1950 Long Branch No4 MkI* Lower Band Help

[adh2]

Ok everyone...I admit fault here. When reinstalling the lower band on my mint LB rifle, I stripped the threads on the lower band. I have been looking for the last year to find a NOS replacement with screw to no avail. One dealer in Canada stated he had one but could not find it. My rifle is a 1950 with a 94L prefix on the serial number. Any assistance is greatly appreciated.

Information

Warning: This is a relatively older thread This discussion is older than 360 days. Some information contained in it may no longer be current.

[browningautorifle]

If you place a WTB here in forum you should be able to glean one from the pockets of some of these guys...

[adh2]

WTB posted...fingers crossed. Any other leads would be appreciated.

[Flying10uk]

It shouldn't be that difficult to repair your existing band and if you can't do it your self you could ask someone with some metalworking skills.

There are several ways that you could tackle it but the simplest way may be to weld up the stripped tapped hole using tig weld, re-dril and re-tap the correct thread.

[Towarzysz_Beagle]

By lower band are you talking about the middle band on the hand guards?

If so shouldn't Numrich carry them?

[Surpmil]

By "mint" you mean has been FTR'd in the UK - where that British made band was presumably installed and the rest of the rifle painted black?

[adh2]

Mint means original finish...The rifle has never been through FTR.

---------- Post added at 07:51 AM ---------- Previous post was at 07:49 AM ----------

By lower band are you talking about the middle band on the hand guards?

If so shouldn't Numrich carry them?

Yes, the middle band where one attaches the sling. The Numrich ones are not marked like this original LB lower band.

[MasterChief]

Fill the stripped thread with silver solder and tap new threads. Could probably do it with propane, MAPP gas for sure. Best wishes.

[bros]

Mint means original finish...The rifle has never been through FTR.

---------- Post added at 07:51 AM ---------- Previous post was at 07:49 AM ----------



Yes, the middle band where one attaches the sling. The Numrich ones are not marked like this original LB lower band.

I can maybe help you out but you have to be more specific.........if you want the proper band as it would have left the factory with then it should have a LB stamp.....if you want that exact stamp as in your photo that is not a Long Branch manufactured part and therefore not correct to your "mint" rifle but that's up to you.
Let me know which one you want to install and like I said I may be able to help you!

[Sunray]

FTR'd, anywhere, means it is very decidedly not "mint".
"...Mint means original finish..." No it doesn't. Mint means unfired and exactly as it came out of the factory. Highly unlikely to be any Brit parts in Canadian Arsenals - Long Branch.
"...not marked like this..." The chances of find one with that mark are slim to none.
Where you are matters. Epps' wants $22.99 for a No. 4 Rifle Middle Stock band.
Firearm Parts - Hunting