+ Reply to Thread
Page 1 of 2 1 2 LastLast
Results 1 to 10 of 12

Thread: K98 Identification

Click here to increase the font size Click here to reduce the font size
  1. #1
    Legacy Member Bladerunner's Avatar
    Join Date
    Mar 2009
    Last On
    12-13-2022 @ 09:20 PM
    Location
    Ontario, Canada
    Posts
    32
    Local Date
    05-02-2024
    Local Time
    07:37 PM

    K98 Identification

    I hope someone can help me identify this K98 Mauser.

    I am looking for a sporterized K98kicon to return to military configuration. The one I have found, but not purchased yet has no markings other than a couple of 14's stamped on the barrel and trigger guard assembly. It is not drilled and tapped and the action appears in very good condition.

    What I'd like help identifying mostly is the bolt handle. It does not appear to be the sharp angled K98k handle, but one with a gentle curve. There also appears to be a flat on the inside of the bolt handle knob.

    Any ideas??

    Attachment 59180Attachment 59181Attachment 59182Attachment 59183Attachment 59184Attachment 59185Attachment 59186Attachment 59187
    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.

  2. Thank You to Bladerunner For This Useful Post:


  3. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Location
    Milsurps.Com
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  4. #2
    Legacy Member Anzac15's Avatar
    Join Date
    Jun 2011
    Last On
    03-08-2024 @ 11:09 PM
    Location
    Suwanee, Ga.
    Posts
    1,491
    Local Date
    05-02-2024
    Local Time
    06:37 PM
    I may be wrong, but it appears to be a heavily sporterized kar98, not a 98k.

  5. Avoid Ads - Become a Contributing Member - Click HERE
  6. #3
    Legacy Member Bladerunner's Avatar
    Join Date
    Mar 2009
    Last On
    12-13-2022 @ 09:20 PM
    Location
    Ontario, Canada
    Posts
    32
    Local Date
    05-02-2024
    Local Time
    07:37 PM
    Thread Starter
    Thanks, but K98 is short for Karabiner 98 or Kar. 98. There were K98a, K98b and K98kicon models that I am aware of.

    I'm told the rifle was German made and bolt is unmodified, so all I'm interested is in identifying the action. I realise the stock/barrel are sporterized, but I'd be changing those out.
    Last edited by Bladerunner; 01-06-2015 at 06:49 PM.

  7. #4
    Legacy Member Salt Flat's Avatar
    Join Date
    Nov 2011
    Last On
    Yesterday @ 06:05 PM
    Location
    USA
    Posts
    760
    Local Date
    05-02-2024
    Local Time
    04:37 PM
    Bladerunner, Just my opinion but this one is not a good candidate for de-sporterizing. To purchase the stock, hardware and sights will cost more than it is worth. Also check barrel length and other mods. As Anzac noted it is probably a KAR98. The bolt handle was straight and was torch bent, causing the rounded bend. The underside of the knob was ground flat to clear the stock. So you have very little original there. At minimum look for one that has not had the barrel cut and still has the original sights. Salt Flat

  8. Thank You to Salt Flat For This Useful Post:


  9. #5
    Legacy Member Salt Flat's Avatar
    Join Date
    Nov 2011
    Last On
    Yesterday @ 06:05 PM
    Location
    USA
    Posts
    760
    Local Date
    05-02-2024
    Local Time
    04:37 PM
    Bladerunner, It will be difficult to I.D. because most all the markings were scrubbed when reblued. The serial number may be there but I don't see it in the photos. Salt Flat

  10. #6
    Legacy Member HOOKED ON HISTORY's Avatar
    Join Date
    Mar 2011
    Last On
    Today @ 06:16 PM
    Location
    MS/USA
    Posts
    4,001
    Local Date
    05-02-2024
    Local Time
    06:37 PM
    Sporters usually make me sad but that is a sleek looking rifle. Not too sad.

  11. #7
    Legacy Member vintage hunter's Avatar
    Join Date
    Dec 2010
    Last On
    @
    Location
    S.C.
    Age
    56
    Posts
    1,680
    Local Date
    05-02-2024
    Local Time
    07:37 PM
    Is the flat on the underside of the knob smooth or checkered?

  12. #8
    Legacy Member Calif-Steve's Avatar
    Join Date
    Mar 2009
    Last On
    10-01-2023 @ 12:52 AM
    Posts
    2,508
    Local Date
    05-02-2024
    Local Time
    06:37 PM
    This is a WWI GEW98 receiver with a WWI Kar98a bolt. VERY nicely done sporter and a VERY poor candidate for reconversion to GI configuration. Try to find a Germanicon Mod 98 cut-down, they are at every gunshow, just start beating the bushes.

  13. #9
    Legacy Member mike webb's Avatar
    Join Date
    Mar 2009
    Last On
    07-10-2023 @ 10:30 PM
    Location
    New Brunswick, Canada
    Posts
    181
    Local Date
    05-02-2024
    Local Time
    08:37 PM
    Like a few others said, a heavily sportered and scrubbed WWI mauser. A poor candidate for restoration but a dandy hunting rifle. By the lines of the stock either sporterized in Germanyicon or done by a German born smith stateside. Very teutonic look about it, I like it.

  14. #10
    FREE MEMBER
    NO Posting or PM's Allowed
    303tom's Avatar
    Join Date
    Feb 2014
    Last On
    10-27-2018 @ 12:55 PM
    Location
    missouri
    Posts
    249
    Local Date
    05-02-2024
    Local Time
    07:37 PM
    Quote Originally Posted by vintage hunter View Post
    Is the flat on the underside of the knob smooth or checkered?
    Or is it hollow ?..................

+ Reply to Thread
Page 1 of 2 1 2 LastLast

Similar Threads

  1. .303 Dum Dum identification
    By Titan303 in forum Ammunition and Reloading for Old Milsurps
    Replies: 4
    Last Post: 04-13-2014, 09:29 PM
  2. Help with identification
    By DMoore in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 6
    Last Post: 09-26-2013, 04:27 AM
  3. help identification my 303
    By rocket in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 3
    Last Post: 09-26-2010, 05:32 AM
  4. .303 Identification
    By Sgt Hannie in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 15
    Last Post: 01-24-2010, 05:39 PM
  5. m1 Identification help
    By softail817 in forum M1/M2 Carbine
    Replies: 10
    Last Post: 10-01-2009, 07:35 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts