-
FREE MEMBER
NO Posting or PM's Allowed
BRASSO Metal Polish ' For over 100 years '
8 oz. From Mystic Army & Navy
I'm sure this plastic bottle will last me and my family the next 100
Information
|
Warning: This is a relatively older thread This discussion is older than 360 days. Some information contained in it may no longer be current. |
|
-
06-15-2016 04:10 PM
# ADS
Friends and Sponsors
-
Contributing Member
I bought a can of the stuff 34 years ago to polish my military brass an I still have it and its half full.
-
-
-
Legacy Member
Antique technology!
The BETTER alternative is stuff called "Goddards Glow".
This comes as a paste in a tube.
Unlike "Brasso" which leaves a dry surface, often with annoying white powder residue on the brass, "Glow" contains some sort of wax that leaves a thin. protective film on the metal. Furthermore, the "residue" is BLACK. This may not look good on your nice, white "pox-doctor's clerk" parade webbing.
For decades, generations of young diggers struggled with "tarting-up" '37 Pattern webbing belts. This involved:
Removing the rear harness buckles,
Bringing the Khaki fabric to a rich black sheen using only boot polish,
Achieving a mirror sheen on the buckles using only an old sock and a barrel of Brasso.
The more tech-savvy in the workshops did this:
Thoroughly treat the raw webbing with black "Raven Oil", to give a solid background colour.
Refine the surface of the brass fittings, (buckle and keepers) using a motorized cloth buffing wheel, loaded with fine grit in a wax "stick".
If available, do the detailed work with the trusty Dremel and small, felt "bobs". The REALLY "hard-core got their "keepers" re-profiled by getting them "rolled" at specialist jewelers shops.
Once the Raven Oil has dried, start applying black "leather lacquer" (available from saddleries and REAL boot repairers), in thin coats. ONLY coat those area likely to be seen during the RSM's pre-parade inspection. This maintains some flexibility in the belt.
Re-assemble carefully.
"Maintenance" involved, firstly, keeping the whole assembly in an airtight plastic bag to reduce the rate of tarnishing.
Any signs of "dullness' on the brass could be easily dealt with using the "Glow" on the parts in situ on the belt, as the residue, is BLACK.
What kept the "keepers" in place? An Oz 50cent coin, jammed in between the two "layers" of belt. That method also ensured the appropriately equipped troops had cash for a beer or five at the "boozer" after the parade. A ten ounce "pot" cost twenty cents in our tin shed at the time.
The webbing bayonet frogs AND rifle slings, (L1A1 days), were given the same treatment.
A LOT of work "up front", but minimal maintenance and prep for YEARS afterwards.
Last edited by Bruce_in_Oz; 06-16-2016 at 07:20 PM.
-
-
FREE MEMBER
NO Posting or PM's Allowed
The smell of BRASSO and black kiwi shoe polish when I would shine Dad's combat boots, brass, buckle and buttons before drill. He would of course blouse the heavy starch trousers and button up that stiff collar after shaving and off he went. US GI ready to fall into formation at the armory.