RFI pictures

[arado]

I took pictures of my RFI T. This is with my repro 32 scope mount. I do not know who made the mount. It is very close to my originals (3). Other pics to follow. Thanks, Gary

Information

Warning: This is a relatively older thread This discussion is older than 360 days. Some information contained in it may no longer be current.

[arado]

Yea.. it worked. Here is another Gary

[arado]

One more pic. Still remembering how to do it. It will get better. Gary

[madcratebuilder]

Gary, your repro 32 scope mount appears identical to the one I have from Numrich. My repro mount attaches to my 4(T) like it was made for it, don't know if it collimates the scope or not.

[Badger]

Hi Arado ...

You don't have to put one pic in each post...

You can upload multiple pics into a single post using the same "Manage Attachments" button you used for the single pic. Simply select a different pic from your local computer (or internet) for EACH line that says "Choose File".

In fact, you can upload up to 10 pics each screen, then select "Manage Attachments" again, to upload another 10 and so on ...

Regards,
Badger

[RJW NZ]

You've got a well known repro T mount. You'll have to do a check with it. First tighten one wheel and see if the other end of the mount is contacting the pad there, or if it is hanging clear above the pad.
If it is high then you'll need to do some tweaking, they're known to require a bit of last minute sorting out. Repeat process to look at other end, don't cut metal until you're sure which end needs it.

[arado]

Hi Arado ...

You don't have to put one pic in each post...

You can upload multiple pics into a single post using the same "Manage Attachments" button you used for the single pic. Simply select a different pic from your local computer (or internet) for EACH line that says "Choose File".

In fact, you can upload up to 10 pics each screen, then select "Manage Attachments" again, to upload another 10 and so on ...

Regards,
Badger

Thanks for the help. I think I'll become a contributing member. Gary

[Badger]

Thanks for the help. I think I'll become a contributing member. Gary

Thank you Gary ... much appreciated ...

Regards,
Doug (Badger)

[arado]

You've got a well known repro T mount. You'll have to do a check with it. First tighten one wheel and see if the other end of the mount is contacting the pad there, or if it is hanging clear above the pad.
If it is high then you'll need to do some tweaking, they're known to require a bit of last minute sorting out. Repeat process to look at other end, don't cut metal until you're sure which end needs it.

Thanks but already tested as advised by Peter Laidler. The mount is straight and true to the pads, solid as a rock and concentric to bore. My RFI "T" is done. Time to put the bastard to sleep until Spring. Gary