+ Reply to Thread
Page 1 of 3 1 2 3 LastLast
Results 1 to 10 of 22

Thread: No4 T Rebuild

Click here to increase the font size Click here to reduce the font size
  1. #1
    FREE MEMBER
    NO Posting or PM's Allowed
    PScott's Avatar
    Join Date
    Aug 2012
    Last On
    08-31-2016 @ 05:47 AM
    Location
    Australia
    Posts
    40
    Local Date
    04-27-2024
    Local Time
    04:15 AM

    No4 T Rebuild

    Hi, I have had an original No4T Barrelled action for a while with the intent on one day building it into a working rifle.

    Over the last months i obtained all the components needed to assemble the rifle....action parts, NOS woodwork, reproduction No32 Scope and mount, ...

    I stripped the action removed all the old finish and corrosion using a product called "Evapo rust"......

    I fitted the action to the woodwork..... then fitted the trigger components and set up the trigger ......it ended up a better trigger than my original BSA No4T...

    Before finishing the stock and metal work , i assembled everything and did some range testing with the Repro No32......... all went well....initial groups at 100mtrs were around 1 MOA..... The repro scope actually performed very well.

    All metal parts were then phosphated.. and the rifle assembled......

    Even though it is a "bits" rifle, i am very happy with the results.... my opinion is it is better in this "non orginal" configuration where it can be used and enjoyed than put away somewhere to deteriorate over time..

    Some pics of the Rebuilt No4T and also along side my original all matching No4T..

    Hope you like...
    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.

  2. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Location
    Milsurps.Com
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  3. #2
    FREE MEMBER
    NO Posting or PM's Allowed
    CHAPUISARMES's Avatar
    Join Date
    Nov 2012
    Last On
    06-19-2017 @ 07:23 PM
    Location
    Dubbo, NSW Australia
    Posts
    4
    Local Date
    04-27-2024
    Local Time
    04:15 AM
    Hi Mr Scott,

    You have done well and although not an original you have saved a bit of the past and are enjoying using it.

    Well done,

    Cheers for now,

    Jeff Gray

  4. Avoid Ads - Become a Contributing Member - Click HERE
  5. #3
    Advisory Panel Surpmil's Avatar
    Join Date
    Feb 2008
    Last On
    @
    Location
    West side
    Posts
    4,700
    Local Date
    04-26-2024
    Local Time
    11:15 AM
    Nicely done. Not entirely authentic, but not pretending to be. The experience of shooting it will be quite authentic though.
    “There are invisible rulers who control the destinies of millions. It is not generally realized to what extent the words and actions of our most influential public men are dictated by shrewd persons operating behind the scenes.”

    Edward Bernays, 1928

    Much changes, much remains the same.

  6. #4
    Advisory Panel
    Roger Payne's Avatar
    Join Date
    Mar 2008
    Last On
    Today @ 01:45 PM
    Location
    Sutton Coldfield, UK.
    Posts
    3,440
    Real Name
    Roger Payne
    Local Date
    04-26-2024
    Local Time
    07:15 PM
    You've done a lovely job of it. I'd give it house room!

    ATB

  7. #5
    Advisory Panel
    Peter Laidler's Avatar
    Join Date
    Jul 2008
    Last On
    04-13-2024 @ 05:00 AM
    Location
    Abingdon, Oxfordshire. The home of MG Cars
    Posts
    16,510
    Real Name
    Peter Laidler
    Local Date
    04-26-2024
    Local Time
    07:15 PM
    There are some interesting comments somewhere on this forum about the problems you might encounter with your repop No32 telescope. There are some that they say are pretty well insurmountable so the next bit of advioce would have to be just look after it.

    You could ask Brian at BDLLtd for a set of brand new leather eye caps

  8. #6
    Deceased January 15th, 2016 Beerhunter's Avatar
    Join Date
    Dec 2007
    Last On
    01-02-2016 @ 04:03 PM
    Location
    Hampshire, England
    Posts
    1,181
    Local Date
    04-26-2024
    Local Time
    06:15 PM
    Quote Originally Posted by Peter Laidlericon View Post
    You could ask Brian at BDLLtd for a set of brand new leather eye caps
    I have found that a Schweppes tonic water bottle (large) top and a plastic milk bottle (2 litre) top work well if one carves the thread out of them. They can be left in their original jolly colours of grey and green (semi-skimmed) respectively or painted black (as i have done) to match the telescope.

    If one just will not stump up the silly money for a tin box for one's No.32, a metal cigarette box (200 size) found in lots of Duty Free outlets world-wide works well if suitable padded. Mine used to contain Germanicon "West" cigarettes but other brands would be suitable.
    Last edited by Beerhunter; 11-24-2012 at 11:05 AM.

  9. #7
    Advisory Panel
    Peter Laidler's Avatar
    Join Date
    Jul 2008
    Last On
    04-13-2024 @ 05:00 AM
    Location
    Abingdon, Oxfordshire. The home of MG Cars
    Posts
    16,510
    Real Name
    Peter Laidler
    Local Date
    04-26-2024
    Local Time
    07:15 PM
    Surely beery, sets of eye caps aren't so expensive to warrant milk bottle tops are they? The best container that I've found so far is the tough polythene trip flare tube. Air and watertight end caps, come in khaki green or black that you can line inside with an old roll-mat or close density foam and it'll hold the telescope and bracket tight and secure. All from the dozy tech. storemans skip!

  10. #8
    Deceased January 15th, 2016 Beerhunter's Avatar
    Join Date
    Dec 2007
    Last On
    01-02-2016 @ 04:03 PM
    Location
    Hampshire, England
    Posts
    1,181
    Local Date
    04-26-2024
    Local Time
    06:15 PM
    Quote Originally Posted by Peter Laidlericon View Post
    Surely beery, sets of eye caps aren't so expensive to warrant milk bottle tops are they?
    Can't afford to waste money what with beerhunting not being a cheap hobby. Seriously as is often the case, the bottle tops were to hand and they do the job so well I've never bothered to upgrade.

    The best I ever got out of a skip was an ultrasonic bath. All in working order including the heater. Still have it and use it.

    Trip flares must come in a different box than in my day. I used to hate the bloody things and I was a sapper!
    Last edited by Beerhunter; 11-24-2012 at 12:47 PM.

  11. #9
    FREE MEMBER
    NO Posting or PM's Allowed
    PScott's Avatar
    Join Date
    Aug 2012
    Last On
    08-31-2016 @ 05:47 AM
    Location
    Australia
    Posts
    40
    Local Date
    04-27-2024
    Local Time
    04:15 AM
    Thread Starter
    The repro No32...... i read vast amounts of info before purchasing, some good some bad. I decided to take the gamble on it.

    So far it has been excellent, very nice optics... and it tracks and hold true. Time will tell i supose , but for the moment very happy with it.

    So far i have shot at 100 and 200mtrs...... next weekend i will be trying it at 500mtrs...

  12. #10
    Advisory Panel

    jmoore's Avatar
    Join Date
    Mar 2009
    Last On
    06-09-2023 @ 04:20 AM
    Location
    US of A
    Posts
    7,066
    Local Date
    04-26-2024
    Local Time
    02:15 PM
    Looks like a great "no guilt" rifle that can be shot extensively without worry. Looking forward to the report on the results at 500m.

+ Reply to Thread
Page 1 of 3 1 2 3 LastLast

Similar Threads

  1. No4 Mk1 T Rebuild
    By tbonesmith in forum The Restorer's Corner
    Replies: 69
    Last Post: 02-25-2012, 02:28 AM
  2. New to me Std. Prd. RIA/EB rebuild
    By padre in forum M1/M2 Carbine
    Replies: 1
    Last Post: 07-12-2011, 07:16 AM
  3. To rebuild or not?
    By tbonesmith in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 3
    Last Post: 06-19-2011, 06:25 AM
  4. No4 Mk1 T Rebuild
    By tbonesmith in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 57
    Last Post: 12-29-2010, 07:40 AM
  5. SVT 40 rebuild
    By sdh1911 in forum Soviet Bloc Rifles
    Replies: 0
    Last Post: 05-25-2010, 08:16 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts