Poor Little SKS

[louthepou]

I recently acquired two SKS'es from two different stores. One from a small business, as I always try to support small businesses. This is where real service and knowledge can be found. Throughout the wait (for the rifles to enter Canada), I had good comunication and updates, and the rifle got to me as described; I am very happy with that rifle.

The second one I got from a larger store. The experience was the total opposite. Communication wasn't the best. But more importantly, the person I talked to last, when I was contacted to arrange payment and shippment, didn't have the knowledge I expected and could have been selling fresh fruits or framing nails or garden equipment it would have been the same for this person. Needless to say I was not happy when I received that SKS.

Oh, did I mention the rifle was really badly packaged and dents and scratches resulted?

So, what do I do when an ugly duckling gets in the house? I get to work.

There are no miracles with this one, simply a good cleaning, some paint removal, and refinishing the stock.

This rifle is a refurbed Russian SKS from 1952 (Tula Arsenal). During the refurb (overseas), it received some new and used parts; numbers are therefore force-matched. Paint was applied (poorly) everywhere. I won't strip the barrel, receiver etc., but I did strip the bolt (for obvious reasons - see pictures below). I then cleaned the stock with Methy Hydrate - not down to the wood, but enough shellac was removed to see some of the wood grain, and remove rough areas in the finish (chips in the shellac, some really uneven sections, etc).

I then applied a few coats of new shellac. The result isn't super-even, but then again should shellac coats on a Russian SKS be perfect.

Here are some before and after pics. Sorry I forgot to take a before picture of the stock. Imagine it much darker, with some spots where shellac flaked off, and lots more surface scratches.

Before, close ups:

Here, note the paint flaking off the firing pin.


Here, note the sand everywhere...



Two after pics:



Cheers,

Lou

Information

Warning: This is a relatively older thread This discussion is older than 360 days. Some information contained in it may no longer be current.

[Stevo]

I'm jealous, you got sand with yours.

[louthepou]

I'm not as special and privileged as I thought I was, I didn't get rotten wood on the stock like another buyer from the same supplier!

[Stevo]

True. There seems to be some real beaters in that SIR batch. I'm happy with mine though.

I think I'm going to strip mine and do the stock in BLO. I've never really been a shellac fan.

[artu44]

I solved the problem of a mistreated mint Norinco with an heavy sporterization. Most time I've spent was in making the walnut stock from a plain blank.

[wbartlett]

mk4 no.1 totaly stripped stock and reblued metal..what a nice easy gun to work on.. I dipped most of the metal to get a nice new finish...then stripped ,steamed,bleached and black stained all wood then brushed on semi gloss varathane and rubbed it off.....what doyou think, this was my first retored firearm, also justed finished my sks.....it's even nice,,,patting my self on the back. trying figure out how to post pics? Can't get them to the recommended bytes.