+ Reply to Thread
Page 1 of 2 1 2 LastLast
Results 1 to 10 of 18

Thread: Jeez it's hot this year....

Click here to increase the font size Click here to reduce the font size
  1. #1
    Advisory Panel Son's Avatar
    Join Date
    Oct 2006
    Last On
    03-26-2024 @ 07:30 AM
    Location
    On the right side of Australia, below the middle and a little bit in from the edge.
    Posts
    1,239
    Local Date
    04-29-2024
    Local Time
    09:52 PM

    Jeez it's hot this year....

    I've just come inside into the A/C for a rest. It's 41 C outside, that's 106 F in the old money. I'm working in my gunroom in the shed trying to mount a rack on the wall behind the bench. Had to tear half the room apart to fit it in, and don't look like I'll get it tidied up today.
    It will be worth the trouble once I get it done. Here's a pic of it in the yard... time to get back to it.
    Attachment 18563
    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.

  2. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Location
    Milsurps.Com
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  3. #2
    Legacy Member 5thBatt's Avatar
    Join Date
    Dec 2007
    Last On
    04-25-2024 @ 03:13 PM
    Location
    Zombie Town, now with a H
    Posts
    774
    Local Date
    04-29-2024
    Local Time
    10:52 PM
    Look forward to the photo of it in place & full!!

  4. Avoid Ads - Become a Contributing Member - Click HERE
  5. #3
    Head Moderator
    (Founding Partner)

    Site Founder
    Stevo's Avatar
    Join Date
    Oct 2006
    Last On
    08-31-2015 @ 06:39 PM
    Location
    NW Alberta
    Posts
    2,357
    Local Date
    04-29-2024
    Local Time
    04:52 AM
    -25C when I woke up this morning here. Supposed to be up to -7 by tomorrow afternoon.

  6. #4
    Legacy Member Bruce_in_Oz's Avatar
    Join Date
    Jun 2008
    Last On
    Today @ 05:29 AM
    Location
    Brisbane
    Posts
    2,249
    Local Date
    04-29-2024
    Local Time
    08:52 PM
    I remember those racks. They should come with a steel internal locking bar and a set of timber door panels that can be locked with a padlock attached to an extension tongue on the internal bar.

    If you look closely at the photo, you will see two hinged strips for supporting the rifles. In their original trim, these boxes were dual purpose: one way up, the hinged strip with the rounded notches was for SMLEs. If you inverted the box, the second hinged strip with the triangular notches was for L1A1 storage. I have a complete, but slightly battered example which retains the usage markings. Most examples had external handles, however, heaving a full one (20 rifles) onto the back of a truck was no fun at all.

    The advent of the AUG/F88 and drastically increased security regulations in the 1990s meant the end of service for these boxes.

    Originally they were painted "bronze green" with white text markings. In later years, they copped the ubiquitous "olive drab" look

  7. Thank You to Bruce_in_Oz For This Useful Post:

    Son

  8. #5
    Legacy Member xa-coupe's Avatar
    Join Date
    Jul 2010
    Last On
    01-04-2024 @ 04:41 AM
    Location
    Australia
    Posts
    503
    Local Date
    04-29-2024
    Local Time
    09:52 PM
    I think it's time to air condition the gun room myself.

  9. #6
    Advisory Panel Son's Avatar
    Join Date
    Oct 2006
    Last On
    03-26-2024 @ 07:30 AM
    Location
    On the right side of Australia, below the middle and a little bit in from the edge.
    Posts
    1,239
    Local Date
    04-29-2024
    Local Time
    09:52 PM
    Thread Starter
    Thanks for the first hand history, Bruce. I have the locking bar, but the door panels were long gone. Other than a few deep drag marks- scratches underneath (in .303 mode, in FN mode they'd be on top so I guess this box carried Lee Enfields at least since it's last paint job) it is in very good condition. The latest designation is stenciled on the end and there is even a hint of over spray around where the stencil sat.

    When i have my next safe storage inspection I'll ask the good officer if it would pass Cat A & B storage with new doors (taking into consideration the security on the room...). It might be ok with a couple of extra external locking bars. I just think it would look great if I could use armoured glass doors! I don't really want to do anything that would alter it noticeably though.

    5thBatt, I don't think I've got enough to fill it up. I know the couple I have with L butts on them won't fit, the two snipers won't go in properly either- the carbines don't look right, so I'm down to standard SMLE's- even the range rifle won't go in! I think it's destined to be the new backdrop for my portraits- retire the green tarp and the aiming stand, sit the HT transit case in and set rifles on it for pics.

    Oh, and Stevo... you can keep your minus 12, mate... I'll suffer happily in the 40 c heat rather than be that cold any day. No more complaints about climate from me!

  10. #7
    Legacy Member 5thBatt's Avatar
    Join Date
    Dec 2007
    Last On
    04-25-2024 @ 03:13 PM
    Location
    Zombie Town, now with a H
    Posts
    774
    Local Date
    04-29-2024
    Local Time
    10:52 PM
    Quote Originally Posted by Son View Post
    5thBatt, I don't think I've got enough to fill it up. I know the couple I have with L butts on them won't fit, the two snipers won't go in properly either- the carbines don't look right, so I'm down to standard SMLE's
    Sounds like you have your challenge for 2011

  11. #8
    Legacy Member bearhunter's Avatar
    Join Date
    Oct 2006
    Last On
    04-25-2024 @ 08:14 AM
    Location
    Okanogan, BC
    Posts
    509
    Local Date
    04-29-2024
    Local Time
    03:52 AM
    I used to pass some time away in a glass bottle making factory. Temps in there ran up to 45 C in the winter time. After 12 hours of that heat, out to the Ute at Christmas time in -30 C temps with a 25 klik wind. The wind was caused by the heat coming off the furnaces/ annealing lehrs and rising through louvres in the roof. The diesel engine in that poor old Dodge 2500 Ute moaned and groaned but always started. The odd time temps drop below - 40 C and there is a bit of a breeze, the fuel gels and they just won't start.

    Honestly, I think I prefer the cold over +40C temps. At least I can dress for the cold. Mind you once your body is acclimatised I guess it isn't so bad.

    Thanks for posting the pic of the cabinet and the No1 rifles. I never seen a cabinet like that before. Is it unique to OZ?

  12. #9
    Advisory Panel Son's Avatar
    Join Date
    Oct 2006
    Last On
    03-26-2024 @ 07:30 AM
    Location
    On the right side of Australia, below the middle and a little bit in from the edge.
    Posts
    1,239
    Local Date
    04-29-2024
    Local Time
    09:52 PM
    Thread Starter
    Bearhunter, I think they might be unique to Aus. From what has been said by Bruce and also Lithy before, they must have been used for transportation as well as storage and issue racking. These days of course in this SC PC world we live in a box with twenty rifles at 8+Lbs each would be a manual handling no-no! I have seen other old crates which carried eight rifles with bayonets, but they would not have been useable as racks to issue the rifles from.

  13. #10
    Moderator
    (Lee Enfield Forum)


    tbonesmith's Avatar
    Join Date
    Sep 2007
    Last On
    04-05-2024 @ 02:42 AM
    Location
    Sydney, Australia
    Posts
    1,076
    Real Name
    Thomas Smith
    Local Date
    04-29-2024
    Local Time
    09:52 PM
    If you need a hand reproducing the original type of doors, send me a PM. Should be no worries.
    I think you'd be find for A and B storage. Wood is fine and three point locking can be 3 padlocks. I got my "alternative solution" for storage inspected and approved and the rule of thumb my police licenceing guys used..."is it more secure than a properly fixed (to the structure) light gauge high school locker with a 3 point lock" as that's the least secure commonly approved storage vessel. Your rack would murder that for security.

  14. Thank You to tbonesmith For This Useful Post:

    Son

+ Reply to Thread
Page 1 of 2 1 2 LastLast

Similar Threads

  1. Happy New Year
    By No4Mk1(T) in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 2
    Last Post: 01-02-2010, 01:55 PM
  2. What year did the M2 kit come out?
    By Curt in forum M1/M2 Carbine
    Replies: 5
    Last Post: 04-10-2009, 09:11 AM
  3. No.4 Savage Mk1* Year
    By TerryChambers in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 3
    Last Post: 03-27-2009, 07:35 AM
  4. Winnie of the year!!!
    By Bill Hollinger in forum M1 Garand/M14/M1A Rifles
    Replies: 3
    Last Post: 03-05-2009, 08:40 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts