-
Legacy Member
PH-5c screws?
Where can I get some that only attach to the left side of the action. The one I have goes through both sides and is ether not tight enough and keeps coming loose or is too tight and binds the bolt.
Information
|
Warning: This is a relatively older thread This discussion is older than 360 days. Some information contained in it may no longer be current. |
|
Proud bitter clinger and even more proud to be ranked among the deplorable's
-
-
11-11-2020 11:20 AM
# ADS
Friends and Sponsors
-
Advisory Panel
Originally Posted by
Rumpelhardt
too tight and binds the bolt
Just take down the overall length and don't have them go so far through the receiver. Just a few passes with a file...on the end.
-
-
-
Legacy Member
Originally Posted by
Rumpelhardt
Where can I get some that only attach to the left side of the action. The one I have goes through both sides and is ether not tight enough and keeps coming loose or is too tight and binds the bolt.
I just set up a 'tube' of the correct length to act as a spacer and tightened the nut up against it.
Mine are not the best, but they are not too bad. I can think of lots of Enfields I'd rather have but instead of constantly striving for more, sometimes it's good to be satisfied with what one has...
-
-
Legacy Member
Originally Posted by
Alan de Enfield
I just set up a 'tube' of the correct length to act as a spacer and tightened the nut up against it.
Great idea. Thanks. Why didn't I think of that.
Proud bitter clinger and even more proud to be ranked among the deplorable's
-
-
Legacy Member
Having a sort out the other day I came across a bag of each screws fo attaching the PH5C They are overlength but very easy to shorten to the correct length. There are at least 50 of each PM me and I will send you a set.
-