T4 Trigger

[Chubbs]

Hi Guys

Should the trigger hang loose on the T4 so that you almost have a 3 stage trigger. The 1st being taking up the slack and the further 2 are the engaging of the 2 sears. Or should there be tension on trigger all the time.

Regards Chubbs

Attachment 85129

The cocking bent ( i think that is the correct term.) can not go back any further due to contact with the receiver.

Information

Warning: This is a relatively older thread This discussion is older than 360 days. Some information contained in it may no longer be current.

[Peter Laidler]

That's how it should be. You cannot mistake the trigger pressures.