+ Reply to Thread
Page 1 of 2 1 2 LastLast
Results 1 to 10 of 18

Thread: Lee ENfield No.4 sideways barrel movement

Click here to increase the font size Click here to reduce the font size

Hybrid View

  1. #1
    Legacy Member Joje's Avatar
    Join Date
    Jun 2019
    Last On
    04-13-2021 @ 03:03 PM
    Location
    Netherlands
    Posts
    6
    Local Date
    05-03-2024
    Local Time
    01:45 AM

    Lee ENfield No.4 sideways barrel movement

    Hi,

    This is my forst post on this forum and I have to say, a lot of knowledge can be found here! I'm in the possesion of a Candadian Arsenals CNo4 mk1* from 1950, and my barrel can move to the left ever so slightly. (I also have a 1944 Long Branche No4 mk1* but that's been deactivated) The rifle does have good up-pressure, but with some force I can push the end of the barrel slightly to the left. The barrel looks to be in the middle of the barrel channel, and there's no wood touching the barrel from the reinforce until the pressure area at the forend. Does anyone have an idea if this is normal?

    Yours sincerely,

    Jorrit
    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.

  2. #2
    Contributing Member CINDERS's Avatar
    Join Date
    Nov 2009
    Last On
    Yesterday @ 11:23 AM
    Location
    South West Western Australia
    Posts
    7,765
    Real Name
    CINDERS
    Local Date
    05-03-2024
    Local Time
    07:45 AM
    Read this post to get the drift on the bedding.
    https://www.google.com/url?client=in...KGuauXdSbSXrDe

  3. Avoid Ads - Become a Contributing Member - Click HERE
  4. #3
    Legacy Member Sunray's Avatar
    Join Date
    Mar 2009
    Last On
    03-29-2021 @ 03:01 PM
    Location
    London, Ontario
    Posts
    1,053
    Local Date
    05-02-2024
    Local Time
    07:45 PM
    Long Branch was the name of the plant ALL Canadianicon Arsenals No. 4 Rifles were made. A '1950' Long Branch was one of the finest No. 4 Rifles ever made.
    "...barrel can move..." How? If you push on the muzzle on any No. 4 it'll appear to move.
    Spelling and Grammar count!

  5. #4
    Legacy Member Joje's Avatar
    Join Date
    Jun 2019
    Last On
    04-13-2021 @ 03:03 PM
    Location
    Netherlands
    Posts
    6
    Local Date
    05-03-2024
    Local Time
    01:45 AM
    Thread Starter
    Hi,

    It will move to the left, but not to the right, when looking at the rifle from above. With some force I can push the end of the barrel slightly to the left. I know an L-E should have 'up-pressure' at the muzzle so that's normal, but the movement to the left concerns me,, if it moved to the right also I would think this is normal, but it doesn't?

    Yours sincerely,

    Jorrit

  6. #5
    Advisory Panel Brian Dick's Avatar
    Join Date
    Apr 2008
    Last On
    04-29-2024 @ 01:57 PM
    Location
    Edgefield, SC USA
    Posts
    4,052
    Local Date
    05-02-2024
    Local Time
    07:45 PM
    The barrel should be free to move a bit both left and right but should snap back to center. This providing there isn't a slight warp which is always possible. It may be bearing high on the right rear end of the forend where it contacts the butt socket. Just a light touch with a file or sanding block on the high side should put it back in the center of the channel providing it isn't caused by a warp. Please take the time to read Peter Laidlericon's article on fitting forends that is posted here which covers these things in detail. Maybe he'll chime in too with his opinion on your bearings. Fitting forends is a bit of a black art and no two are exactly alike. It's a never ending learning process for nimrods like myself but I'm getting better with each one I fit. I always chuckle to myself when guys take a perfectly good original forend off because it has some handling marks from service and replace it with new wood for cosmetic reasons. If they don't pay attention to detail, they'll find they have a rifle that looks new but doesn't shoot worth a crap. Food for thought.

  7. Thank You to Brian Dick For This Useful Post:


  8. #6
    Legacy Member Joje's Avatar
    Join Date
    Jun 2019
    Last On
    04-13-2021 @ 03:03 PM
    Location
    Netherlands
    Posts
    6
    Local Date
    05-03-2024
    Local Time
    01:45 AM
    Thread Starter
    Hi Brian,

    Thank you for your information. I just read the article of Peter Laidlericon on fitting forends and it was very informative and interesting! As for your chuckling, I understand that completely and I myself don't mind if my rifle looks like it's been used (considering it shoots well). I actually like a bit of character in a rifle.

    Yours sincerely,

    Jorrit

  9. #7
    Advisory Panel Brian Dick's Avatar
    Join Date
    Apr 2008
    Last On
    04-29-2024 @ 01:57 PM
    Location
    Edgefield, SC USA
    Posts
    4,052
    Local Date
    05-02-2024
    Local Time
    07:45 PM
    Hi Jorrit,

    You at least have a basic knowledge now of what to look for. I went to the trouble not long ago of patching and refinishing to spec a Savage No.4 forend to use in a restoration I was doing for a good friend. After getting it all pretty and ready to install, I assembled it and it was warped like a banana at the muzzle end! Boy, did I feel stupid because the only thing I didn't do was try it on first before expending all of that time and energy on it! Lesson learned and it won't happen again. It was not serviceable at all and may be a candidate for a replacement L42 forend some day if the need ever arises. The only way to repair a warp like that is to cut it off.

    Brian

  10. Thank You to Brian Dick For This Useful Post:


  11. #8
    Contributing Member mrclark303's Avatar
    Join Date
    Jul 2012
    Last On
    Today @ 03:41 PM
    Location
    The wild west of England
    Posts
    3,406
    Real Name
    Mr Clark
    Local Date
    05-03-2024
    Local Time
    12:45 AM
    Quote Originally Posted by Brian Dickicon View Post
    Hi Jorrit,

    You at least have a basic knowledge now of what to look for. I went to the trouble not long ago of patching and refinishing to spec a Savage No.4 forend to use in a restoration I was doing for a good friend. After getting it all pretty and ready to install, I assembled it and it was warped like a banana at the muzzle end! Boy, did I feel stupid because the only thing I didn't do was try it on first before expending all of that time and energy on it! Lesson learned and it won't happen again. It was not serviceable at all and may be a candidate for a replacement L42 forend some day if the need ever arises. The only way to repair a warp like that is to cut it off.

    Brian
    I've tried all sorts in the past to remove the warp Brian, steaming, clamping etc ...
    It always comes back.

  12. #9
    Legacy Member Joje's Avatar
    Join Date
    Jun 2019
    Last On
    04-13-2021 @ 03:03 PM
    Location
    Netherlands
    Posts
    6
    Local Date
    05-03-2024
    Local Time
    01:45 AM
    Thread Starter
    Hi,

    I just fitted the forestock of my 1944 Long Branch (deactivated) to my rifle. It was a perfect fit and a much tighter fit, so I guess the draws of the other stock might be a little worn also. The barrel is now perfectly centered and free too move a tad left/right, I'm happy

    Yours sincerely,

    Jorrit

  13. #10
    Legacy Member MSW2's Avatar
    Join Date
    May 2016
    Last On
    Yesterday @ 03:44 PM
    Location
    RSA
    Posts
    94
    Local Date
    05-03-2024
    Local Time
    01:45 AM
    Your next step should be to shoot it and make sure everything is 100%.

+ Reply to Thread
Page 1 of 2 1 2 LastLast

Similar Threads

  1. Enfield barrell movement
    By average joe in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 5
    Last Post: 12-17-2014, 11:12 AM
  2. How do I fix 1903-a3 peep that moves sideways?
    By Szumi in forum M1903/1903A3/A4 Springfield Rifle
    Replies: 8
    Last Post: 08-26-2012, 11:57 AM
  3. Front sight…..sideways N or Z
    By Hercules Powder in forum M1/M2 Carbine
    Replies: 3
    Last Post: 12-22-2010, 09:09 PM
  4. Ishy 2A Bolt movement on firing
    By how1erd in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 7
    Last Post: 04-23-2010, 01:19 PM
  5. Foreward/Aft Movement In Stock
    By Homer03 in forum M1 Garand/M14/M1A Rifles
    Replies: 2
    Last Post: 03-16-2009, 05:14 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts