+ Reply to Thread
Page 1 of 6 1 2 3 ... LastLast
Results 1 to 10 of 55

Thread: Bren tripod t&e adjustment

Click here to increase the font size Click here to reduce the font size
  1. #1
    Legacy Member cal50's Avatar
    Join Date
    Mar 2019
    Last On
    Yesterday @ 04:33 PM
    Location
    Ohio
    Posts
    117
    Local Date
    10-08-2024
    Local Time
    02:33 AM

    Bren tripod t&e adjustment

    Whats the proper / correct way to adjust the traverse clamp lever & clamp nut ?

    I just received a nice MKI tripod and my degree ring is painted green. The traverse clamp is not really locking it down and the paint makes it "gummy".

    Planning on removing the green paint and want to correctly adjust the traverse clamp and lever.
    I have not had a chance to study it but not trying to re-invent the wheel and wondering what the official method is for adjustment .

    Too bad it cant talk , I wonder where my AA extension rods ended up!





    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.

  2. Thank You to cal50 For This Useful Post:


  3. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Location
    Milsurps.Com
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  4. #2
    Advisory Panel browningautorifle's Avatar
    Join Date
    Jul 2008
    Last On
    Yesterday @ 10:15 PM
    Location
    Victoria BC
    Posts
    30,340
    Real Name
    Jim
    Local Date
    10-07-2024
    Local Time
    11:33 PM
    You shouldn't have paint on the top of the bar, it's got numbers you need to read. The paint will be a big factor in gummy or sluggish movement. If you clean the paint out of the mating surfaces on the T&E you'll end your problems.
    Regards, Jim

  5. The Following 3 Members Say Thank You to browningautorifle For This Useful Post:


  6. Avoid Ads - Become a Contributing Member - Click HERE
  7. #3
    Legacy Member WallyG.'s Avatar
    Join Date
    Jan 2008
    Last On
    07-07-2024 @ 10:49 AM
    Location
    Heart of Dixie
    Age
    62
    Posts
    126
    Local Date
    10-08-2024
    Local Time
    01:33 AM
    You might also want to look into finding a replacement front attachment pivot... from the picture above it looks like a bar has been welded to a flat spot ground on the top of the attachment point for the bren... such a piece of steel would mimic the attachment point for an MG-3/Mg-42. With that piece of metal on there you will not be able to mount a Bren.

    Check BRP Guns inventory of parts.

  8. Thank You to WallyG. For This Useful Post:


  9. #4
    Advisory Panel browningautorifle's Avatar
    Join Date
    Jul 2008
    Last On
    Yesterday @ 10:15 PM
    Location
    Victoria BC
    Posts
    30,340
    Real Name
    Jim
    Local Date
    10-07-2024
    Local Time
    11:33 PM
    Quote Originally Posted by WallyG. View Post
    a bar has been welded to a flat spot ground on the top of the attachment point for the bren
    So it is. I'd just make that all gone myself...carefully. There were lots of these altered for other things.
    Regards, Jim

  10. Thank You to browningautorifle For This Useful Post:


  11. #5
    Legacy Member cal50's Avatar
    Join Date
    Mar 2019
    Last On
    Yesterday @ 04:33 PM
    Location
    Ohio
    Posts
    117
    Local Date
    10-08-2024
    Local Time
    02:33 AM
    Thread Starter
    Good eye on the added metal bar , I completely missed it and looking for missing parts and adjusting the ones I have.

    Its easy to remove metal......I will take care of the front attachment point but if I need a replacement its an obtainable part.
    Removing the paint from the , got most of it off but the traverse clamp is still not firmly clamping it.

    How is the clamp nut on the bottom removed?
    Its number 27




    Can it be removed or unscrewed or does the clamp arm / lever need to be removed to adjust it ?

  12. #6
    Legacy Member cal50's Avatar
    Join Date
    Mar 2019
    Last On
    Yesterday @ 04:33 PM
    Location
    Ohio
    Posts
    117
    Local Date
    10-08-2024
    Local Time
    02:33 AM
    Thread Starter
    Pulled the pintle out , that's an easy fix and glad the guy that welded it was not a great welder, not much penetration.

    To adjust the T&E tension clamp can I just pull lever #26 then reposition for correct clamping force then re-pin it ?

  13. #7
    Legacy Member WallyG.'s Avatar
    Join Date
    Jan 2008
    Last On
    07-07-2024 @ 10:49 AM
    Location
    Heart of Dixie
    Age
    62
    Posts
    126
    Local Date
    10-08-2024
    Local Time
    01:33 AM
    If it is not clamping completely before running out of adjustment throw... how about adding a washer of shim material to the stack to allow for quicker clamping... it probably would not take very much to get the hard lockup you are seeking. Thoughts?

  14. #8
    Advisory Panel browningautorifle's Avatar
    Join Date
    Jul 2008
    Last On
    Yesterday @ 10:15 PM
    Location
    Victoria BC
    Posts
    30,340
    Real Name
    Jim
    Local Date
    10-07-2024
    Local Time
    11:33 PM
    Quote Originally Posted by cal50 View Post
    To adjust the T&E tension clamp can I just pull lever #26 then reposition for correct clamping force then re-pin it ?
    Yes. That will work too. Turn the screw by hand until snug and then set the handle where you want it. Try it a couple of times and then tap it down the splines again.
    Regards, Jim

  15. #9
    Legacy Member cal50's Avatar
    Join Date
    Mar 2019
    Last On
    Yesterday @ 04:33 PM
    Location
    Ohio
    Posts
    117
    Local Date
    10-08-2024
    Local Time
    02:33 AM
    Thread Starter
    Looks like I will remove the retaining pin then pull the handle to adjust clamp tension.
    It travels a lot smoothly with the paint removed.

  16. Thank You to cal50 For This Useful Post:


  17. #10
    Advisory Panel browningautorifle's Avatar
    Join Date
    Jul 2008
    Last On
    Yesterday @ 10:15 PM
    Location
    Victoria BC
    Posts
    30,340
    Real Name
    Jim
    Local Date
    10-07-2024
    Local Time
    11:33 PM
    Quote Originally Posted by cal50 View Post
    It travels a lot smoothly with the paint removed.
    It should have been blued or parkerized and then the upper surfaces painted. Lazy man's way to paint is with a spray can and cover everything. You have to be able to manipulate it after all...
    Regards, Jim

+ Reply to Thread
Page 1 of 6 1 2 3 ... LastLast

Similar Threads

  1. Bren gun tripod missing parts
    By Ewout in forum The Bren LMG (Light Machine Gun)
    Replies: 16
    Last Post: 04-20-2019, 07:08 PM
  2. Finish on AA leg Bren tripod ?
    By tr63 in forum The Bren LMG (Light Machine Gun)
    Replies: 6
    Last Post: 09-02-2017, 08:53 PM
  3. Bren Tripod Color
    By redleg105 in forum The Bren LMG (Light Machine Gun)
    Replies: 10
    Last Post: 02-23-2014, 02:18 AM
  4. Bren Tripod used in battle?
    By redleg105 in forum The Bren LMG (Light Machine Gun)
    Replies: 4
    Last Post: 01-05-2014, 09:30 AM
  5. WTB Looking For a Bren Tripod Pintle
    By Albayo in forum The Bren LMG (Light Machine Gun)
    Replies: 2
    Last Post: 02-26-2012, 02:52 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts