-
Contributing Member
I'm sorry I added the pictures of the Sling that I bought, but took them down and added the one that came inside some foam deep in the box.
Last edited by imntxs554; 03-16-2016 at 10:37 PM.
-
-
03-08-2016 08:57 PM
# ADS
Friends and Sponsors
-
Legacy Member
Without knowing what the serial starts with, it will be hard to say if the rear sight is original or not. Frank, post some closeup pictures of the rear sight from the top if you can. If it's as late a serial as yous aid it's possible. The Hemphill sight was used sporadically at the end of RMC production.
-
-
-
Contributing Member
I took some parts off my Carbine and found so many Rockola Parts I wonder why they used a Inland TH. The Bolt is Rockola , extractor and the Firing pin. There is one problem I don't like, the Flip Safety is loose. I would like to change it or maybe just replace the safety spring. I really don't want to alter any parts, but I do have a Original T2 Push Safety I might try I don't have another Safety Spring or Flip Safety to try to see if it would stay tighter than it is.
-
-
Frank: There are (2) different lengths of the spring and plunger assemblies. The longer one should help if you now have the shorter one. - Bob
I think the longer one has (8) coils that you can count between the plungers and the shorter one has (7). Hope I've got that right.
-
The Following 2 Members Say Thank You to USGI For This Useful Post:
-
Legacy Member
Frank, the plunger/spring length Bob (USGI) mentions is correct. I would check the length on it first and compare it another one you have and see if you note any difference. BTW, I have 3 or 4 carbines with type original type two safeties and they tend to have a bit of slop when you push them side to side. It's not a huge thing, but it is noticeable.
-
The Following 2 Members Say Thank You to deldriver For This Useful Post:
-
Contributing Member
Someone is sending me the longer one and see if it will work and keep the Flip Safety from Hanging down. Thanks for the Spring and Thank Y'all guys for the help and support.
Frank
-