+ Reply to Thread
Results 1 to 5 of 5

Thread: M1 Garand and Reloder 15.

Click here to increase the font size Click here to reduce the font size
  1. #1
    FREE MEMBER
    NO Posting or PM's Allowed
    1903shooter's Avatar
    Join Date
    Mar 2009
    Last On
    04-04-2009 @ 12:22 PM
    Location
    California
    Posts
    6
    Local Date
    04-29-2024
    Local Time
    04:12 AM

    M1 Garand and Reloder 15.

    Gents,


    Need opinions on using Reloder 15 in the M1icon, 155gr and 168gr BTHP, Hornady and Nosler bullets. Load data would also be appreciated. Thanks, 1903shooter
    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.

  2. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Location
    Milsurps.Com
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  3. #2
    FREE MEMBER
    NO Posting or PM's Allowed
    Kirk's Avatar
    Join Date
    Mar 2009
    Last On
    05-19-2012 @ 03:18 PM
    Location
    Tennessee
    Posts
    550
    Local Date
    04-29-2024
    Local Time
    04:12 AM
    Rx 15 has a moderate slow burning rate similar to 4320. It may be a little on the slow side for a Garandicon. It is slower burning than 4064, the powder normally considered the "slowest" for use in a Garand.

  4. Avoid Ads - Become a Contributing Member - Click HERE
  5. #3
    Legacy Member AKA Hugh Uno's Avatar
    Join Date
    Mar 2009
    Last On
    04-12-2020 @ 07:37 PM
    Posts
    303
    Local Date
    04-29-2024
    Local Time
    05:12 AM

    worked very well for me

    much better than I thought. no problems. about same results as Varget. I am pretty sure I was at least two grains under max and it functioned and ejected normally. unless you have an adjustable gas plug, you may not want to venture much higher.

  6. #4
    FREE MEMBER
    NO Posting or PM's Allowed
    Bric's Avatar
    Join Date
    Mar 2009
    Last On
    06-18-2013 @ 07:41 PM
    Posts
    3
    Local Date
    04-29-2024
    Local Time
    05:12 AM

    Thumbs up

    I will second the good results with RL15. I use it exclusively in my garand. I do not have the load data handy but I am using Winchester FMJ/BT's. Accuracy is in my collector HRA is outstanding and no problems with function at all.

    I tried using it one reloading session to cut down on the # of different powders I use and never looked back. Your mileage may vary with your bullet selection though.

    HTH....

  7. #5
    FREE MEMBER
    NO Posting or PM's Allowed
    John Beall's Avatar
    Join Date
    Mar 2009
    Last On
    08-13-2009 @ 08:58 PM
    Posts
    28
    Local Date
    04-29-2024
    Local Time
    05:12 AM
    Hey Mr.1903, I can share what I can. Hornadays load data shows RL-15 for 168g as follows.
    43.2=2300fps
    44.6=2400fps
    46.0=2500fps
    47.5=2600fps{ max charge,use with caution }
    they don't show RL-15 with a 150/155. but I can say I have used the hornaday 150bt-fmj with very good results. best I got was N-135 at 47.5g. sorry but Idon't remember the OAL, but ALL the canalure was still showing. I loaded to the bottom of the canalure, yes it looks funny, but shoots GREAT. for whats its worth, yesterday I shot some M-2 pull down bullets with Varget, 45g's worked really well. Hornaday shows data with Varget with the 150bt-fmj {which is close to RL-15} the following is with varget.
    42.3=2400fps
    44.2=2500fps
    46.2=2600fps {max charge, use with caution }
    this info came from Hornaday "for an M-1 Garandicon " not a bolt gun, most loading info is for bolt guns and will show higher charges. hope this helps.
    CRB

+ Reply to Thread

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts