Clip pouch for M1 Carbine

[szvacek]

I recently purchased a M1 Carbine carried my a friend's father-in-Law in WWII. It has a clip pouch on the stock that I would like to get off. I have removed the sling but the pouch will not slip off the stock. Is there some trick I'm not aware of?Attachment 94023

Information

Warning: This is a relatively older thread This discussion is older than 360 days. Some information contained in it may no longer be current.

[painter777]

Welcome !!
Make you a deal.......
Show us some pictures of your Carbine,
And I'll tell you how to remove the Mag Pouch.

Deal ??

[HOOKED ON HISTORY]

Show us some pictures of your Carbine,
And I'll tell you how to remove the Mag Pouch.

Deal ??

Sounds fair

[JimF4M1s (Deceased)]

Welcome to the forum. You can learn many things here. One is that the guys joke around a bit. But they are also very knowledgeable about out hobby, the M1 carbine.

Take the metal out of the stock and slide it off the front end.

Magazine pouch, not clip pouch.

[deldriver]

Some belt pouches I have dealt with have been very tight on the stock and needed some gentle persuasion to get them removed. And yes, push (or what ever) them forward to remove. with the barreled action removed as Jim suggested.

[painter777]

JIM...... DEL............ ??

Boy you guys sang like birds.
Guess your against a little blackmail ?

To OP,
Lightly grease or oil the barrel before you slide the barrel band forward, to limit scratches. You don't have to remove the recoilplate. Once the barrel band is loose and slid forward, the top handguard will come forward.. then off. Now you can lift the front end of the barrel and receiver up and out. Good time to clean and get pictures while it's out.

Again Welcome

[USGI]

Technically, they're called Magazine Pockets! - Bob

[CINDERS]

Welcome to the forum as you have just found out here two things happen;
1. There are plenty of helpful & knowledgeable people here willing to share and help you.

2. That blackmail is part of the norm here............ (in good jest)

[painter777]

While we wait on our new member,
How bout we guess who the maker is of his carbine ?

I'll guess IBM......... Why you ask? That Butt stock looks like a LW-B to me. Yep..... IBM

Any takers?

[W5USMC]

While we wait on our new member,
How bout we guess who the maker is of his carbine ?

I'll guess IBM......... Why you ask? That Butt stock looks like a LW-B to me. Yep..... IBM

Any takers?

I am guessing that it is a Saginaw S'G'.