Shooting Cast Bullets

[Jonzie]

I finally made time to get some range time in with the cast loads I made.
The Load is 13 grains of red dot with Bullets I cast using the Lee C-309-150F
Mold. The range is at 100 yards using Iron Sights with my 1903A3.





[ATTACH]126046[/ATTACH

Information

Warning: This is a relatively older thread This discussion is older than 360 days. Some information contained in it may no longer be current.

[browningautorifle]

So, this is a gas check bullet? Looks like they're all there anyway, I have enough pistol powders too I should try some of that with .308 and 30/30. No keyholes anyway...I can't do anything with iron sights any more.

[Jonzie]

Yes, they are gas check bullets I usually just plink off hand at gongs but wanted to try on paper, could be better but I have been noticing
the target gets a little blurry the gongs are a little larger and I do a little better. Nice having less recoil.

[browningautorifle]

I had to stop offhand because my control isn't what it was, eyesight is failing too. I use those same bullets with 30/30.

[Jonzie]

I do ok for a little while then start to get tired offhand and call it a day. As far as my vision I guess I will shorten the distance of the target or try
using a scope.