+ Reply to Thread
Page 1 of 2 1 2 LastLast
Results 1 to 10 of 11

Thread: Carbine accessory

Click here to increase the font size Click here to reduce the font size
  1. #1
    FREE MEMBER
    NO Posting or PM's Allowed
    Jerome Cooper's Avatar
    Join Date
    Mar 2009
    Last On
    09-26-2014 @ 11:04 PM
    Posts
    55
    Local Date
    04-29-2024
    Local Time
    03:07 PM

    Carbine accessory

    I recently purchased an M-1 Carbine and with it came an attachment that I never heard of or seen before. It is a (roughly) rectangular shaped piece of metal attached to two rods and it fits over the frame/bridge behind the bolt. When in place it acts as a deflector for fired cases that are being ejected. Is this an after market item or was it developed by government and issued as a standard item intended to be used with every carbine. It works fine and keeps the spent casings from flying in all directions, but it does get in the way if trying to use stripper clips. Was I fortunate to have gotten it with the rifle or is it a hard to find item. Thanks for any info. J. Cooper
    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.

  2. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  3. #2
    FREE MEMBER
    NO Posting or PM's Allowed
    bonnoughj's Avatar
    Join Date
    Dec 2012
    Last On
    09-20-2015 @ 03:47 PM
    Location
    Ohio
    Posts
    29
    Local Date
    04-29-2024
    Local Time
    02:07 PM
    Any pics?

  4. Avoid Ads - Become a Contributing Member - Click HERE
  5. #3
    Legacy Member imarangemaster's Avatar
    Join Date
    Mar 2009
    Last On
    09-19-2023 @ 12:24 AM
    Location
    Northern California
    Posts
    3,308
    Local Date
    04-29-2024
    Local Time
    02:07 PM
    It is a brass deflector. IIRC, it was to be used with M3 sniper scopes to protect the tube. I could be wrong, but that is what I heard a long time ago. Maybe Bill knows.

    Mr. Ricca, can you help us out????

  6. #4
    Moderator
    (Deceased Nov 16th, 2019)

    JimF4M1s (Deceased)'s Avatar
    Join Date
    Mar 2009
    Last On
    01-14-2023 @ 10:08 PM
    Location
    USA
    Age
    74
    Posts
    3,439
    Local Date
    04-29-2024
    Local Time
    12:07 PM
    Jerome,

    Are you talking about one of these?



  7. #5
    Legacy Member INLAND44's Avatar
    Join Date
    Mar 2009
    Last On
    04-23-2022 @ 07:42 PM
    Location
    VA
    Posts
    1,134
    Local Date
    04-29-2024
    Local Time
    03:07 PM
    It's a deflector that may have been designed for use with the late scoped carbines. I have also seen them packaged with blank adapters. Funny thing is, the U.S. never issued blank adapters. I understand that the ones you find are all non-G.I. Even funnier, I have no idea why you would need the brass deflector just because you're shooting blanks. I have shot blanks using one of those adapters and it came with a deflector. I tried it but it was no problem without it. I used the blank adapter on June 6, 1994 in the reenactment of D-Day at Virginia Beach. I'm not a reenactor but got talked into it. So I did it once and that was plenty. I liked playing Army as a kid, but as an adult, it seemed inane. I went along with it though, because after all there were thousands of spectators there not to mention the 'Germans', who were great! For example, I was 'pinned down' behind something and was firing around it. I rolled over to get a mag out and reload, when a 'medic' comes running over and says 'Are you hit?' to which I replied 'Hell, no, I'm just trying to reload!'. Poor guy was just playing the part. Funny, I couldn't even hear the carbine firing, because the Garandicon guys were using hi-power blanks that needed no adapter. I thought at the time that was excessively dangerous - people do make mistakes. Well, the Germans were doing the same thing, including the MG42s, so I guess it was okay.

  8. #6
    Advisory Panel
    USGI's Avatar
    Join Date
    Mar 2009
    Last On
    @
    Location
    Oregon, USA
    Age
    78
    Posts
    2,191
    Real Name
    Bob
    Local Date
    04-29-2024
    Local Time
    12:07 PM
    A vendor at the Portland gun shows has these and told me they are Dutch and used with their BFA's. He said the blank shell casings sometimes eject different than standard ammo and the purpose is to prevent the operator from receiving burns from the hot brass. - Bob

    PS. The OP seems to imply that you can use stripper clips to reload with the magazine in the carbine. I never thought of trying that - can you?

  9. #7
    Advisory Panel browningautorifle's Avatar
    Join Date
    Jul 2008
    Last On
    Today @ 11:48 AM
    Location
    Victoria BC
    Posts
    29,948
    Real Name
    Jim
    Local Date
    04-29-2024
    Local Time
    12:07 PM
    Quote Originally Posted by USGI View Post
    you can use stripper clips to reload with the magazine in the carbine
    No you can't.
    Regards, Jim

  10. #8
    Advisory Panel
    USGI's Avatar
    Join Date
    Mar 2009
    Last On
    @
    Location
    Oregon, USA
    Age
    78
    Posts
    2,191
    Real Name
    Bob
    Local Date
    04-29-2024
    Local Time
    12:07 PM
    Saved me from having to go try it! - Bob

  11. #9
    FREE MEMBER
    NO Posting or PM's Allowed
    Sarge's Avatar
    Join Date
    Mar 2009
    Last On
    04-16-2018 @ 03:38 AM
    Location
    Colorado
    Age
    88
    Posts
    580
    Local Date
    04-29-2024
    Local Time
    01:07 PM
    It is, as said, a brass deflector - for the West Germanicon blank adapter. It is made for the later adjustable rear sight, will not work with the early flip sight. Has Nothing to do with the M3 snooper scope. Both the German black plastik blanks and the Norwegianicon red plastik blanks tended to spit gas/burning powder residue back into the shooters face, thus the shield. The red blanks were the worst of the 2.
    If you save your fired cases it is a very handi gadget to have as it dorps the cases almost at your feet.
    Sarge

  12. #10
    FREE MEMBER
    NO Posting or PM's Allowed
    Pascal Maufort's Avatar
    Join Date
    Jan 2013
    Last On
    05-09-2017 @ 11:19 AM
    Location
    Belgium, Europe
    Posts
    14
    Local Date
    04-29-2024
    Local Time
    02:07 PM

    Exclamation m1 carbine rear sight tool

    Hello,
    I am looking for m1 carbine rear sight removal and install tool.
    I saw at Fulton-Armory., Sarco. inc., Northridge. inc., Gunparts.com.
    I sent several emails since early January, but no response.
    Could someone give me an address where I could order?
    I also saw in Daily Nick on ebay, but it does not deliver in Belgiumicon.
    Thank you all for your help.

    Pascal Maufort

+ Reply to Thread
Page 1 of 2 1 2 LastLast

Similar Threads

  1. Another possibly useless Bren Accessory
    By boltaction in forum The Bren LMG (Light Machine Gun)
    Replies: 23
    Last Post: 12-31-2011, 05:50 AM
  2. Most forgoten accessory for K-31
    By cuerno de chivo in forum Swiss Rifles
    Replies: 4
    Last Post: 11-01-2011, 08:11 AM
  3. M14A1 Accessory Pouch
    By The Wizard in forum M1 Garand/M14/M1A Rifles
    Replies: 0
    Last Post: 02-28-2011, 09:16 AM
  4. Ultimate L42 accessory
    By Peter Laidler in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 13
    Last Post: 04-07-2009, 11:24 PM
  5. Replies: 0
    Last Post: 10-10-2006, 02:10 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts