+ Reply to Thread
Results 1 to 8 of 8

Thread: Proper Storage to Protect Spring Tension

Click here to increase the font size Click here to reduce the font size
  1. #1
    FREE MEMBER
    NO Posting or PM's Allowed
    pcaru1's Avatar
    Join Date
    Apr 2010
    Last On
    12-07-2018 @ 11:22 AM
    Location
    Somewherein,Ct
    Posts
    178
    Local Date
    04-30-2024
    Local Time
    02:51 PM

    Proper Storage to Protect Spring Tension

    Would the proper way to store my "03" rifles be with the bolt open or bolt closed and the trigger pulled? I'm trying to save the spring life. I do not want to have any more tension than needed on a 90+ year old striker spring. Also are there any other springs that are under tension that can be relieved to help protect them? Thanks in advance to all comments.
    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.

  2. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Location
    Milsurps.Com
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  3. #2
    Advisory Panel John Beard's Avatar
    Join Date
    Oct 2008
    Last On
    Yesterday @ 10:34 PM
    Location
    Sweet Home Alabama
    Posts
    1,064
    Local Date
    04-30-2024
    Local Time
    02:51 PM
    For spring tension purposes, the best way to store your rifle is with the striker down, magazine empty, and trigger released.

    Hope this helps.

    J.B.

  4. Avoid Ads - Become a Contributing Member - Click HERE
  5. #3
    Legacy Member Emri's Avatar
    Join Date
    Mar 2009
    Last On
    03-10-2022 @ 09:10 AM
    Location
    Alabama Gulf Coast
    Posts
    479
    Local Date
    04-30-2024
    Local Time
    01:51 PM
    Quote Originally Posted by John Beardicon View Post
    For spring tension purposes, the best way to store your rifle is with the striker down, magazine empty, and trigger released.

    Hope this helps.

    J.B.

    To add to John's statement; Do NOT dry-fire; with the bolt open, just hold back on the trigger and close the bolt. That will release tension on the mainspring without doing any possible damage to other parts.

    HTH,

    Emri

  6. The Following 2 Members Say Thank You to Emri For This Useful Post:


  7. #4
    FREE MEMBER
    NO Posting or PM's Allowed
    Doug Rammel's Avatar
    Join Date
    Mar 2009
    Last On
    01-15-2015 @ 11:22 PM
    Location
    SW Ohio
    Posts
    141
    Local Date
    04-30-2024
    Local Time
    02:51 PM
    I close the bolt and then hold the cocking piece. Pull the trigger and slooowly let the cocking piece move to an uncocked position.

  8. #5
    FREE MEMBER
    NO Posting or PM's Allowed
    pcaru1's Avatar
    Join Date
    Apr 2010
    Last On
    12-07-2018 @ 11:22 AM
    Location
    Somewherein,Ct
    Posts
    178
    Local Date
    04-30-2024
    Local Time
    02:51 PM
    Thread Starter
    Thanks for all the help people!

  9. #6
    Legacy Member Emri's Avatar
    Join Date
    Mar 2009
    Last On
    03-10-2022 @ 09:10 AM
    Location
    Alabama Gulf Coast
    Posts
    479
    Local Date
    04-30-2024
    Local Time
    01:51 PM
    Quote Originally Posted by Doug Rammel View Post
    I close the bolt and then hold the cocking piece. Pull the trigger and slooowly let the cocking piece move to an uncocked position.
    Yes, that works just fine. UNLESS you have oily fingers like I have most of the time !! Don't let it slip !! I also deal with mostly modern sporting arms and the don't have anything to grasp. Either method will work well.

    FWIW,

    Emri

  10. #7
    FREE MEMBER
    NO Posting or PM's Allowed
    Doug Rammel's Avatar
    Join Date
    Mar 2009
    Last On
    01-15-2015 @ 11:22 PM
    Location
    SW Ohio
    Posts
    141
    Local Date
    04-30-2024
    Local Time
    02:51 PM
    Ermi

    The OP asked about an 03 not a modern sporting rifle.

  11. #8
    Legacy Member Mike D's Avatar
    Join Date
    Nov 2009
    Last On
    03-25-2024 @ 07:18 PM
    Location
    South Carolina
    Age
    48
    Posts
    825
    Local Date
    04-30-2024
    Local Time
    03:51 PM
    With the bolt in the "closed" position there is more pressure on the mainspring than when it is merely "open". Therefore, the way that Emri suggested to close the bolt, will provide less "wear" on the spring.

    If your worried about spring tension wear, just disassemble the bolt! Just kidding, because then you would'nt be ready to blast somebody!

+ Reply to Thread

Similar Threads

  1. storage
    By rice 123 in forum 1911/1911A1 Service Pistol
    Replies: 4
    Last Post: 04-07-2011, 11:11 AM
  2. Gun Storage Tips
    By Newsfeed Hound in forum The Watering Hole OT (Off Topic) Forum
    Replies: 0
    Last Post: 01-12-2011, 09:10 PM
  3. Storage of Lee Enfields / Milsurps
    By newcastle in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 13
    Last Post: 09-18-2010, 02:55 AM
  4. Slide Spring Housing (Spring Tube)
    By JimF4M1s (Deceased) in forum M1/M2 Carbine
    Replies: 0
    Last Post: 11-19-2009, 12:36 AM
  5. Neck Tension on 5.56 GI Brass
    By Bat Guano in forum Ammunition and Reloading for Old Milsurps
    Replies: 6
    Last Post: 03-30-2009, 04:53 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts