+ Reply to Thread
Page 1 of 2 1 2 LastLast
Results 1 to 10 of 19

Thread: Inglis High Power Serial Number - I'm stumped

Click here to increase the font size Click here to reduce the font size
  1. #1
    FREE MEMBER
    NO Posting or PM's Allowed
    410001661's Avatar
    Join Date
    Dec 2014
    Last On
    03-20-2015 @ 08:09 AM
    Location
    Burlington, Ontario
    Posts
    2
    Local Date
    04-27-2024
    Local Time
    06:39 PM

    Inglis High Power Serial Number - I'm stumped

    Hi all,
    I have a neat Inglis Hi Power made in Toronto, Ontario with all matching (slide/bbl/frame) serial numbers that are 87x.......I have never seen one with a 3 digit serial number? I have looked high and low and cannot find anything about it.

    On the left side of the gun it says Browning - F.N. 9mm H.P INGLIS CANADA
    On the right side of the gun is just the serial number stamped almost in line with each other on the bbl, the slide, and the frame

    Here are some pics



    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.

  2. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Location
    Milsurps.Com
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  3. #2
    Legacy Member Paul S.'s Avatar
    Join Date
    Mar 2009
    Last On
    04-08-2020 @ 06:58 PM
    Location
    Back and forth between Sydney and Southern California
    Posts
    1,594
    Local Date
    04-27-2024
    Local Time
    05:39 PM
    Can you take some close-up pictures of the proofmarks on the frame and slide and tell me whether the serial number has 'CH', 'T' or no letter in it?

  4. Avoid Ads - Become a Contributing Member - Click HERE
  5. #3
    Advisory Panel browningautorifle's Avatar
    Join Date
    Jul 2008
    Last On
    Today @ 01:54 PM
    Location
    Victoria BC
    Posts
    29,943
    Real Name
    Jim
    Local Date
    04-27-2024
    Local Time
    03:39 PM
    I had a 3 digit gun, but it had a prefix. Mine was a 0T8XX, don't remember the whole number. Yes, we need a close up, preferably not a phone pic...
    Regards, Jim

  6. #4
    Advisory Panel Brian Dick's Avatar
    Join Date
    Apr 2008
    Last On
    Today @ 05:44 PM
    Location
    Edgefield, SC USA
    Posts
    4,049
    Local Date
    04-27-2024
    Local Time
    06:39 PM
    Might be a "lunch box" pistol. Assembled by a factory worker at home, (or later out of nos parts), with a non-standard serial number applied for registration purposes. They are out there and you aren't that far from where they were produced during the war.

  7. #5
    FREE MEMBER
    NO Posting or PM's Allowed
    Steve1987's Avatar
    Join Date
    Aug 2010
    Last On
    11-25-2016 @ 06:01 PM
    Location
    Ottawa, Ont.
    Posts
    26
    Local Date
    04-27-2024
    Local Time
    05:39 PM
    All original phosphate Inglis's would have had the serial number applied in the white.

    It's possible someone modified the serial number and re-finished the pistol, but without close up pictures it's not possible to say for sure. We do know it was refinished at some point, by either the factory (some were upgraded to Mk 1* and refinished) military arsenal, or outside of the military.

    Regards,
    -Steve

  8. #6
    FREE MEMBER
    NO Posting or PM's Allowed
    410001661's Avatar
    Join Date
    Dec 2014
    Last On
    03-20-2015 @ 08:09 AM
    Location
    Burlington, Ontario
    Posts
    2
    Local Date
    04-27-2024
    Local Time
    06:39 PM
    Thread Starter
    Quote Originally Posted by Paul S. View Post
    Can you take some close-up pictures of the proofmarks on the frame and slide and tell me whether the serial number has 'CH', 'T' or no letter in it?
    Paul,
    There are no markings on it what so ever.........no letter in the serial number just the 3 numbers. The only stamp I saw on it was on the bottom of the mag - looked like a T (maybe for Toronto)??

    Thanks in advance guys!!




  9. #7
    Advisory Panel browningautorifle's Avatar
    Join Date
    Jul 2008
    Last On
    Today @ 01:54 PM
    Location
    Victoria BC
    Posts
    29,943
    Real Name
    Jim
    Local Date
    04-27-2024
    Local Time
    03:39 PM
    That "T" is a JI for John Inglis. Looks like it might have been stolen from the factory and numbered later. I know handguns could be registered without problem for years, my great Uncle took his vet bringback in around 1965 and they papered it without question. This may have done the same. Nice gun.
    Last edited by browningautorifle; 01-20-2015 at 12:43 AM.
    Regards, Jim

  10. #8
    Legacy Member Paul S.'s Avatar
    Join Date
    Mar 2009
    Last On
    04-08-2020 @ 06:58 PM
    Location
    Back and forth between Sydney and Southern California
    Posts
    1,594
    Local Date
    04-27-2024
    Local Time
    05:39 PM
    A few observations:
    1. there should be, but aren't, Dominion of Canadaicon acceptance marks (a broad arrow inside a "C") on the right side (S/N side) of the frame;
    2. there should be, but isn't, a cross pennant marking of the barrel visible through the ejection port;
    3. the factory applied serial numbers were done using a pantograph which left very neat, evenly space, all on one plane, consistent-depth markings while your serial number is uneven, off-line and not consistent;
    4. there is no marking above the "BROWNING - FN 9MM HP" where the "MkI*", etc. stamping should be;
    5. and - significantly (or not) the cam lug is prick-punched to keep it in place in the frame.

    All the above, the last point in particular, makes me wonder who, when, and why that was done. One possible answer is also the most likely explanation. That is, as has been suggested earlier, the pistol was made from parts that "grew legs" or were poached from the factory before the S/N was applied and became accountable.

    I'm not a betting man, but if I was, I would take 10 to 1 odds on it being a "Lunch-box Special".

  11. The Following 3 Members Say Thank You to Paul S. For This Useful Post:


  12. #9
    FREE MEMBER
    NO Posting or PM's Allowed
    jonnyc's Avatar
    Join Date
    Sep 2008
    Last On
    Yesterday @ 05:54 AM
    Location
    PA, USA
    Posts
    653
    Local Date
    04-27-2024
    Local Time
    06:39 PM
    I generally don't believe in "Lunch Box" guns, but after seeing this one I may have to modify my stance. Sure fits the bill.

  13. #10
    Legacy Member lawrence_n's Avatar
    Join Date
    May 2008
    Last On
    04-25-2024 @ 03:40 PM
    Location
    Toronto, Canada
    Posts
    279
    Local Date
    04-27-2024
    Local Time
    06:39 PM
    Long Branch had a rifle team, I don't know if they had a pistol team. I'd agree on the "lunch box" special or, if they had a pistol team, a piece selected and tuned for those shooters. My brother bought a lovely 7.62 No.4 with a one-of-a-kind target rear sight. There are no military or DCRA stamps on the rifle, but from the condition and little clues on the rifle as well as some research, we've concluded that it was probably made for the rifle team. If only the pistol could talk!

+ Reply to Thread
Page 1 of 2 1 2 LastLast

Similar Threads

  1. Inglis High Power malfunction - part two
    By us019255 in forum Other Military Service Pistols and Revolvers
    Replies: 6
    Last Post: 07-31-2012, 10:52 AM
  2. End of Inglis High Power in British service?
    By enbloc8 in forum Other Military Service Pistols and Revolvers
    Replies: 6
    Last Post: 05-22-2012, 12:55 PM
  3. Inglis High Power malfunction
    By us019255 in forum Other Military Service Pistols and Revolvers
    Replies: 7
    Last Post: 10-28-2011, 02:00 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts