Looking to build Yugo sniper

[sdh1911]

I'm starting to put together a nice little yugo collection and am I pondering putting together a sniper knock-off, could anyone share a little insite as to what would be needed and where I can get the goods, as always, many thanks-SDH

Information

Warning: This is a relatively older thread This discussion is older than 360 days. Some information contained in it may no longer be current.

[Claven2]

You need a set of Zrak bases and rings (they are sorta EAW knock-offs with a different latching system). The Scope should be an ON-M76B yugoslavian sniper scope.

You can get both the rings and scope you need from P&A Distributing in the US.

[sdh1911]

Thanks for the info, sounds good-SDH

[arado]

The only place I have seen ONM76B scopes are on the issue M76 AK sniper in 7.92x57. But you can buy anything anywhere. Except Zrak scope for SKS M59 Gary,... owner of M76.

[MJ1]

I would think you would need a Yugo sniper?

[read6737]

Hi

I have wanted to build a M48 sniper as well.
I built a very very nice rifle from bits, and it shoots very very well.
The nicest mauser I have, and I have 9 others 4x G98s, 1908, K98, another M48, an 08/36 in bits and a modern hunting 98.

I have fitted original Krak mounts, and a LS 6X42 N, Zrak hunting scope,
I contacted Zark who said .......

Yes the N and ON versions were used.

Hi David
Yes. This scope was originally made for hunting but back in 90's due to limited or no supply of any weapons or ammunition this was used (very effectively) through whole war.
Sasha

I hope this is of interest to you all.

David