First 1903a3

[Oysters]

G'day, I've recently helped out a 1903A3 that was in need of a home (as one must), however these rifles are not all that common in my part of the world so I've been trying to learn a bit about it as I'm sure to get a few queries. I figure the best place to come with what I think I know is to the ever helpful experts here.

I believe this rifle to be a re-build or restoration as It's a Smith Corona Receiver which from the serial I believe to be '43, whereas the barrel is clearly marked as a '44 Remington and probably an after service life replacement as it is immaculate inside. All other metal fittings that are marked are marked 'R' (Sling swivel, Stacking Swivel, nose cap, front sight), I could of course be wrong but I think the butt plate is also Remington.

The Bolt is marked R on the extractor and arm, I'm a little unsure on the cocking piece, but I believe it Remington also, the cut-off is also marked 'R'

From what I've read the stock is an earlier pinned type before recoil bolts were added to assist with grenade launching and looks to have a proofing mark behind the trigger guard, and a 'O' like marking in front of the trigger guard, it's got an 'OG' marking on the side which I've been told is an arsenal marking and it has no marking under the cut-off.
It has a few holes in the side in front of the barrel band and under the comb where it looks to me like someone has once has side mount sling fitted.

One question I do have though, is the Cut-off lever seems to be leaving a fair bit of wear on the receiver finish, is this considered normal, or is it due to the mixed parts or perhaps an incorrect assembly by a previous owner?

Thanks you all for your time

Information

Warning: This is a relatively older thread This discussion is older than 360 days. Some information contained in it may no longer be current.