+ Reply to Thread
Results 1 to 9 of 9

Thread: Decided on a 1954 M1 Garand (CMP Correct Excellent)

Click here to increase the font size Click here to reduce the font size
  1. #1
    Legacy Member lkgmadmax's Avatar
    Join Date
    Apr 2014
    Last On
    04-25-2024 @ 09:29 AM
    Location
    Central NC
    Posts
    116
    Local Date
    04-27-2024
    Local Time
    05:25 AM

    Decided on a 1954 M1 Garand (CMP Correct Excellent)

    Well I appreciate all of the help offered up earlier regarding the WWII 1944; I decided to go in a different direction. I may still pursue a WWII M1icon later.

    I found a 1954 CMPicon "Correct Grade Excellent” that was purchased by a fellow a few years ago, comes with all the paperwork. He said at the time he visited the store and they had a rack of 20, he looked over each one and selected the best they had at the time in his opinion. After getting it home and removing some of the grease he decided that the rifle may have possibly never been fired and since it was still in the grease, he decided to store this one away due to it being better suited in his opinion for collecting instead of an everyday shooter. He returned to the store and selected a field grade for shooting. He recently decided to put this one up for sale, I saw it, liked it and we were able to reach an agreement we were both happy with.

    https://plus.google.com/photos/11044...CJPi4Ij6kNrPEQ

    One I receive it and get it cleaned up I’ll have a photo shoot and post some of my pictures.

    Thanks again for all of the help!
    -David
    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.

  2. The Following 2 Members Say Thank You to lkgmadmax For This Useful Post:


  3. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Location
    Milsurps.Com
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  4. #2
    Advisory Panel browningautorifle's Avatar
    Join Date
    Jul 2008
    Last On
    Today @ 12:36 AM
    Location
    Victoria BC
    Posts
    29,943
    Real Name
    Jim
    Local Date
    04-27-2024
    Local Time
    02:25 AM
    Nice clean rifle...
    Regards, Jim

  5. Thank You to browningautorifle For This Useful Post:


  6. Avoid Ads - Become a Contributing Member - Click HERE
  7. #3
    Contributing Member Sarge1998's Avatar
    Join Date
    May 2010
    Last On
    03-13-2024 @ 08:13 PM
    Location
    Northern Illinois
    Posts
    577
    Real Name
    Joseph Budde
    Local Date
    04-27-2024
    Local Time
    04:25 AM
    My HRA Correct Grade also came covered with grease, it was not unfired but gauged very close. Here is the current Correct Grade description at CMPicon. Now they are available by auction only.

    CORRECT GRADE: (Very Good to Excellent)
    AVAILABLE ON THE CMP AUCTION SITE ONLY
    Correct Grade Rifles are similar to the Service Grade (above), but will show less wear and use. Correct Grade rifles will have all correct parts for the date of manufacture with 80% or better overall original metal finish. The stock and handguards will be of walnut and correct for the rifle but will have some dings, dents, scratches and marring of the wood finish. Stocks will have the appropriate original inspector's cartouche. The rifle bore will be very good with no significant defects and with a throat erosion of less than 4 and a muzzle wear of 2 or less. Very good to excellent condition. This grade is rare and is only available occasionally in limited quantities. Because of the scarcity of these rifles, they will only be sold on the CMP auction site at cmpauction.thecmp.org.

  8. Thank You to Sarge1998 For This Useful Post:


  9. #4
    Legacy Member Joe W's Avatar
    Join Date
    Mar 2009
    Last On
    07-20-2021 @ 09:25 PM
    Location
    S.W. Florida
    Posts
    720
    Local Date
    04-27-2024
    Local Time
    05:25 AM
    Very nice. Are you going to clean it or leave it with the grease ??

  10. #5
    Legacy Member lkgmadmax's Avatar
    Join Date
    Apr 2014
    Last On
    04-25-2024 @ 09:29 AM
    Location
    Central NC
    Posts
    116
    Local Date
    04-27-2024
    Local Time
    05:25 AM
    Thread Starter
    Thanks guys!

  11. #6
    Legacy Member Orlando's Avatar
    Join Date
    Mar 2009
    Last On
    01-23-2024 @ 05:01 AM
    Location
    Ohio
    Posts
    325
    Local Date
    04-27-2024
    Local Time
    04:25 AM
    Correct grades were fired or they would have been sold as unissued, CMPicon doesnt leave that kind of money on the table. All of my Correct Grades came in same condition as yours in protective grease. They were done this way for long term storage.
    Nice loking Garandicon, should make a fine shooter

  12. Thank You to Orlando For This Useful Post:


  13. #7
    Legacy Member lkgmadmax's Avatar
    Join Date
    Apr 2014
    Last On
    04-25-2024 @ 09:29 AM
    Location
    Central NC
    Posts
    116
    Local Date
    04-27-2024
    Local Time
    05:25 AM
    Thread Starter
    Quote Originally Posted by Joe W View Post
    Very nice. Are you going to clean it or leave it with the grease ??
    Thanks Joe, cleaning her up.

  14. #8
    Legacy Member Neal Myers's Avatar
    Join Date
    Mar 2009
    Last On
    06-07-2023 @ 08:25 PM
    Posts
    474
    Local Date
    04-27-2024
    Local Time
    05:25 AM
    All CMPicon rifles are sorted & graded by their staff. Their armorers evaluate the better rifles. A rifle in really good condition with all original parts could be classified as "collector grade". But, sometimes the armorer finds a rifle that is in really good condition that has had some parts replaced, but he is able to swap the replacement parts for those that would have been on the rifle originally. It would be less than honest to call such a rifle "collector grade", but "correct grade" accurately describes such a rifle.

    Since it was improbably that anyone in the military would swap out parts on an unissued rifle, we can be sure that all "correct grade" rifles were issued. We have no way of knowing whether or not they were actually fired.

    Neal

  15. Thank You to Neal Myers For This Useful Post:


  16. #9
    Contributing Member Bob Seijas's Avatar
    Join Date
    Mar 2009
    Last On
    Yesterday @ 09:24 PM
    Location
    Montville, NJ and Delray Beach, FL
    Posts
    2,223
    Real Name
    Bob Seijas
    Local Date
    04-27-2024
    Local Time
    05:25 AM

    Replaced

    "Since it was improbably that anyone in the military would swap out parts on an unissued rifle, we can be sure that all "correct grade" rifles were issued."

    Orest told us that a guy bought a slug of new HRAs that had some original SA parts... he sent them all back to have the correct SA parts replaced with HRA so they would look right. No argument would talk him out of it, so CMPicon did it.
    Real men measure once and cut.

  17. Thank You to Bob Seijas For This Useful Post:


+ Reply to Thread

Similar Threads

  1. SA M1 Garand USGI 1954 Correct Parts
    By Bizio in forum M1 Garand/M14/M1A Rifles
    Replies: 3
    Last Post: 03-09-2013, 09:04 AM
  2. USRIFLECAL30M1.com (Excellent Garand Web Site)
    By Badger in forum M1 Garand/M14/M1A Rifles
    Replies: 0
    Last Post: 10-04-2012, 06:37 AM
  3. 12-212 Garand Picture of the Day - Normandy 1954
    By Mark in Rochester in forum M1 Garand/M14/M1A Picture of the Day Forum
    Replies: 0
    Last Post: 07-30-2012, 12:19 PM
  4. M1 Garand Armory (Excellent Garand Web Site)
    By Badger in forum M1 Garand/M14/M1A Rifles
    Replies: 0
    Last Post: 01-01-2010, 07:56 AM
  5. "Hellfire" is an excellent name for it. Excellent video.
    By Louis of PA in forum The Watering Hole OT (Off Topic) Forum
    Replies: 0
    Last Post: 07-11-2009, 10:17 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts