+ Reply to Thread
Results 1 to 3 of 3

Thread: Newbie Enfield Lession

Click here to increase the font size Click here to reduce the font size
  1. #1
    FREE MEMBER
    NO Posting or PM's Allowed
    traindriver's Avatar
    Join Date
    Mar 2010
    Last On
    04-27-2012 @ 01:02 AM
    Posts
    20
    Local Date
    05-08-2024
    Local Time
    09:09 AM

    Newbie Enfield Lession

    I think I made a big newbie mistake at a show yesterday. Had not been in the show five minutes and a guy walked by with a MKIII for sale. He had a 1917 BSA all matching with a mirrow shiny bore. This was the cleanest Enfield of any model I have seen in the last few months since I started collecting. The gent was asking $289.00. The thing that made me hesitate was the magazine literally rattled in the mag well it was so loose. It held firm from front to rear but had a lot of movement from side to side. I had never handled a Enfield that had that issue. I told the guy that I would look around a little and find him If I decided to haggle later. Mean while I spoke with some seasoned Enfield guys that said buy as the loose mag issue was an easy fix. Well I looked all over to find the dude with the MKIII on his shoulder. In frustration I decided the leave the show and as I started out the door who did bump into? The smiling Englishman who had, yes had (past Tense) the MKIII. He said a few minutes after we talked some young guy came up and bought it. I kicked my own butt all the way home! I was concerned about feed issues with the rifle thus I hesitated on buying it. So fellows, was my concerns legit in the case of Enfield Riflesicon??
    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.

  2. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  3. #2
    Legacy Member finloq's Avatar
    Join Date
    May 2010
    Last On
    02-16-2022 @ 01:17 AM
    Location
    SoCal
    Posts
    214
    Local Date
    05-08-2024
    Local Time
    06:09 AM
    Everyone has a "one that got away" storey. It is par for the course. Don't worry about it. There are still plenty of nice No.1's out there. Just don't fall into the "I'm going to buy the next one that I see, no matter what!" trap.
    "Self-realization. I was thinking of the immortal words of Socrates, who said, "... I drank what?"

  4. Avoid Ads - Become a Contributing Member - Click HERE
  5. #3
    Advisory Panel smellie's Avatar
    Join Date
    Jan 2008
    Last On
    01-14-2019 @ 09:17 AM
    Location
    Virden, Man. Pop 3250, 4 miles from Wolverine's range!
    Posts
    632
    Local Date
    05-08-2024
    Local Time
    09:09 AM
    If you take a close look at one of those old magazines, you will notice that they were individually-made; the technology did not yet exist for deep-drawing steel that thin. The magazines were made from steel-sheet stampings, bent into shape and brazed together. With such a system, it is not surprising at all that the odd one was a bit smaller than the rest and accidentally was fitted into a looser rifle.

    When the rifles were built, magazines were fitted to them individually, precisely so they would make a good, solid fit.

    What you were looking at, likely, was a rifle in which the magazine had been changed.

    Better luck next time, friend! With eyes like yours, you WILL luck out sooner or later.

  6. The Following 2 Members Say Thank You to smellie For This Useful Post:


+ Reply to Thread

Similar Threads

  1. Newbie Win 97 question
    By LimeyCarbineLover in forum Military Shotguns
    Replies: 5
    Last Post: 10-17-2009, 03:35 PM
  2. Newbie
    By Ronald Mancini in forum M1/M2 Carbine
    Replies: 1
    Last Post: 09-18-2009, 06:39 PM
  3. reloading newbie
    By r22r in forum Ammunition and Reloading for Old Milsurps
    Replies: 3
    Last Post: 06-08-2009, 12:13 PM
  4. Should I buy it? Newbie questions
    By ralfus in forum Krag Rifles
    Replies: 4
    Last Post: 05-27-2009, 10:47 AM
  5. Newbie
    By asin in forum Krag Rifles
    Replies: 2
    Last Post: 04-11-2009, 09:12 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts