+ Reply to Thread
Results 1 to 7 of 7

Thread: "V" is for Victory

Click here to increase the font size Click here to reduce the font size
  1. #1
    FREE MEMBER
    NO Posting or PM's Allowed
    majspud's Avatar
    Join Date
    Jul 2013
    Last On
    07-24-2018 @ 04:44 PM
    Location
    South Shore, MA
    Posts
    205
    Local Date
    04-28-2024
    Local Time
    12:08 AM

    "V" is for Victory

    Finally got my Victory. Sold my M1900 Browning to fund about half of it. As a .38 special, this little piggy most likely stayed home during WWII, but the SN might be within the Navy issue. I'll have to check on that. The .38 special commonly with a 4 inch barrel went to U.S. forces (about 352,000), and the .38/200 S/W cartridge commonly with a 5 inch barrel went out as lend lease (about 571,629). Production of the 4th military and police (Victory) version of the S/W Model 1905 ran from early 1942 until August 1945, totaling 811,119 units. This one with a SN of 353K dates to about August of '43 and is matched correctly to the right grip. Crane and crane recess are numbered to each other as appropriate. Bore is very good, no import mark.

    SW Victory Slideshow by majspud | Photobucket

    Thanks,

    T
    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.
    Last edited by majspud; 06-02-2015 at 09:53 PM. Reason: link

  2. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Location
    Milsurps.Com
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  3. #2
    Advisory Panel browningautorifle's Avatar
    Join Date
    Jul 2008
    Last On
    Yesterday @ 01:54 PM
    Location
    Victoria BC
    Posts
    29,943
    Real Name
    Jim
    Local Date
    04-27-2024
    Local Time
    09:08 PM
    Nice catch, I was never able to find one of those.
    Regards, Jim

  4. Avoid Ads - Become a Contributing Member - Click HERE
  5. #3
    FREE MEMBER
    NO Posting or PM's Allowed
    majspud's Avatar
    Join Date
    Jul 2013
    Last On
    07-24-2018 @ 04:44 PM
    Location
    South Shore, MA
    Posts
    205
    Local Date
    04-28-2024
    Local Time
    12:08 AM
    Thread Starter
    Range report. Bright sun, 61 degrees, very windy. 39 feet, 30 rounds Federal 150gr round nose. Pistol shot high cold, then a little lower. All shots were DA. A couple of times the action seemed to hang up, then go, causing the flyers. Handle is a little small for me, and the trigger reach about 1cm to far for comfort. Fun to shoot though.

    T

  6. #4
    Legacy Member WarPig1976's Avatar
    Join Date
    Jan 2013
    Last On
    01-30-2023 @ 05:49 PM
    Location
    Delaware county, PA just outside Philadelphia.
    Posts
    2,659
    Real Name
    Jeff
    Local Date
    04-27-2024
    Local Time
    11:08 PM
    Excuses are like ...holes,,,, Everybody has one. :mad smile:

    Best to look into that "hang up" issue. Could be a wore out hand.

  7. #5
    Legacy Member vintage hunter's Avatar
    Join Date
    Dec 2010
    Last On
    @
    Location
    S.C.
    Age
    56
    Posts
    1,680
    Local Date
    04-28-2024
    Local Time
    12:08 AM
    Quote Originally Posted by majspud View Post
    A couple of times the action seemed to hang up,
    Check the extractor rod to see if it's worked loose and backed out. It has left hand threads. While you're at it give the cylinder a good spin to see if the rod may be slightly bent.
    Last edited by vintage hunter; 06-07-2015 at 03:40 AM.

  8. #6
    Advisory Panel browningautorifle's Avatar
    Join Date
    Jul 2008
    Last On
    Yesterday @ 01:54 PM
    Location
    Victoria BC
    Posts
    29,943
    Real Name
    Jim
    Local Date
    04-27-2024
    Local Time
    09:08 PM
    There are a few things that can be a bit buggered up, including crud under the ejector...maybe needs a good strip clean and careful assemble.
    Regards, Jim

  9. #7
    Legacy Member MJ1's Avatar
    Join Date
    Sep 2007
    Last On
    02-05-2024 @ 03:28 PM
    Location
    Guanacaste
    Posts
    735
    Local Date
    04-27-2024
    Local Time
    08:08 PM
    Nice catch

    38/200 1942


    MJ, don't take this personally, but that's crap.
    muffett.2008

+ Reply to Thread

Similar Threads

  1. Smith & Wesson "Victory Model"
    By Mikesm44 in forum Other Military Service Pistols and Revolvers
    Replies: 14
    Last Post: 08-25-2014, 02:53 PM
  2. Replies: 23
    Last Post: 03-06-2011, 01:47 PM
  3. 1940/41 Military & Police "Pre-Victory" .380-200 Revolver
    By Badger in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 0
    Last Post: 01-11-2007, 12:57 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts