+ Reply to Thread
Results 1 to 9 of 9

Thread: Caution: Questionable M1917's

Click here to increase the font size Click here to reduce the font size
  1. #1
    Legacy Member Cass's Avatar
    Join Date
    Mar 2009
    Last On
    04-15-2024 @ 06:04 PM
    Posts
    50
    Local Date
    04-28-2024
    Local Time
    11:35 AM

    Caution: Questionable M1917's

    I hate to keep harping on this, but oldguns.net continues to list M1917's that are questionable at best. Anyone who buys from them should use extreme caution.

    Here are the latest:

    SMOF5360 - (*5377*) EXCELLENT U.S. RIFLE MODEL 1917 MADE BY WINCHESTER SERIAL NUMBER 119441 MANUFACTURED JANUARY 1918. CALIBER 30-06 BARREL DATE 1-18. ALL MATCHING. ....

    This is handsome Winchester Model 1917. It is not one of the rifles that was reworked and it still has the original bluing on the barrel and receiver which would rate over 97% with just a little fading. The bore is bright with strong lands and grooves. The stock is Winchester marked as are the bolt and ALL of the small parts. Winchester M1917 rifles are the most desirable of the Model 1917s. Rifles with original finish like this one has are rare and even more desirable. We suspect that this is an old DCM sales gun from the 1940s-1950s, but cannot document it. If you are looking for a well above average example of a Winchester M1917 rifle, this is an excellent choice. $1295.00 (View Picture)



    The finish is definitely not "original finish" and the rifle appears to have been restored and had a blued finish applied over the rougher finish that it received during a previous rebuild.

    Here is another:

    SMOF5332 - EXCELLENT! ALL MATCHING U.S. RIFLE MODEL 1917 MADE BY EDDYSTONE SERIAL NUMBER 614171 BARREL DATE 4-18. ......

    This rifle was made in the summer of 1918 at the Eddystone plant in Pennsylvania. It has ALL correct Eddystone parts and it retains about 95% of its bluing. The barrel is bright with excellent riflings. The walnut stock is the correct Eddystone stock and has a few storage dings, but no major cracks or gouges. $950.00 (View Picture)

    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.
    Last edited by Cass; 11-07-2010 at 09:07 AM.

  2. The Following 2 Members Say Thank You to Cass For This Useful Post:


  3. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  4. #2
    Advisory Panel Surpmil's Avatar
    Join Date
    Feb 2008
    Last On
    @
    Location
    West side
    Posts
    4,703
    Local Date
    04-28-2024
    Local Time
    09:35 AM
    P.T. Barnum price guide as well I see!

    I wouldn't say the Winchesters were better than the Remingtons. It is pointed out in "The US Enfield" by Skennertonicon that the AEF in WWI asked that no more Winchester rifles be sent to Franceicon due to non-standard components being used.

    Of course there might have been some politics/nepotism/corruption involved in that as per the Chauchat/Lewis Gun saga.
    “There are invisible rulers who control the destinies of millions. It is not generally realized to what extent the words and actions of our most influential public men are dictated by shrewd persons operating behind the scenes.”

    Edward Bernays, 1928

    Much changes, much remains the same.

  5. Avoid Ads - Become a Contributing Member - Click HERE
  6. #3
    FREE MEMBER
    NO Posting or PM's Allowed
    mike16's Avatar
    Join Date
    Oct 2010
    Last On
    07-18-2017 @ 07:31 PM
    Posts
    212
    Local Date
    04-28-2024
    Local Time
    11:35 AM
    a little pricey but whats questionable about them?

  7. #4
    Legacy Member Cass's Avatar
    Join Date
    Mar 2009
    Last On
    04-15-2024 @ 06:04 PM
    Posts
    50
    Local Date
    04-28-2024
    Local Time
    11:35 AM
    Thread Starter
    Quote Originally Posted by mike16 View Post
    a little pricey but whats questionable about them?
    The finish on them is nothing like the original blued finish they claim to be. They appear to be examples that went through a rebuild and received a parkerized finish, then have been restored back with a newer type blued finish.

  8. #5
    FREE MEMBER
    NO Posting or PM's Allowed
    mike16's Avatar
    Join Date
    Oct 2010
    Last On
    07-18-2017 @ 07:31 PM
    Posts
    212
    Local Date
    04-28-2024
    Local Time
    11:35 AM
    Two issues and From a fng...

    First I made the mistake of assuming my december 1918 eddystone m1017 was blued until I read Ferris's book and realised that there were shades of parkerizing and textures of parkerising that could confuse the uninitiated including my self. Pics can be deceptive so, after looking closely at these pictures and having read Farris's book and knowing the mistakes I made I would humbly recommend that we take a closer and longer look at those pictures of old blued rifles.

    also having read Ferris's book. winchester rifles WERE used overseas and distribution was limited to those manufactured after Jan 1918. The issue of non standard parts being used only applies to parts manufactured by Winchester befor eddy, remington and winchester all agreed on standardisation. the real problem there was not that the three manufacturers did or did not agree on standardised dimentions. it was the Dept of the army that either could not agree or did not do so in a timely fashion. Ferris's book is pretty interesting in this respect. The politics might be that winchester was loosing money while thier employees stood around for months at a time waiting for Dept of Army to make a choice. They put thier employees to work, produced rifles and while every body else was still standing around the news papers got hold of the scandal and made the army look bad. The politics was that Winchester got punished and in spite of thier effort lost millions.

    Ferris's book in a must read.

    They are pricey but look very nice. If I had the money they would be on the throne in my gun safe.
    Last edited by mike16; 11-07-2010 at 06:14 PM.

  9. #6
    Legacy Member Cass's Avatar
    Join Date
    Mar 2009
    Last On
    04-15-2024 @ 06:04 PM
    Posts
    50
    Local Date
    04-28-2024
    Local Time
    11:35 AM
    Thread Starter

    Post

    Mike, Nick's book is indeed a good one.

    Here is a picture of what the original finish actually looks like on a Winchester is that serial range. Notice how the blue has an almost translucent appearance and how the metal is highly polished under the finish. Also notice the appearance of the stamps and the area around them.



    Last edited by Cass; 11-07-2010 at 06:40 PM.

  10. Thank You to Cass For This Useful Post:


  11. #7
    Contributing Member Aragorn243's Avatar
    Join Date
    Apr 2009
    Last On
    Today @ 07:41 AM
    Location
    Pennsylvania, United States
    Posts
    7,023
    Real Name
    Steve
    Local Date
    04-28-2024
    Local Time
    12:35 PM
    I can't say that I know this to be correct but I believe I read somewhere that during the arsenal rebuilds the metal was sandblasted or something similar to that which removed all traces of rust and/or the old finish prior to being re-finished. This is what gives the metal the rougher texture and reduces the clarity of the stampings.

    If that is the case, it would appear that both rifles in the first post went through the re-finishing process.

  12. #8
    FREE MEMBER
    NO Posting or PM's Allowed
    mike16's Avatar
    Join Date
    Oct 2010
    Last On
    07-18-2017 @ 07:31 PM
    Posts
    212
    Local Date
    04-28-2024
    Local Time
    11:35 AM
    it seems that they may be wrong. I have made the same mistake with equal enthusiasm. the winchester is a bit over priced but they always seem to weather its an M1917 an M1icon carbine or Rifle. I actualy held my rifle in my hand and...with all my presumed knowlege stated that it was blued.I was wrong. I can understand where someone else would as well.

  13. #9
    FREE MEMBER
    NO Posting or PM's Allowed
    chevy1981enfield1943's Avatar
    Join Date
    Aug 2010
    Last On
    12-06-2010 @ 09:18 AM
    Location
    WESTERN, PA
    Age
    41
    Posts
    18
    Local Date
    04-28-2024
    Local Time
    11:35 AM
    gawd, for that price one could buy two very nice models from gunbroker lol

+ Reply to Thread

Similar Threads

  1. Questionable 30-rounder
    By dnikkor in forum M1/M2 Carbine
    Replies: 3
    Last Post: 11-25-2009, 05:25 PM
  2. Q on Brit/Canada use of M1917's
    By Too Much Coffee in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 13
    Last Post: 10-21-2009, 01:37 PM
  3. A word of caution
    By limpetmine in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 0
    Last Post: 10-02-2009, 10:36 PM
  4. A Note of Caution!
    By John Kepler in forum The Watering Hole OT (Off Topic) Forum
    Replies: 8
    Last Post: 07-28-2009, 01:14 AM
  5. virus caution on flee bay
    By RJW NZ in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 1
    Last Post: 03-04-2009, 09:55 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts