side, .310 or less, nothing yet over .311.

    The POF No4 MKIIs have proven to be very accurate as well. They are made on ex British tooling and follow the specs to the letter.

    "Junk" is hardly a decent description of these rifles. I will admit that they are usually covered in old, dried cosmolene and dirt when they are first encountered but they usually have all matching numbers and have been stored properly. That describes the POF rifles that have appeared in Canadaicon anyway.

    There must be something good about them. There were literally thousands of them imported into Canada and most sold anywhere from $275 - $350, without accessories, such as slings or bayonets. The accessories had to be purchased separately. I'm still looking for a Pakistani sling.

    They first started to show up about two years ago and were plentiful. They are drying up fast as appreciation for their quality becomes known. In Canada anyway, I'll bet they will be as hard to find as the Indian 2A and 2A1 rifles are right now. At first, the .308 series 2 rifles were a hard sell as they were dirty and dinged. Now as shooters have been using them for a while, appreciation for them has grown so that they now command a premium price. No, it's not because of the cartridge it's chambered for either. I suspect the POF No4 MkI and MkII rifles will do the same by next year.

    Purchase one while you still have the chance and wipe your nose.

  13. #9
    Legacy Member bearhunter's Avatar
    Join Date
    Oct 2006
    Last On
    04-25-2024 @ 08:14 AM
    Location
    Okanogan, BC
    Posts
    509
    Local Date
    04-28-2024
    Local Time
    09:44 AM
    Thanks for the clarification gravityfan, I really appreciate it. This is a quality site and I don't want to see it reduced to that level. Unlike many, you are very well informed on the Indian/Pakistan dispute, I'm impressed and salute you.
    bradtx, I've been known to knock back a few in my lifetime but I have and allergy to the chemicals used to age commercial beers so the handle is "bearhunter", which I do avidly. :-)

  14. #10
    Deceased January 15th, 2016 Beerhunter's Avatar
    Join Date
    Dec 2007
    Last On
    01-02-2016 @ 04:03 PM
    Location
    Hampshire, England
    Posts
    1,181
    Local Date
    04-28-2024
    Local Time
    04:44 PM
    Quote Originally Posted by bradtx View Post
    beerhunter, We didn't seem to get the quantity of POFicon rifles y'all did. Sad for us.

    Hopefully those with POF rifles will eventually post up about them so that we can all learn.

    Brad
    Check your reading glasses. This is my first post on this thread.

+ Reply to Thread
Page 1 of 2 1 2 LastLast

Similar Threads

  1. Marking on an Indian No. 1 Mk III*
    By Pattern14 in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 2
    Last Post: 09-17-2009, 09:19 AM
  2. Pictures - 1950s USMC Rifle issue and rifle cleaning
    By Joe W in forum M1 Garand/M14/M1A Rifles
    Replies: 2
    Last Post: 05-06-2009, 10:40 PM
  3. A bit OT but its about the CW and Indian war period
    By John Sukey (Deceased) in forum Other U.S. Service Rifles
    Replies: 3
    Last Post: 04-23-2009, 08:55 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts