-
Legacy Member
Boys AT Rifle & SMLE
The Boys Anti tank rifle came out this weekend unfortunately the range is only limited to .22 so had to use the SMLE attachment...
Attachment 58800Attachment 58798Attachment 58799Attachment 58797
Information
|
Warning: This is a relatively older thread This discussion is older than 360 days. Some information contained in it may no longer be current. |
|
-
The Following 12 Members Say Thank You to Simon P For This Useful Post:
ArtioZen,
Beerhunter,
Brian B,
Brian Dick,
gsimmons,
KiwiLee,
Lance,
Peter Laidler,
rayg,
Ro-bert,
Roger Payne,
waco16
-
12-22-2014 03:00 PM
# ADS
Friends and Sponsors
-
Advisory Panel
Nice. Still the guys wouldn't see that too often. I'd probably make a sub cal cartridge that took a .50 basic brass cartridge and cast big 500 gr bullets for it...chamber ream would cost you but I think it would be worth it.
-
-
-
Legacy Member
Being a engineer & RFD I made up a replica of the .55" *** .22" CONVEYOR using an old Martini International barrel which was fun for a while.
Not sure why the asterix blocked out the name of the conveyor, probably looks like a rude word
-
Thank You to Simon P For This Useful Post:
-
Advisory Panel
Slightly off center bore I should think? That way the firing pin locates it? I'd make up a steel cartridge...several if feasible, and then get sweating... Still it sounds like quite a job to make a full size cartridge with a small lathe, no CNC machines on hand.
-
-
Legacy Member
Have a look at my pals website, it shows the adaptor which uses a firing plug so no issue with being off centre for the rim fire,
http://www.rifleman.org.uk/Enfield_B...Tank_Rifle.htm
Hopefully going to take it to Kynoch range to give it a test with some .55 practise ammo a RFD friend of mine acquired
Last edited by Simon P; 12-22-2014 at 05:40 PM.
Regards Simon
-
-
According to the pre war Inf Trg pamphlets, they could be fired on suitable 25m ranges!
-
-
Advisory Panel
Originally Posted by
Simon P
the adaptor uses a firing plug
Yes, That's the original. Nice catch. I have seen one of those around here too.
I guess one could also make an adaptor for .500 S&W ammo. That would give you a cartridge that's almost unmanageable in a revolver but would shoot like rimfire in this gun...
-
-
Legacy Member
Yes, That's the original. Nice catch. I have seen one of those around here too.
I guess one could also make an adaptor for .500 S&W ammo. That would give you a cartridge that's almost unmanageable in a revolver but would shoot like rimfire in this gun...
I never even considered that, sounds like a project for when I get a bit of free time, need to get the CIP standard and a chamber reamer ground up.......
-
-
Advisory Panel
Love to see the progress on that one. You can get dies for it too. Keep us in mind Simon...
-