+ Reply to Thread
Results 1 to 8 of 8

Thread: Added another piece of WWl Trench art

Click here to increase the font size Click here to reduce the font size
  1. #1
    FREE MEMBER
    NO Posting or PM's Allowed
    A. F Medic's Avatar
    Join Date
    Mar 2009
    Last On
    07-10-2019 @ 05:44 PM
    Location
    Erie Pa
    Posts
    1,141
    Local Date
    04-27-2024
    Local Time
    10:44 PM

    Added another piece of WWl Trench art

    I started buying these items as they are not that expensive and hard to reproduce (Date is on bottom of casing).

    This one is a Germanicon 77mm (3 inch) dated June 1917. Was used as a flower vase. Roughly done with the Signal Corp flags on one the sides(?) and the 5th Division logo on the other side. Their logo is a diamond or two triangles stacked on top of one another.

    Bottom of casing shows 65%CU or 65% copper with a ST or strenghtened case.

    This was known as the "Whiz Bang" or the first artillery shell to go supersonic. The US troops did not like them as you could not hear them coming and they were about a 14 lb explosive round.

    Fired from the 7.7 cm FieldKanone.

    Trench Art: An Illustrated History, by Jane Kimball
    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.

  2. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Location
    Milsurps.Com
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  3. #2
    (Deceased April 21, 2018) John Sukey (Deceased)'s Avatar
    Join Date
    Nov 2006
    Last On
    05-14-2012 @ 06:03 PM
    Location
    Tucson Arizona
    Posts
    762
    Local Date
    04-27-2024
    Local Time
    07:44 PM
    Reminded me of a 37 mm round I got many years ago. engraved
    Argonne Forest Sept 26-28-18

    Headstamp
    37-85
    PDPs
    158
    9.17

    while I am at it, three boxes made of artillery rounds
    4.5 inch HOW 1915

    75mm FG
    Blank M9
    Scovill
    and dated 1918

    Two 18pdr ashtrays
    One dated 1911
    and the other dated 1915

    Last of all what appears to be a FN 75mm with a german silver coin embedded where the primer would be.dated 1915 and a R.A badge on the side.

    One more item, What appears to be half of three Lebel rounds soldered together, the bulllets bent to form the legs. two rounds have small brass plaques on them, One british and one American, while the third shows a cannon. possibly a pencil holder or bud vase?
    I don't think the boxes or the last items are truly "trench Art" but rather made up by the locals to sell to the "ami's" as souveniers, but I may be wrong.
    Last edited by John Sukey (Deceased); 04-08-2009 at 04:10 PM.

  4. Avoid Ads - Become a Contributing Member - Click HERE
  5. #3
    FREE MEMBER
    NO Posting or PM's Allowed
    A. F Medic's Avatar
    Join Date
    Mar 2009
    Last On
    07-10-2019 @ 05:44 PM
    Location
    Erie Pa
    Posts
    1,141
    Local Date
    04-27-2024
    Local Time
    10:44 PM
    Thread Starter

    Trench art

    John,

    Fine start on trench art. Please google Trench Art and you may find out what you have. I have never seen one like that made out of cartridges.

    One of mine is a 8mm cartridge with bullet attached. The cartridge has a Germanicon button attached to it. The bullet has been split and a piece of shell casing attached to it as a letter opener. It says "St Mihiel" stippled on it. That took awhile to do by stippling it.

    From what I read, most art was done way behind the lines. They had to take to an empty (frowned on as it was salvage brass) casing, fill it full of sand or dirt and start the process.

    Remember, just like our rifles, there won't be anymore. That includes the artillery boxes. I think of trench art as tramp type art. There were some great metal workers out there! Most were not signed as the soldier was concerned that they would then have the piece traced back to them.!

  6. #4
    Legacy Member Sully's Avatar
    Join Date
    Mar 2009
    Last On
    01-17-2021 @ 11:16 PM
    Posts
    17
    Local Date
    04-27-2024
    Local Time
    06:44 PM
    As a landscaper, I was on a job in North Hollywood and found out the now deceased father was a veteran of Iwo Jima. He had created a light standard in the front lawn with an artillery shell holding the light fixture. It was well done as you might not notice it unless you were observant...

    best,

    Sully

  7. #5
    FREE MEMBER
    NO Posting or PM's Allowed
    conductor's Avatar
    Join Date
    Mar 2009
    Last On
    12-01-2013 @ 08:17 PM
    Location
    Loudoun County, Virginia
    Posts
    94
    Local Date
    04-27-2024
    Local Time
    09:44 PM
    I've been buying similar stuff from WW2. I have a nice cigar humidore made from two 105mm shell casings. The top of the humidore is the base of a 105 case that has been turned down to fit inside the mouth of another shortened 105 case. I have several ashtrays, one of which is engraved "Bouganville - Empress Augusta Bay - Nov. 1943". I have seen an ashtray that was made from a 105 shell that was presented to General Vandegrift by a Marine Artillery unit. It was marked "First Round Fired Against The Japs on Guadalcanal". I haven't been able to buy that one yet, but I'm still trying.

  8. #6
    Legacy Member smle-man's Avatar
    Join Date
    Mar 2009
    Last On
    12-28-2021 @ 09:47 PM
    Posts
    113
    Local Date
    04-27-2024
    Local Time
    06:44 PM
    I used to encounter WW1 trench art at rummage sales and yard sales frequently in the 70s but at that time as a young 'un I found it interesting but not anything I could spend my few dollars on. I don't see much of it anymore and what I do see has some pretty hefty prices attached to it.

  9. #7
    FREE MEMBER
    NO Posting or PM's Allowed
    joem's Avatar
    Join Date
    Mar 2009
    Last On
    03-01-2016 @ 08:56 PM
    Posts
    208
    Local Date
    04-27-2024
    Local Time
    08:44 PM
    I have two vase made from 105's and two knives from WWll south pacific marked Leyte Gulf. The smaller knife has a coin inleted is the wooden sheath. The cion appears to be a dime dated 1944. These were my Dads.

  10. #8
    (Deceased April 21, 2018) John Sukey (Deceased)'s Avatar
    Join Date
    Nov 2006
    Last On
    05-14-2012 @ 06:03 PM
    Location
    Tucson Arizona
    Posts
    762
    Local Date
    04-27-2024
    Local Time
    07:44 PM
    AF Medic, while You mentioned what I have is a fine start it is also the end as well since I no longer collect that stuff. The only other odd thing I have is a tea caddy in the shape of a 15pdr projectile. By its condition, I would assume it was made during WW1. (made out of tin) It has suffered over the years. Can just make out on the bottom,
    Registered Design
    Printed by
    the
    Britishicon & Benningtons tea trading ASSOn Limited.
    118 Southwark London
    there is a printed shield on the side, but it is too worn to read.
    Last edited by John Sukey (Deceased); 04-09-2009 at 03:59 PM.

+ Reply to Thread

Similar Threads

  1. Finnish Sneak, w/cheek piece
    By sdh1911 in forum Milsurps General Discussion Forum
    Replies: 0
    Last Post: 07-08-2007, 05:58 PM
  2. Lithgow forend reinforcing piece on e***
    By Cantom in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 2
    Last Post: 01-25-2007, 07:14 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts