+ Reply to Thread
Page 1 of 3 1 2 3 LastLast
Results 1 to 10 of 25

Thread: Why I appreciate the Lee Enfield.

Click here to increase the font size Click here to reduce the font size
  1. #1
    FREE MEMBER
    NO Posting or PM's Allowed
    Richard Hare's Avatar
    Join Date
    Mar 2015
    Last On
    11-08-2018 @ 09:04 AM
    Location
    Alberta, Canada.
    Posts
    242
    Real Name
    Richard Hare.
    Local Date
    04-29-2024
    Local Time
    07:44 PM

    Why I appreciate the Lee Enfield.

    Evening Gents,

    Something today made me appreciate the Lee Enfield a bit more!

    I had just finished checking over an old neighbours P 17, and tried out a few shots on target to make sure it worked correctly.

    The only rounds I had were one old .30-03, and 5 newer 150 gr loads.
    Two of the newer rounds had a patch of corrosion on the cases, one on the neck and one near the rim. These patches were small and white, but you could fee where they had eaten into the brass to some degree.
    Thought I'd fire them off anyhow;
    All went well until the last round, which gave me a smart blast of gas in my face.
    I thought I'd hit myself in the eye with my hand for a start.
    On extracting the case, it was the one with the verdigris near the base, and it had opened a small crack, maybe 1/4" long running towards the neck.

    My own fault for firing off iffy ammo But! Anyone who has reloaded lots of .303 for the No 1 Mk 111 and the No 4 rifles, will have had complete head separation more than a time or two. I know I have had it happen a good few times over the years, and (Here's my point)
    I have Never had any gas in my face with these actions.
    It impressed upon me once again, how well designed the Lee Enfield action is.

    All the best,
    Richard.
    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.

  2. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Location
    Milsurps.Com
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  3. #2
    Legacy Member butlersrangers's Avatar
    Join Date
    Nov 2009
    Last On
    Today @ 07:31 PM
    Location
    S.E. Michigan, U.S.A.
    Posts
    737
    Local Date
    04-29-2024
    Local Time
    10:44 PM
    Richard - The 'gas seal' in the event of a complete head separation is more a virtue of the rimmed .303 cartridge case than the Lee-Enfield action design.

    There is a similar benefit shown by the .30-40 'Army' cartridge in the U.S. Kragicon-Jorgensen.

  4. The Following 2 Members Say Thank You to butlersrangers For This Useful Post:


  5. Avoid Ads - Become a Contributing Member - Click HERE
  6. #3
    FREE MEMBER
    NO Posting or PM's Allowed
    cprher's Avatar
    Join Date
    Feb 2013
    Last On
    12-23-2018 @ 09:23 PM
    Location
    Palmyra, VA, USA
    Posts
    109
    Local Date
    04-29-2024
    Local Time
    09:44 PM
    When I was a kid my first real hunting rifle was a customized 1903 Springfield. My Grandfather did the reloading for me as he was the expert back then. When hunting one day the firing pin punctured the primer and a jet of hot gas went into my shooting eye. It hurt so bad I was positive I'd been blinded. I got myself back to my camp so my parents could look my eye over and we went immediately to the doctors. A piece of powder had penetrated the top layer of my cornea but was easily removed by the doctor. I wore a patch for what seemed weeks until it healed but I could feel the scar every time I blinked for years thereafter. It finally felt normal but only after a long, long time. Fortunately, my vision returned to normal after a time. Since then I NEVER shoot without shooting glasses. I recall that my rifle retained the mushroom firing pin knob at the back that was supposed to help prevent this from happening. Oh, and I began to reload for myself after that incident.

    As for Lee Enfields and Krags...I shoot them both and never feel under gunned, especially with my No. 4 Mk 2. Just tested it this last weekend at 200 yards using the battle sight and ladder sight both and was left very impressed with how they compared. It may not be a very pretty rifle, but it is a very elegant design from an engineering, mechanical and ergonomic point of view.

    Keith

  7. #4
    Legacy Member 5thBatt's Avatar
    Join Date
    Dec 2007
    Last On
    04-25-2024 @ 03:13 PM
    Location
    Zombie Town, now with a H
    Posts
    774
    Local Date
    04-30-2024
    Local Time
    02:44 PM
    I once had the misfortune of being to the left of a guy whos cases were spltting at the neck, it was like being hit by a mini sandstorm, he had no idea it was happening until i stopped him & we looked at his cases

  8. #5
    Contributing Member CINDERS's Avatar
    Join Date
    Nov 2009
    Last On
    Yesterday @ 12:33 PM
    Location
    South West Western Australia
    Posts
    7,765
    Real Name
    CINDERS
    Local Date
    04-30-2024
    Local Time
    10:44 AM
    Wonder if the chamber was damaged in the process of that 5thBatt as those gasses would have been like a mini plasma cutter depends on how many rounds he let go whilst suffering that condition.

  9. #6
    FREE MEMBER
    NO Posting or PM's Allowed
    Richard Hare's Avatar
    Join Date
    Mar 2015
    Last On
    11-08-2018 @ 09:04 AM
    Location
    Alberta, Canada.
    Posts
    242
    Real Name
    Richard Hare.
    Local Date
    04-29-2024
    Local Time
    07:44 PM
    Thread Starter
    Hello Butlersrangers, Fancy meeting you here.

    You are very likely right about the rimmed case rather than the action blocking gases, and whether by happy coincidence or design, the fact remains it's a wonderful combination and very nice to know that it works so well!

    Keith,
    I too never feel under-gunned with the .303, and think you hit on a key point when you mentioned Ergonomic!

    All the best,
    Richard.

  10. #7
    FREE MEMBER
    NO Posting or PM's Allowed
    Richard Hare's Avatar
    Join Date
    Mar 2015
    Last On
    11-08-2018 @ 09:04 AM
    Location
    Alberta, Canada.
    Posts
    242
    Real Name
    Richard Hare.
    Local Date
    04-29-2024
    Local Time
    07:44 PM
    Thread Starter
    ButlersRangers,

    In the above I wasn't meaning to come over sarky, I was just surprised to "meet" you here after we have shared discussions on arms of an earlier period in another forum for a long while. (Brit. Mil. Forums)
    Had no idea we shared an interest in the Lee Enfiled as well!

    I apologise for not putting it in a clearer manner.

    Best regards,
    Richard. (Pukka B. in t'other forum)

  11. #8
    Legacy Member butlersrangers's Avatar
    Join Date
    Nov 2009
    Last On
    Today @ 07:31 PM
    Location
    S.E. Michigan, U.S.A.
    Posts
    737
    Local Date
    04-29-2024
    Local Time
    10:44 PM
    Richard/Pukka, your knowledge and contributions are always enjoyed. I'm 'bilingual' now!

  12. #9
    Advisory Panel Parashooter's Avatar
    Join Date
    Dec 2008
    Last On
    Today @ 03:51 PM
    Location
    Connecticut
    Age
    79
    Posts
    677
    Local Date
    04-29-2024
    Local Time
    10:44 PM
    It's not just the rimmed case that helps prevent gas reaching the firer. Unlike Mauser types, the Lee, Kragicon, and others have no left lug raceway serving as a gas conduit from breech toward eyeball. Consequently, gas from a failed case is vented only at the front of the receiver. Here's a demonstration -

    This case had been reloaded with heavy loads enough times so it was stretched near breaking.



    I loaded it with a 180-grain bullet and 40 grains of 4895 - a reasonably stiff charge about 2 grains under "maximum" - and fired it in a much-abused Savage No.4 with a clean sheet of typing paper wrapped around the receiver.



    When I opened the bolt, the separated head extracted. (The front piece of the case fell out when I turned the rifle muzzle-up.)



    The sooty paper shows where some gas escaped. No rips or holes, just a little soot - and only where the bolt head meets the receiver ring. Had I been shooting from the shoulder and wearing glasses, I probably wouldn't have felt the leak at all.

  13. The Following 7 Members Say Thank You to Parashooter For This Useful Post:


  14. #10
    FREE MEMBER
    NO Posting or PM's Allowed
    Richard Hare's Avatar
    Join Date
    Mar 2015
    Last On
    11-08-2018 @ 09:04 AM
    Location
    Alberta, Canada.
    Posts
    242
    Real Name
    Richard Hare.
    Local Date
    04-29-2024
    Local Time
    07:44 PM
    Thread Starter
    That's very interesting, Para. Never seen that experiment before.

    I too have had a good number of cases come out looking like the one above, (in two pieces) and though I don't wear shooting glasses, (yes I Know I should) I've never felt the slightest bit of gas on my eyes or face.

    It's still a grand rifle. :-)

    B's Rangers, :-)

+ Reply to Thread
Page 1 of 3 1 2 3 LastLast

Similar Threads

  1. Update: How to wrap an Enfield pull-through and steps for Enfield care & cleaning
    By Badger in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 1
    Last Post: 09-13-2013, 09:30 AM
  2. 1924 ShtLE (Short Lee-Enfield) No.1 MkV Rifle (Mfg by RSAF Enfield)
    By Badger in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 0
    Last Post: 04-07-2007, 12:12 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts