+ Reply to Thread
Results 1 to 3 of 3

Thread: .U. marked flip base

Click here to increase the font size Click here to reduce the font size
  1. #1
    Advisory Panel
    painter777's Avatar
    Join Date
    Mar 2009
    Last On
    @
    Location
    Central Michigan
    Posts
    5,322
    Local Date
    04-28-2024
    Local Time
    11:14 AM

    .U. marked flip base

    I know some of you have seen this.
    But seeing that there are members here that were not part of the CSPicon crowd, I wanted to post this picture of a flip sight base I bought.
    It was one of 3 bases that I found in a dealers junk box at a small local show. It wasn't until after cleaning the crud out of it that I noticed the .U. stamping.
    Anyone care to pull their flip sight apart to look inside?
    Yea....I didn't think so.
    No telling how many may have been marked.

    Regards
    Charlie-painter777

    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.

  2. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Location
    Milsurps.Com
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  3. #2
    Advisory Panel
    painter777's Avatar
    Join Date
    Mar 2009
    Last On
    @
    Location
    Central Michigan
    Posts
    5,322
    Local Date
    04-28-2024
    Local Time
    11:14 AM
    Thread Starter
    Here's the "S" marking on it.
    It's the one on the left.

    Charlie-painter777


  4. Avoid Ads - Become a Contributing Member - Click HERE
  5. #3
    Advisory Panel
    painter777's Avatar
    Join Date
    Mar 2009
    Last On
    @
    Location
    Central Michigan
    Posts
    5,322
    Local Date
    04-28-2024
    Local Time
    11:14 AM
    Thread Starter

    Some Thoughts for the day...

    I received a note from a fellow CC member that in CC Newsletter #112 there is a spotters report of a Flip Sight Base marked with a .U. on the bottom of it. I don't have all the News Letters. Hopefully one day I can buy up the back issues.

    If the spotters report is correct, then Underwood marked some (all ? ) bases on the bottom or inside. Most if not all of their leafs were also marked with the .U.

    Were both the base and leaf marked with the .U. because these were seperate parts?
    Are all the Underwood bases marked?

    Only way to know would be to knock the leaf off...I doubt many would do that.
    Underwood was known to supply both Flip Sight leafs and Bases to Inland.
    Is it possible that bases made to be passed on were marked inside or on the bottom?
    War Baby on page 358 states that Underwood supplied to Inland the following:
    12-28-43......4000 Rear Sight Leafs
    4-3-44.........5394 Rear Sight Leafs
    4-3-44.........2233 Rear Sight Assemblies

    I own a Inland 5,061,238 with barrel date of 3-44. This carbine has a .U. marked leaf on it. So these parts were given to Inland just prior to or about the time that this one was assembled. That's the one when we were painting the new Michigan State Forensic Lab that I had a Technician examine under a micro scope thingy before they were open for business. He could see that the base of the metal between the dovetails was 'PUSHED' in only one direction....from right to left. I'm confident that Flip Sight is original to that carbine.
    BUT....Is the Base Marked with a .U. ???
    One day IF I ever start drinking again......I'm gonna knock that pin off and see for myself......I swear.

    A MEMORIAL WEEKEND TO ALL !!
    Charlie-painter777





  6. Thank You to painter777 For This Useful Post:


+ Reply to Thread

Similar Threads

  1. Removing the front sight base on a Ross Mk III
    By Cantom in forum Gunsmithing for Old Milsurps
    Replies: 8
    Last Post: 10-19-2020, 04:01 PM
  2. I'm ready to flip a coin. Can't make the plunge.
    By MJ1 in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 4
    Last Post: 07-06-2008, 10:15 AM
  3. Anyone have a K98k rear sight base spring lieing around?
    By Skippy in forum Milsurps General Discussion Forum
    Replies: 5
    Last Post: 08-04-2007, 12:03 AM
  4. Target MP Long Branch with front sight base on backwards?
    By Cantom in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 6
    Last Post: 03-30-2007, 07:34 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts