My Gunshow AFourgery

**crazycossack** · 02-10-2012 01:58 PM

I found the following at a gunshow, it had the Redfield base already installed. Its a two groove Remington barrel and Remington receiver.

Here are the before and after photos.

Attachment 30813 Attachment 30806 Attachment 30805 Attachment 30808 Attachment 30810 Attachment 30811 Attachment 30812

Information

Warning: This is a relatively older thread
This discussion is older than 360 days. Some information contained in it may no longer be current.

**Highly Recommended** · 02-10-2012 01:58 PM

A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered. Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping. In the USA shipping is $5.00 for media mail. I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!). CLICK BANNER to send me a PM for International pricing and shipping.

Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles.

Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons

Specializing in premium ammunition and reloading components.

Your source for the finest in High Power Competition Gear.

Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.

**PeteDavis** · 02-10-2012 02:43 PM

Bolt cutout? Here's mine

**PeteDavis** · 02-10-2012 06:28 PM

Both of mine still have the front sights.

**crazycossack** · 02-10-2012 10:16 PM

Minimum cut out for the bolt I got from OWS as compared to the original on my other one. I'll take a pic tomorrow.

Taking the front sight off isn't too hard. Soak it in PB blaster for about a week and drive out the pin with a short stout punch and then drive off the sight with a big hammer. Its strange the first one I did was parked underneath the FS the second wasn't

Thread: My Gunshow AFourgery

Thread Tools

Search Thread

Display

My Gunshow AFourgery

Similar Threads

Phoenix Gunshow/ M1C

Md Gunshow

Went to Gunshow Yesterday

Gus! Richmond VA Gunshow?

Tags for this Thread

Posting Permissions