-
Advisory Panel
Originally Posted by
Woodsy
No, it is a part of something I have been developing and am just getting into production. The original was in production more than 100 years ago.
Hotchkiss portative bits?
or Madsen?
-
-
02-09-2017 03:32 PM
# ADS
Friends and Sponsors
-
Contributing Member
Brit, you are heading in the right direction. It is not for a 'foreign' gun, but one that was very popular with the Allies. You have to guess what the part is (or will be when finished).
---------- Post added at 09:37 AM ---------- Previous post was at 09:36 AM ----------
Not Hotchkiss or Madsen. Brit has mentioned the correct gun.
-
-
-
Contributing Member
I will add that part is partially concealed, but still at least 50% visible on the gun. It is not something that is seen in normal disassembly.
-
-
Legacy Member
Is it the bit that sits in the centre of the Lewis Gun Drum?
-
Thank You to Brit plumber For This Useful Post:
-
Contributing Member
Attachment 80546Attachment 80547Attachment 80545Attachment 80548Attachment 80549Well done Brit! That will be a couple of pints I owe you if you ever make it to NZ. It is the magazine catch blank which will go into a forming die to put the dog-leg into the centre leg which catches the groove in the centre post. The rectangular notch is for the spring. My first gun is not yet complete (rear sight, mag catch, and bipod to go yet).
-
The Following 4 Members Say Thank You to Woodsy For This Useful Post:
-
Legacy Member
Very nice, are these display or will they be functional? If they are accurate parts you may have another market for spare parts in the USA.
-
-
Contributing Member
They are 'cock & click' replicas, mainly aluminium and few steel bits where needed. They are 1:1 scale and real magazines will fit. There is enough room inside the jacket to put a self-contained gas firing system. This space is accessed by unscrewing the gas key and sliding the jacket off. The mag catch is similar but not identical to the originals. I will also do the various aircraft versions with the 97 rd drum, air service sights, and spade grip.
-
-
Contributing Member
Very nice work Woodsey, the quality of build and finish looks superb!
I am sure they will sell very well...
-
-
Contributing Member
34a cp., btg. Susa, 3° rgt. Alpini
-