I like both of your rifles Mr. Clark. I have two 1903A4 snipers. One with a Lyman like yours except an M82. The other with a Weaver M73B1. The Lyman is so much better that I seldom shoot the one with the Weaver which still has it's NRA sale tag from the 1950's or 60's. I always considered the Weaver a .22 riflescope to be honest. Your Maltby also looks great. a small critique is that you need to refit your front handguard so it doesn't contact the front sight base. As far as the spirit based stains. They are available over here from Brownells but very expensive. A small 4 ounce bottle running about $30. I was buying Chestnut Ridge for $28 in a 16 ounce bottle! I recently restored a 1943 No.4Mk.1T and used Minwax dark walnut oil based stain on the new reproduction cheek rest. It seemed to do OK and blended well with the S/A marked nos beech. The rifle had been sporterized and still retained the original buttstock so I traded out the customer supplied beech rear handguard for a grooved British walnut one. It looks as it should but there is a bit of contrast in the wood color. Managed a 2" group at 100 yards during the range test a couple of days ago with a perfect bracket from DRP and Mk.1 scope supplied by the customer. I had a couple of rounds touching so the rifle is probably capable of MOA at 100 yards. I just can't hold them anymore with my arthritic shoulders, arms and hands! Keep up the good work.